Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 1 Jun 1999 10:11:09 -0600 (MDT)
From:      "James R. Shrenk" <dionysos3@crosswinds.net>
To:        Tenacious <tMind@bigfoot.com>
Cc:        Doug White <dwhite@resnet.uoregon.edu>, Christian Helms <chris@helmsnet.de>, freebsd-questions@FreeBSD.ORG
Subject:   Re: Memory hole ?????
Message-ID:  <Pine.BSF.4.05.9906011005470.43461-100000@neptune.twrol.com>
In-Reply-To: <00d401beac36$c6cd3020$3c29a8c0@tci.rdo>

next in thread | previous in thread | raw e-mail | index | archive | help
I have to agree.  Change the RAM (to one 64 MB module if you can).  Sadly,
memory that comes from two different manufacturers is not always
compatible.  I've had similar experience particularly with newer memory
chips labeled PC100 that actually weren't, and I've also had worse
problems with smaller memory chips in some 486 boxes that I have.

On Tue, 1 Jun 1999, Tenacious wrote:

> Yes, I have the same experience.  Change all your ram and start over.
> 
> 
> 
> ----- Original Message -----
> From: Doug White <dwhite@resnet.uoregon.edu>
> To: Christian Helms <chris@helmsnet.de>
> Cc: <freebsd-questions@freebsd.org>
> Sent: Tuesday, June 01, 1999 1:58 AM
> Subject: Re: Memory hole ?????
> 
> 
> > On Mon, 31 May 1999, Christian Helms wrote:
> >
> > > Hello ,
> > > can anyone help me ? strange things happen when I try to
> > > install freeBSD 3.1 on my system (P100, FIC Board with 64MB RAM, Award
> > > BIOS from '95).
> > > After putting the 2nd install disk in, the computer hangs. when I
> > > reduce my memory to 32 MB, everything goes fine. I also checked the
> > > other 32 MB and there weren't any problems. As I want to use my full
> > > 64 MB RAM, I tried to find any BIOS settings for the memory. So, when I
> > > enable the 'Memory Hole At 15MB Addr.', I can install and boot BSD
> > > without problems. Could anyone please explain me what this setting
> > > means ? And is there another way to get rid of the problem because with
> this
> > > setting I cannot boot my other operating systems ?
> >
> > How much memory does FreeBSD see if you turn this on?
> >
> > Perhaps the other SIMM is bad?
> >
> > Doug White
> > Internet:  dwhite@resnet.uoregon.edu    | FreeBSD: The Power to Serve
> > http://gladstone.uoregon.edu/~dwhite    | www.freebsd.org
> >
> >
> >
> > To Unsubscribe: send mail to majordomo@FreeBSD.org
> > with "unsubscribe freebsd-questions" in the body of the message
> 
> 
> 
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-questions" in the body of the message
> 
> 



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.05.9906011005470.43461-100000>