Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 08 Mar 2012 10:00:30 +0100
From:      Damien Fleuriot <ml@my.gd>
To:        bo wang <wowopla@gmail.com>, questions@freebsd.org
Subject:   Re: Fwd: Some questions about Link Aggregation and Failover
Message-ID:  <4F58752E.2010405@my.gd>
In-Reply-To: <CAAy2jpHXvCGS%2BhvqreJuCrSGdaO4YsZTJsiN-UBUKsMWPWx=Jw@mail.gmail.com>
References:  <CAAy2jpE=KNm9YtVPznBUb3tzWJ6Nf92YCS-xmT0dBGfEmJ8qjw@mail.gmail.com> <CAAy2jpEQ5RBQbk-qMo5VMuOok3jZ=WxCDRowwvD8mmDqUoGOww@mail.gmail.com> <4F5818A4.20509@hdk5.net> <CAAy2jpEvRgo5mPueG1BYjVHCQjkupmoEi9pR%2BfFFKNYG2tAbpg@mail.gmail.com> <CAAy2jpF3=qXgSzYVonoqQN4JisyqrKoUgS=DH6UKtHa37beY-A@mail.gmail.com> <CAAy2jpHXvCGS%2BhvqreJuCrSGdaO4YsZTJsiN-UBUKsMWPWx=Jw@mail.gmail.com>

next in thread | previous in thread | raw e-mail | index | archive | help
>From your switch, run the following tests:


core1.drt.hi-media#test etherchannel load-balance interface port-channel
2 ip 1.2.3.4 5.6.7.8
Would select Gi1/1/1 of Po2

core1.drt.hi-media#test etherchannel load-balance interface port-channel
2 ip 1.2.3.4 5.6.7.9
Would select Gi2/1/1 of Po2

core1.drt.hi-media#test etherchannel load-balance interface port-channel
2 ip 1.2.3.4 5.6.7.10
Would select Gi2/1/1 of Po2



Of course, you'll want to adjust with your own servers and PC IP addresses.






