Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 4 Aug 1999 02:17:37 -0600
From:      "Dragon Knight ][" <dragonk@mato.com>
To:        "Andy V. Oleynik" <andyo@prime.net.ua>
Cc:        <freebsd-questions@FreeBSD.ORG>
Subject:   Re: user ppp problem.
Message-ID:  <000d01bede51$d29a5700$0201a8c0@dragonknight.yi.org>
References:  <000c01beddd5$53c14460$0201a8c0@dragonknight.yi.org> <001d01bede20$107b7a40$0201a8c0@dragonknight.yi.org> <37A7EFE7.42965D8D@prime.net.ua>

next in thread | previous in thread | raw e-mail | index | archive | help
> >      10:02:58 dragonknight ppp[5574]: Phase: Pap Input: SUCCESS
> >      (Login Succeeded)
> >      Aug  3 10:02:58 dragonknight ppp[5574]: Phase: deflink: lcp
> >      -> open
> >      Aug  3 10:02:58 dragonknight ppp[5574]: Phase: bundle:
> >      Network
> >      Aug  3 10:03:59 dragonknight ppp[5574]: Phase: deflink: HDLC
> >      errors -> FCS: 1, ADDR: 0, COMD: 0, PROTO: 0
> >
> >
> 55574 and terminated 73 appears to be different processes. I had the
> same HDLC msg on my mppp link
> on startup but it's running since 1 July w/o any trouble. Do U running a
> couple of ppp instances?
> do "ps ax|grep ppp" after U have this msg.
> 

i'm only running one instance of ppp



> >      Aug  3 10:13:31 dragonknight ppp[73]: Phase: deflink: HDLC
> >      errors -> FCS: 1, ADDR: 0, COMD: 0, PROTO: 0
> >      Aug  3 12:13:22 dragonknight ppp[73]: Phase: Signal 15,
> >      terminate.
> >
> Sig 15 - is software SIGTERM from explicit kill. Do U interrrupt ppp by
> urself?
> 

yes, i had to..   it wouldn't ever un-hang otherwise... until i added 
enable lqr to my ppp.conf.


> >      here's my ppp.conf if it matters.
> >
> >      default:
> >        set device /dev/cuaa1
> >        set speed 115200
> >        set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 60 \"\"
> >      ATE1Q0 OK-AT-OK \\dATDT\\TTIMEOUT 40 CONNECT"
> >        deny lqr
> >        allow users dragonk
> >      ISP:
> >        set phone -------
> >        set login
> >        set authname ***
> >        set authkey ***
> >        set timeout 300
> >
> timeout 300 will cause ppp drop the link after 5 min idle.
> 

I know.   is there a problem with 300?

> >
> >        set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0
> >        delete ALL
> >        add default HISADDR thanks much.
> >




To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?000d01bede51$d29a5700$0201a8c0>