Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 29 May 2003 12:19:15 -0700 (PDT)
From:      Baby Peanut <baby_p_nut@yahoo.com>
To:        freebsd-sparc64@FreeBSD.org
Subject:   FreeBSD 5.1-BETA2 CD-ROM on Ultra-2 with isp
Message-ID:  <20030529191915.25230.qmail@web41315.mail.yahoo.com>

next in thread | raw e-mail | index | archive | help
This is the first CD-ROM I have seen boot up FreeBSD on this crate.

Binary upgrade fails since it does not detect the SCSI CD-ROM drive.

isp0 mem 0x10000-0x1044f irq 2011 on sbus0
Timecounters tick every 10.000 msec
Waiting 15 seconds for SCSI devices to settle
da0 at isp0 bus 0 target 2 lun 0
da0: <SEAGATE ST318404LSUN18G 5221> Fixed Direct Access SCSI-3 device 
da0: 20.000MB/s transfers (10.000MHz, offset 12, 16bit), Tagged Queueing
Enabled
da0: 17274MB (35378533 512 byte sectors: 255H 63S/T 2202C)
SMP: AP CPU #1 Launched!



the fix-it shell goes:

DEBUG: Doctor: I can't set the controlling terminal.

but mostly works.  I got stuck somehow while using it and could only make the
system respond with the "abort the installation?" dialog by hitting the
interrupt key.  I hit enter to abort and it paniced with the usual
initiate_write_inodeblock_ufs1: already started
message

boot() called on cpu#0
Waiting (max 60 seconds) for system process `vnlru' to stop...stopped
Waiting (max 60 seconds) for system process `bufdaemon' to stop...stopped
Waiting (max 60 seconds) for system process `syncer' to stop...stopped

syncing disks, buffers remaining... 14 13 13 4 panic:
initiate_write_inodeblock_ufs1: already started
cpuid = 1; 
Debugger("panic")
Stopped at      Debugger+0x1c:  ta              %xcc, 1
db> t
panic() at panic+0x134
initiate_write_inodeblock_ufs1() at initiate_write_inodeblock_ufs1+0x32c
softdep_disk_io_initiation() at softdep_disk_io_initiation+0x80
spec_xstrategy() at spec_xstrategy+0x134
spec_specstrategy() at spec_specstrategy+0x8
spec_vnoperate() at spec_vnoperate+0x1c
bwrite() at bwrite+0x3b8
vfs_bio_awrite() at vfs_bio_awrite+0x1a0
vop_stdfsync() at vop_stdfsync+0x120
spec_fsync() at spec_fsync+0x20
spec_vnoperate() at spec_vnoperate+0x1c
ffs_sync() at ffs_sync+0x348
sync() at sync+0xcc
boot() at boot+0x25c
reboot() at reboot+0x34
syscall() at syscall+0x2a8
-- syscall (55, FreeBSD ELF64, reboot) %o7=0x1dcf88 --
userland() at 0x246e88
user trace: trap %o7=0x1dcf88
pc 0x246e88, sp 0x7fdffffda31
pc 0x209264, sp 0x7fdffffdaf1
pc 0x1dd09c, sp 0x7fdffffdc81
pc 0x29f380, sp 0x7fdffffdd61
pc 0x22346c, sp 0x7fdffffe121
pc 0x1ddcf4, sp 0x7fdffffe1e1
pc 0x1d1830, sp 0x7fdffffe2e1
pc 0x209264, sp 0x7fdffffe3a1
pc 0x1ce4f0, sp 0x7fdffffe541
pc 0x1ce1b0, sp 0x7fdffffea21
pc 0x1cde0c, sp 0x7fdffffeaf1
pc 0x209264, sp 0x7fdffffebb1
pc 0x1ce4f0, sp 0x7fdffffedc1
pc 0x1d6f40, sp 0x7fdfffff2a1
pc 0x10038c, sp 0x7fdfffff371
pc 0x1001dc, sp 0x7fdfffff431
pc 0, sp 0x7fdfffff4f1
done
db>  show thread
Proc 0xfffff80045e19cb0 [CPU 1] sysinstall
db> show pcpu
cpuid        = 1
curthread    = 0xfffff80045e1cc60: pid 1 "sysinstall"
curpcb       = 0xdbab3980
fpcurthread  = none
idlethread   = 0xfffff80045e1ce70: pid 11 "idle: cpu1"
spin locks held:
db> 

__________________________________
Do you Yahoo!?
Yahoo! Calendar - Free online calendar with sync to Outlook(TM).
http://calendar.yahoo.com



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030529191915.25230.qmail>