On 3/8/12 9:33 AM, bo wang wrote:
> ---------- Forwarded message ----------
> From: bo wang <wowopla@gmail.com>
> Date: 2012/3/8
> Subject: Re: Some questions about Link Aggregation and Failover
> To: noc@hdk5.net
> 
> 
> Hello:
>     Please see the picture 1 that is my test before.Doing 2 group in
> c3750.When I use PC and server2 to connect server1 fpt server for
> download. I find the server1 just use 1 port of lagg, other ports
> don't work.
>     Then I change my test , picture2 is showed. I do only 1 group in
> c3750 for server1. And do the same test.I find that there are two
> ports of lagg work.The lagg0 top speed can be 140MB/s (server2 speed
> is 100MB/S, PC speed is 40MB/s)  It can increase top speed.
>     So  what can I do for doinig two group in a switch?
> 
> 
> 
> 2012/3/8 bo wang <wowopla@gmail.com>:
>> Sorry,I can't understand what your meaning.
>>
>> Switch#show etherchannel
>>                Channel-group listing:
>>                ----------------------
>>
>> Group: 1
>> ----------
>> Group state = L2
>> Ports: 2   Maxports = 16
>> Port-channels: 1 Max Port-channels = 16
>> Protocol:   LACP
>> Minimum Links: 0
>>
>> Group: 2
>> ----------
>> Group state = L2
>> Ports: 2   Maxports = 16
>> Port-channels: 1 Max Port-channels = 16
>> Protocol:   LACP
>> Minimum Links: 0
>>
>>
>> Switch#show etherchannel detail
>>                Channel-group listing:
>>                ----------------------
>>
>> Group: 1
>> ----------
>> Group state = L2
>> Ports: 2   Maxports = 16
>> Port-channels: 1 Max Port-channels = 16
>> Protocol:   LACP
>> Minimum Links: 0
>>                Ports in the group:
>>                -------------------
>> Port: Gi1/0/1
>> ------------
>>
>> Port state    = Up Mstr Assoc In-Bndl
>> Channel group = 1           Mode = Active          Gcchange = -
>> Port-channel  = Po1         GC   =   -             Pseudo port-channel = Po1
>> Port index    = 0           Load = 0x00            Protocol =   LACP
>>
>> Flags:  S - Device is sending Slow LACPDUs   F - Device is sending fast LACPDUs.
>>        A - Device is in active mode.        P - Device is in passive mode.
>>
>> Local information:
>>                            LACP port     Admin     Oper    Port        Port
>> Port      Flags   State     Priority      Key       Key     Number      State
>> Gi1/0/1   SA      bndl      32768         0x1       0x1     0x102       0x3D
>>
>> Partner's information:
>>
>>                  LACP port                        Admin  Oper   Port    Port
>> Port      Flags   Priority  Dev ID          Age    key    Key    Number  State
>> Gi1/0/1   SA      32768     0010.18c0.af20  24s    0x0    0x250  0x3     0x3D
>>
>> Age of the port in the current state: 12d:22h:41m:09s
>>
>> Port: Gi1/0/2
>> ------------
>>
>> Port state    = Up Mstr Assoc In-Bndl
>> Channel group = 1           Mode = Active          Gcchange = -
>> Port-channel  = Po1         GC   =   -             Pseudo port-channel = Po1
>> Port index    = 0           Load = 0x00            Protocol =   LACP
>>
>> Flags:  S - Device is sending Slow LACPDUs   F - Device is sending fast LACPDUs.
>>        A - Device is in active mode.        P - Device is in passive mode.
>>
>> Local information:
>>                            LACP port     Admin     Oper    Port        Port
>> Port      Flags   State     Priority      Key       Key     Number      State
>> Gi1/0/2   SA      bndl      32768         0x1       0x1     0x103       0x3D
>>
>> Partner's information:
>>
>>                  LACP port                        Admin  Oper   Port    Port
>> Port      Flags   Priority  Dev ID          Age    key    Key    Number  State
>> Gi1/0/2   SA      32768     0010.18c0.af20  26s    0x0    0x250  0x4     0x3D
>>
>> Age of the port in the current state: 12d:22h:41m:15s
>>
>>                Port-channels in the group:
>>                ---------------------------
>>
>> Port-channel: Po1    (Primary Aggregator)
>>
>> ------------
>>
>> Age of the Port-channel   = 12d:22h:41m:21s
>> Logical slot/port   = 10/1          Number of ports = 2
>> HotStandBy port = null
>> Port state          = Port-channel Ag-Inuse
>> Protocol            =   LACP
>> Port security       = Disabled
>>
>> Ports in the Port-channel:
>>
>> Index   Load   Port     EC state        No of bits
>> ------+------+------+------------------+-----------
>>  0     00     Gi1/0/1  Active             0
>>  0     00     Gi1/0/2  Active             0
>>
>> Time since last port bundled:    12d:22h:41m:17s    Gi1/0/1
>>
>> Group: 2
>> ----------
>> Group state = L2
>> Ports: 2   Maxports = 16
>> Port-channels: 1 Max Port-channels = 16
>> Protocol:   LACP
>> Minimum Links: 0
>>                Ports in the group:
>>                -------------------
>> Port: Gi1/0/13
>> ------------
>>
>> Port state    = Up Mstr Assoc In-Bndl
>> Channel group = 2           Mode = Active          Gcchange = -
>> Port-channel  = Po2         GC   =   -             Pseudo port-channel = Po2
