Date: Mon, 23 Apr 2001 15:55:51 -0500 From: Josh Paetzel <jpaetzel@hutchtel.net> To: "Matthew Proctor" <matt@circusstreet.freeserve.co.uk>, <freebsd-questions@FreeBSD.ORG> Subject: Re: PCI bus not being probed Message-ID: <01042315555100.00269@mark9.vladsempire.net> In-Reply-To: <000601c0cc35$c3082dc0$69b2fea9@lyveden> References: <000601c0cc35$c3082dc0$69b2fea9@lyveden>
next in thread | previous in thread | raw e-mail | index | archive | help
On Monday 23 April 2001 15:41, Matthew Proctor wrote: > For some reason my machine is not detecting my PCI bus to even begin > probing it! > > Enclosed is uname -a, dmesg (from a boot -v) and my kernel config file. > > I am not entirely sure what motherboard I have - I think its a VXpro-II, > leastways thats what the largest chips on it have printed on them and I got > a hit on google when I searched for that name. > > The strangest thing is when I boot -c and go into UserConfig, I can SEE the > PCI bus! > You need to have device pci as a line in your kernel config. You've got device pci0, which I am surprised even compiles. Josh > Any help GREATLY appreciated > > thanks > Matt Proctor > matt@circusstreet.freeserve.co.uk > > -----uname -a------ > > > FreeBSD excise.proctor.org 3.4-RELEASE FreeBSD 3.4-RELEASE #0: Mon Apr 23 > > 09:03:30 BST 2001 root@excise.proctor.org:/usr/src/sys/compile/EXCISE > i386 > > > ---------------dmesg begins---------------- > > Copyright (c) 1992-1999 FreeBSD Inc. > > Copyright (c) 1982, 1986, 1989, 1991, 1993 > > The Regents of the University of California. All rights reserved. > > FreeBSD 3.4-RELEASE #0: Mon Apr 23 09:03:30 BST 2001 > > root@excise.proctor.org:/usr/src/sys/compile/EXCISE > > Calibrating clock(s) ... TSC clock: 133292414 Hz, i8254 clock: 1193392 Hz > > CLK_USE_I8254_CALIBRATION not specified - using default frequency > > Timecounter "i8254" frequency 1193182 Hz > > CLK_USE_TSC_CALIBRATION not specified - using old calibration method > > Timecounter "TSC" frequency 133270614 Hz > > CPU: Cyrix 6x86MX (133.27-MHz 686-class CPU) > > Origin = "CyrixInstead" Id = 0x600 Stepping = 0 DIR=0x0451 > > Features=0x80a135<FPU,DE,TSC,MSR,CX8,PGE,CMOV,MMX> > > real memory = 100663296 (98304K bytes) > > Physical memory chunk(s): > > 0x00001000 - 0x0009efff, 647168 bytes (158 pages) > > 0x00265000 - 0x05ffdfff, 98144256 bytes (23961 pages) > > avail memory = 95395840 (93160K bytes) > > Found BIOS32 Service Directory header at 0xc00fdb00 > > Entry = 0xfdb10 (0xc00fdb10) Rev = 0 Len = 1 > > PCI BIOS entry at 0xdb31 > > Other BIOS signatures found: > > ACPI: 00000000 > > $PnP: 000f8530 > > Preloaded elf kernel "kernel" at 0xc024c000. > > pci_open(1): mode 1 addr port (0x0cf8) is 0xc01eff40 > > pci_open(2): mode 2 enable port (0x0cf8) is 0xff > > Probing for devices on the ISA bus: > > atkbd: the current kbd controller command byte 0065 > > atkbd: keyboard ID 0x41ab (2) > > kbdc: RESET_KBD return code:00fa > > kbdc: RESET_KBD status:00aa > > sc0 on isa > > sc0: fb0 kbd0 > > sc0: VGA color <16 virtual consoles, flags=0x0> > > atkbdc0 at 0x60-0x6f on motherboard > > atkbd0 irq 1 on isa > > kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 > > sio0: irq maps: 0x9 0x19 0x9 0x9 > > sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa > > sio0: type 16550A > > sio1: irq maps: 0x1 0x9 0x1 0x1 > > sio1 at 0x2f8-0x2ff irq 3 on isa > > sio1: type 16550A > > fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa > > fdc0: FIFO enabled, 8 bytes threshold > > fd0: 1.44MB 3.5in > > wdc0 at 0x1f0-0x1f7 irq 14 flags 0xb0ff on isa > > wdc0: unit 0 (wd0): <FUJITSU MPB3021ATU>, LBA, 32-bit, multi-block-16 > > wd0: 2062MB (4224150 sectors), 523 cyls, 128 heads, 63 S/T, 512 