Date: Mon, 4 Sep 2017 13:49:20 -0400 From: Mark Saad <nonesuch@longcount.org> To: Priyadarshana Chandrasena <vpc@ulka.com.au> Cc: Maciej Suszko <maciej@suszko.eu>, FreeBSD-stable@FreeBSD.org Subject: Re: HP Smart array P440 support Message-ID: <2FE93DAE-5EB3-460D-9E2E-296A8E7B47DC@longcount.org> In-Reply-To: <001c01d3251a$92d20090$b87601b0$@ulka.com.au> References: <001501d323f2$3e517560$baf46020$@ulka.com.au> <20170903211908.510b5724@leo> <001c01d3251a$92d20090$b87601b0$@ulka.com.au>
next in thread | previous in thread | raw e-mail | index | archive | help
Hello Have you tried to update the servers firmware using the hp spp or update t= ool . In the past with 9.3 and 10.0 I had boot issues until I updated the se= rvers firmware. I only have a ml10 with a p410 so I can't test much ; my jo= b also moved to dell about 2 years ago .=20 --- Mark Saad | nonesuch@longcount.org Sep 3, 2017, at 9:10 PM, Priyadarshana Chandrasena <vpc@ulka.com.au> wrote= : >=20 > I tried to install 11.1 but I still have the same error. UEFI boot mode do= es > not see my usb bootable media as of type UEFI. So still the Legacy BIOS is= > the only option. Do I need to create the usb UEFI when I create the usb bo= ot > disk?.=20 >=20 > -----Original Message----- > From: Maciej Suszko [mailto:maciej@suszko.eu]=20 > Sent: Monday, 4 September 2017 4:49 AM > To: Priyadarshana Chandrasena > Cc: FreeBSD-stable@FreeBSD.org > Subject: Re: HP Smart array P440 support >=20 > "Priyadarshana Chandrasena" <vpc@ulka.com.au> wrote: >> I have HP DL20 Gen 9 server. But I can not install FreeBSD 10.2 in it.=20= >> I have a HP smart array P440 in my server. I can not find out anywhere=20= >> if ciss driver support include HP Gen 9 storage controllers. Could=20 >> you please update the ciss driver in 10.3? >=20 > Hi, >=20 > Got two DL20 with P440, UEFI booted 11.0 to logical disk (raid array). > In a few days I plan to boot it in HBA mode, we'll see if it's working. >=20 > A few messages: > #v+ > root@storage-04:~ # uname -a > FreeBSD storage-04.gr 11.0-RELEASE-p8 FreeBSD 11.0-RELEASE-p8 #0: Wed Feb 2= 2 > 06:12:04 UTC 2017 > root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd64 >=20 > root@storage-04:~ # grep ciss /var/run/dmesg.boot > ciss0: <HP Smart Array P440> port 0x2000-0x20ff mem > 0x92c00000-0x92cfffff,0x92d00000-0x92d003ff at device 0.0 numa-domain 0 on= > pci2 > ciss0: PERFORMANT Transport > da2 at ciss0 bus 0 scbus2 target 0 lun 0 >=20 > root@storage-04:~ # camcontrol inquiry da2 > pass2: <HP RAID 1(1+0) OK> Fixed Direct Access SPC-3 SCSI device > pass2: Serial Number PDNMF0ARH401MI > pass2: 135.168MB/s transfers, Command Queueing Enabled > #v- > -- > regards, Maciej Suszko. >=20 > _______________________________________________ > freebsd-stable@freebsd.org mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-stable > To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?2FE93DAE-5EB3-460D-9E2E-296A8E7B47DC>