>> Port index    = 0           Load = 0x00            Protocol =   LACP
>>
>> Flags:  S - Device is sending Slow LACPDUs   F - Device is sending fast LACPDUs.
>>        A - Device is in active mode.        P - Device is in passive mode.
>>
>> Local information:
>>                            LACP port     Admin     Oper    Port        Port
>> Port      Flags   State     Priority      Key       Key     Number      State
>> Gi1/0/13  SA      bndl      32768         0x2       0x2     0x10E       0x3D
>>
>> Partner's information:
>>
>>                  LACP port                        Admin  Oper   Port    Port
>> Port      Flags   Priority  Dev ID          Age    key    Key    Number  State
>> Gi1/0/13  SA      32768     0010.18c0.af7c  28s    0x0    0x250  0x3     0x3D
>>
>> Age of the port in the current state: 12d:22h:39m:21s
>>
>> Port: Gi1/0/14
>> ------------
>>
>> Port state    = Up Mstr Assoc In-Bndl
>> Channel group = 2           Mode = Active          Gcchange = -
>> Port-channel  = Po2         GC   =   -             Pseudo port-channel = Po2
>> Port index    = 0           Load = 0x00            Protocol =   LACP
>>
>> Flags:  S - Device is sending Slow LACPDUs   F - Device is sending fast LACPDUs.
>>        A - Device is in active mode.        P - Device is in passive mode.
>>
>> Local information:
>>                            LACP port     Admin     Oper    Port        Port
>> Port      Flags   State     Priority      Key       Key     Number      State
>> Gi1/0/14  SA      bndl      32768         0x2       0x2     0x10F       0x3D
>>
>> Partner's information:
>>
>>                  LACP port                        Admin  Oper   Port    Port
>> Port      Flags   Priority  Dev ID          Age    key    Key    Number  State
>> Gi1/0/14  SA      32768     0010.18c0.af7c  29s    0x0    0x250  0x4     0x3D
>>
>> Age of the port in the current state: 12d:22h:39m:21s
>>
>>                Port-channels in the group:
>>                ---------------------------
>>
>> Port-channel: Po2    (Primary Aggregator)
>>
>> ------------
>>
>> Age of the Port-channel   = 12d:22h:39m:26s
>> Logical slot/port   = 10/2          Number of ports = 2
>> HotStandBy port = null
>> Port state          = Port-channel Ag-Inuse
>> Protocol            =   LACP
>> Port security       = Disabled
>>
>> Ports in the Port-channel:
>>
>> Index   Load   Port     EC state        No of bits
>> ------+------+------+------------------+-----------
>>  0     00     Gi1/0/13 Active             0
>>  0     00     Gi1/0/14 Active             0
>>
>> Time since last port bundled:    12d:22h:39m:22s    Gi1/0/14
>>
>>
>>
>>
>> 2012/3/8 Al Plant <noc@hdk5.net>:
>>> bo wang wrote:
>>>>
>>>> Thank your for reply.
>>>>  First,I think the Link Aggregation can't support too much ports
>>>> aggregation.So I change the configure, just get together two
>>>> ports.Below are configuration information of c3750:
>>>
>>>
>>>
>>> ??? > Switch#show eth 1 sum  Check your eth discriptor this is for Linux  is
>>> not for FreeBSD use ed0 or other FreeBSD
>>>
>>>
>>>
>>>> Flags:  D - down        P - bundled in port-channel
>>>>       I - stand-alone s - suspended
>>>>       H - Hot-standby (LACP only)
>>>>       R - Layer3      S - Layer2
>>>>       U - in use      f - failed to allocate aggregator
>>>>
>>>>       M - not in use, minimum links not met
>>>>       u - unsuitable for bundling
>>>>       w - waiting to be aggregated
>>>>       d - default port
>>>>
>>>>
>>>> Number of channel-groups in use: 2
>>>> Number of aggregators:           2
>>>>
>>>> Group  Port-channel  Protocol    Ports
>>>>
>>>> ------+-------------+-----------+-----------------------------------------------
>>>> 1      Po1(SU)         LACP      Gi1/0/1(P)  Gi1/0/2(P)
>>>>
>>>>
>>>> Switch#show lacp neighbor
>>>> Flags:  S - Device is requesting Slow LACPDUs
>>>>       F - Device is requesting Fast LACPDUs
>>>>       A - Device is in Active mode       P - Device is in Passive mode
>>>>
>>>> Channel group 1 neighbors
>>>>
>>>> Partner's information:
>>>>
>>>>                 LACP port                        Admin  Oper   Port
>>>>  Port
>>>> Port      Flags   Priority  Dev ID          Age    key    Key    Number
>>>>  State
>>>> Gi1/0/1   SA      32768     0010.18c0.af20   4s    0x0    0x250  0x3
>>>> 0x3D
>>>> Gi1/0/2   SA      32768     0010.18c0.af20   4s    0x0    0x250  0x4
>>>> 0x3D
>>>>
>>>> Channel group 2 neighbors
>>>>
>>>> Partner's information:
>>>>
>>>>                 LACP port                        Admin  Oper   Port
>>>>  Port
>>>> Port      Flags   Priority  Dev ID          Age    key    Key    Number
>>>>  State
>>>> Gi1/0/13  SA      32768     0010.18c0.af7c   1s    0x0    0x250  0x3
>>>> 0x3D
>>>> Gi1/0/14  SA      32768     0010.18c0.af7c   1s    0x0    0x250  0x4
>>>> 0x3D
>>>>
>>>>
>>>> Switch#show lacp neighbor detail
>>>> Flags:  S - Device is requesting Slow LACPDUs
>>>>       F - Device is requesting Fast LACPDUs
>>>>       A - Device is in Active mode       P - Device is in Passive mode