B/S > > wd0: ATA INQUIRE valid = 0007, dmamword = 0407, apio = 0003, udma = 0007 > > wdc1 not found at 0x170 > > ppc: parallel port found at 0x378 > > ppc: chipset forced to generic > > ppc0: EPP SPP > > ppc0 at 0x378 irq 7 flags 0x40 on isa > > ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode > > lpt0: <generic printer> on ppbus 0 > > lpt0: Interrupt-driven port > > vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa > > fb0: vga0, vga, type:VGA (5), flags:0x7007f > > fb0: port:0x3b0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 > > fb0: init mode:24, bios mode:3, current mode:24 > > fb0: window:0xc00b8000 size:32k gran:32k, buf:0x0 size:0k > > VGA parameters upon power-up > > 50 18 10 00 00 00 03 00 02 67 60 4f 50 83 55 81 > > bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 > > b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c > > 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff > > VGA parameters in BIOS for mode 24 > > 50 18 10 00 10 00 03 00 02 67 60 4f 50 83 55 81 > > bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 > > b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c > > 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff > > EGA/VGA parameters to be used for mode 24 > > 50 18 10 00 10 00 03 00 02 67 60 4f 50 83 55 81 > > bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 > > b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c > > 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff > > npx0 on motherboard > > npx0: INT 16 interface > > imasks: bio c0084040, tty c007009a, net c007009a > > BIOS Geometries: > > 0:02097f3f 0..521=522 cylinders, 0..127=128 heads, 1..63=63 sectors > > 0 accounted for > > Device configuration finished. > > IP packet filtering initialized, divert enabled, rule-based forwarding > > enabled, default to accept, logging limited to 100 packets/entry by default > > > new masks: bio c0084040, tty c007009a, net c007009a > > DUMMYNET initialized (990504) > > IP Filter: initialized. Default = pass all, Logging = enabled > > Considering FFS root f/s. > > changing root device to wd0s1a > > wd0s1: type 0xa5, start 0, end = 4224149, size 4224150 > > wd0s1: C/H/S end 262/239/63 (3976559) != end 4224149: invalid > > start_init: trying /sbin/init > > Linux-ELF exec handler installed > > ---------------dmesg ends---------------- > > ---------------EXCISE configuration begins---------------- > > # > > # GENERIC -- Generic machine with WD/AHx/NCR/BTx family disks > > # > > # For more information on this file, please read the handbook section on > > # Kernel Configuration Files: > > # > > # http://www.freebsd.org/handbook/kernelconfig-config.html > > # > > # The handbook is also available locally in /usr/share/doc/handbook > > # if you've installed the doc distribution, otherwise always see the > > # FreeBSD World Wide Web server (http://www.FreeBSD.ORG/) for the > > # latest information. > > # > > # An exhaustive list of options and more detailed explanations of the > > # device lines is also present in the ./LINT configuration file. If you > > are > > > # in doubt as to the purpose or necessity of a line, check first in LINT. > > # > > # $FreeBSD: src/sys/i386/conf/GENERIC,v 1.143.2.24 1999/12/05 01:56:42 > > luoqi Exp $ > > > machine "i386" > > # cpu "I386_CPU" > > # cpu "I486_CPU" > > cpu "I586_CPU" > > cpu "I686_CPU" > > ident EXCISE > > maxusers 32 > > > > # some cpu enhancement options > > options "CPU_BLUELIGHTNING_FPU_OP_CACHE" > > options "CPU_BLUELIGHTNING_3X" > > options "CPU_FASTER_5X86_FPU" > > options "NO_F00F_HACK" > > > > # options MATH_EMULATE #Support for x87 emulation > > options USER_LDT #Allow program to manipulate LDT > > options "MD5" #build encryp routine in > > options "VM86" #allow vm86 mode > > options FFS #Berkeley Fast Filesystem > > options FFS_ROOT #FFS usable as root device [keep this!] > > options PROCFS #Process filesystem > > options SUIDDIR #for samba > > options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!] > > options UCONSOLE #Allow users to grab the console > > options FAILSAFE #Be conservative > > options USERCONFIG #boot -c editor > > options VISUAL_USERCONFIG #visual boot -c editor > > options KTRACE #ktrace(1) syscall trace support > > options SYSVSHM #SYSV-style shared memory > > options SYSVMSG #SYSV-style message queues > > options SYSVSEM #SYSV-style semaphores > > > > config kernel root on wd0 > > > > device isa0 > > # controller pnp0 # PnP support for ISA > > device pci0 > > > > # Floppy drives > > controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 > > disk fd0 at fdc0 drive 0 > > > > # IDE controller and disks > > options "CMD640" # work around CMD640 chip deficiency > > controller wdc0 at isa? port "IO_WD1" bio irq 14 flags 0xb0ff > > disk wd0 at wdc0 drive 0 > > > > controller wdc1 at isa? port "IO_WD2" bio irq 15 > > disk wd2 at wdc1 drive 0 > > > > # ATAPI devices > > options ATAPI #Enable ATAPI support for IDE bus > > options ATAPI_STATIC #Don't do it as an LKM > > device acd0 #IDE CD-ROM > > > > # atkbdc0 controls both the keyboard and the PS/2 mouse > > controller atkbdc0 at isa? port IO_KBD tty > > device atkbd0 at isa? tty irq 1 > > > > device vga0 at isa? port ? conflicts > > > > # splash screen/screen saver > > pseudo-device splash > > > > # syscons is the default console driver, resembling an SCO console > > device sc0 at isa? tty > > > > # Floating point support - do not disable. > > device npx0 at isa? port IO_NPX irq 13 > > > > # Serial (COM) ports > > device sio0 at isa? port "IO_COM1" flags 0x10 tty irq 4 > > device sio1 at isa? port "IO_COM2" tty irq 3 > > > > # Parallel port > > device ppc0 at isa? port? flags 0x40 net irq 7 > > controller ppbus0 # Parallel port bus (required) > > device lpt0 at ppbus? # Printer > > > > options INET #InterNETworking > > options IPFIREWALL #firewalls with ipfw > > options IPFIREWALL_FORWARD #enable proxy support > > options IPFIREWALL_VERBOSE #info on dropped packets > > options "IPFIREWALL_VERBOSE_LIMIT=100" #limit verbosity > > options IPFIREWALL_DEFAULT_TO_ACCEPT #avoid getting locked out... > > options IPDIVERT #enable divert IP sockets > > options IPFILTER #enable ipfilter package > > options IPFILTER_LOG #enable logging for ipfilter > > # options IPFILTER_LKM #enable LKM support for ipfilter > > options ICMP_BANDLIM #limit response to ICMP error > > options DUMMYNET #see man page dummynet(4) > > > > device ed0 # bog standard, but pci not isa > > > > # ISA Ethernet NICs. > > # Order is important here due to intrusive probes, do *not* alphabetize > > # this list of network interfaces until the probes have been fixed. > > # Right now it appears that the ie0 must be probed before ep0. See > > # revision 1.20 of this file. > > # device ed0 at isa? port 0x280 net irq 9 iomem 0xd8000 > > > > # Pseudo devices - the number indicates how many units to allocated. > > pseudo-device loop # Network loopback > > pseudo-device ether # Ethernet support > > pseudo-device sl 1 # Kernel SLIP > > pseudo-device ppp 2 # Kernel PPP > > pseudo-device tun 2 # Packet tunnel > > pseudo-device pty 16 # Pseudo-ttys (telnet etc) > > pseudo-device gzip # Exec gzipped a.out's > > > > pseudo-device speaker # play simple noises through speaker > > ---------------EXCISE configuration ends---------------- > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?01042315555100.00269>