>>>>
>>>> Channel group 1 neighbors
>>>>
>>>> Partner's information:
>>>>
>>>>
>>>>         Partner               Partner                     Partner
>>>> Port      System ID             Port Number     Age         Flags
>>>> Gi1/0/1   32768,0010.18c0.af20  0x3              13s        SA
>>>>
>>>>         LACP Partner         Partner         Partner
>>>>         Port Priority        Oper Key        Port State
>>>>         32768                0x250           0x3D
>>>>
>>>>         Port State Flags Decode:
>>>>         Activity:   Timeout:   Aggregation:   Synchronization:
>>>>         Active      Long       Yes            Yes
>>>>
>>>>         Collecting:   Distributing:   Defaulted:   Expired:
>>>>         Yes           Yes             No           No
>>>>
>>>>         Partner               Partner                     Partner
>>>> Port      System ID             Port Number     Age         Flags
>>>> Gi1/0/2   32768,0010.18c0.af20  0x4              14s        SA
>>>>
>>>>         LACP Partner         Partner         Partner
>>>>         Port Priority        Oper Key        Port State
>>>>         32768                0x250           0x3D
>>>>
>>>>         Port State Flags Decode:
>>>>         Activity:   Timeout:   Aggregation:   Synchronization:
>>>>         Active      Long       Yes            Yes
>>>>
>>>>         Collecting:   Distributing:   Defaulted:   Expired:
>>>>         Yes           Yes             No           No
>>>>
>>>> Channel group 2 neighbors
>>>>
>>>> Partner's information:
>>>>
>>>>
>>>>         Partner               Partner                     Partner
>>>> Port      System ID             Port Number     Age         Flags
>>>> Gi1/0/13  32768,0010.18c0.af7c  0x3              15s        SA
>>>>
>>>>         LACP Partner         Partner         Partner
>>>>         Port Priority        Oper Key        Port State
>>>>         32768                0x250           0x3D
>>>>
>>>>         Port State Flags Decode:
>>>>         Activity:   Timeout:   Aggregation:   Synchronization:
>>>>         Active      Long       Yes            Yes
>>>>
>>>>         Collecting:   Distributing:   Defaulted:   Expired:
>>>>         Yes           Yes             No           No
>>>>
>>>>         Partner               Partner                     Partner
>>>> Port      System ID             Port Number     Age         Flags
>>>> Gi1/0/14  32768,0010.18c0.af7c  0x4              16s        SA
>>>>
>>>>         LACP Partner         Partner         Partner
>>>>         Port Priority        Oper Key        Port State
>>>>         32768                0x250           0x3D
>>>>
>>>>         Port State Flags Decode:
>>>>         Activity:   Timeout:   Aggregation:   Synchronization:
>>>>         Active      Long       Yes            Yes
>>>>
>>>>         Collecting:   Distributing:   Defaulted:   Expired:
>>>>         Yes           Yes             No           No
>>>>
>>>> 2012/3/7 bo wang <wowopla@gmail.com>:
>>>>>
>>>>> Hello:
>>>>>     Recently I want to do Link Aggregation for increasing the
>>>>> speed. I use a Cisco 3750 Switche and two IBM Server R       with BSD
>>>>> 9.0 .I do link aggregation According to this page.
>>>>>     http://www.freebsd.org/doc/en/books/handbook/network-aggregation.html
>>>>>     I use LACP .But when i have done ,the link aggregation  only can
>>>>> do Failover  .It cann't increase the  speed. What is the
>>>>> problem?Detailed configuration as follows
>>>>>
>>>>> in the BSD9.0  /etc/rc.conf
>>>>> hostname="bbc04"
>>>>> ifconfig_bce2="up"
>>>>> ifconfig_bce3="up"
>>>>> ifconfig_bce4="up"
>>>>> ifconfig_bce5="up"
>>>>> ifconfig_bce6="up"
>>>>> ifconfig_bce7="up"
>>>>> cloned_interfaces="lagg0"
>>>>> ifconfig_lagg0="laggproto loadbalance laggport bce2 laggport bce3
>>>>> laggport bce4 laggport bce5 laggport bce6 laggport bce7"
>>>>> ipv4_addrs_lagg0="172.16.60.64/16"
>>>>> defaultrouter="172.16.0.1"
>>>>> sshd_enable="YES"
>>>>> pureftpd_enable="YES"
>>>>> # Set dumpdev to "AUTO" to enable crash dumps, "NO" to disable
>>>>> dumpdev="NO"
>>>>>
>>>>> the Cisco 3750 configure
>>>>> interface range gigabitEthernet 1/0/1-6
>>>>> channel-proto lacp
>>>>> channel-group 1 mode active
>>>>>
>>>>>
>>>>> interface range gigabitEthernet 1/0/13-18
>>>>> channel-proto lacp
>>>>> channel-group 2 mode active
>>>>
>>>> _______________________________________________
>>>>
>>>> freebsd-questions@freebsd.org mailing list
>>>> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
>>>> To unsubscribe, send any mail to
>>>> "freebsd-questions-unsubscribe@freebsd.org"
>>>>
>>>
>>>
>>> --
>>>
>>> ~Al Plant - Honolulu, Hawaii -  Phone:  808-284-2740
>>>  + http://hawaiidakine.com + http://freebsdinfo.org +
>>>  + http://aloha50.net   - Supporting - FreeBSD  7.2 - 8.0 - 9* +
>>>  < email: noc@hdk5.net >
>>> "All that's really worth doing is what we do for others."- Lewis Carrol
>>>



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4F58752E.2010405>