Date: Fri, 15 Oct 2004 22:37:56 GMT From: nbco <nbco@screaming.net> To: freebsd-gnats-submit@FreeBSD.org Subject: kern/72748: em0 problems on t41 after updating to 5.3 Message-ID: <200410152237.i9FMbuPs001989@www.freebsd.org> Resent-Message-ID: <200410152240.i9FMeVFK067252@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 72748 >Category: kern >Synopsis: em0 problems on t41 after updating to 5.3 >Confidential: no >Severity: critical >Priority: high >Responsible: freebsd-bugs >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Fri Oct 15 22:40:30 GMT 2004 >Closed-Date: >Last-Modified: >Originator: nbco >Release: em0 problems on t41 after updating to 5.3 >Organization: >Environment: FreeBSD Quinch 5.3-BETA7 FreeBSD 5.3-BETA7 #0: Sun Oct 10 05:01:50 BST 2004root@Quinch:/usr/obj/usr/src/sys/BMS_EMPIRIC i386 >Description: I have the following problems after updating from 5.1.2.1 to 5.3-BETA7 I have extemely poor and intermittent network connectivity with my ethernet card (em0). My wireless atheros card (ath0) works perfectly. I have kde installed. With em0: I can ping; I can't telnet; sometimes I can send and receive mail (I mean very intermittently I can send a test message in about 12-24 hours). In terms of net access, I can access the web but extremely slowly with frequent timeouts, freebsd utilities are subject to the same issues, such as portupgrade; links; and cvsup, so I don't tend to think this is a kde problem. I have no DHCP entries in my rc.conf. Interestingly with both em0 and eth0, when executing dhclient I receive the following error message: dhclient: send_packet: Network is unreachable. However, with ath0 this is clearly a lie, as the network works perfectly. I have tested the ethernet card (em0) in my dual boot windows install, it works fine, so it doesn't seem to be a hardware problem. My other box on the network is also fine. %sudo sysctl hw.em0.debug_info=1 hw.em0.debug_info: -1 -> -1 % %sudo sysctl hw.em0.stats=1 hw.em0.stats: -1 -> -1 % %netstat -I em0 -in Name Mtu Network Address Ipkts Ierrs Opkts Oerrs Coll em0 1500 <Link#1> 00:0d:60:7e:57:16 24 0 133 0 0 em0 1500 fe80:1::20d:6 fe80:1::20d:60ff: 0 - 4 - - em0 1500 192.168.2 192.168.2.3 11 - 124 - - %pciconf -lv agp0@pci0:0:0: class=0x060000 card=0x05291014 chip=0x33408086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' device = '82855PM Odem Host-Hub Interface Bridge' class = bridge subclass = HOST-PCI pcib1@pci0:1:0: class=0x060400 card=0x00000000 chip=0x33418086 rev=0x03 hdr=0x01 vendor = 'Intel Corporation' device = '82855PM Odem AGP Bridge' class = bridge subclass = PCI-PCI uhci0@pci0:29:0: class=0x0c0300 card=0x052d1014 chip=0x24c28086 rev=0x01hdr=0x00 vendor = 'Intel Corporation' device = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1' class = serial bus subclass = USB uhci1@pci0:29:1: class=0x0c0300 card=0x052d1014 chip=0x24c48086 rev=0x01hdr=0x00 vendor = 'Intel Corporation' device = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2' class = serial bus subclass = USB uhci2@pci0:29:2: class=0x0c0300 card=0x052d1014 chip=0x24c78086 rev=0x01hdr=0x00 vendor = 'Intel Corporation' device = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3' class = serial bus subclass = USB ehci0@pci0:29:7: class=0x0c0320 card=0x052e1014 chip=0x24cd8086 rev=0x01hdr=0x00 vendor = 'Intel Corporation' device = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB EHCI Controller' class = serial bus subclass = USB pcib2@pci0:30:0: class=0x060400 card=0x00000000 chip=0x24488086 rev=0x81hdr=0x01 vendor = 'Intel Corporation' device = '82801BAM/CAM/DBM (ICH2-M/3-M/4-M) Hub Interface to PCI Bridge' class = bridge subclass = PCI-PCI isab0@pci0:31:0: class=0x060100 card=0x00000000 chip=0x24cc8086 rev=0x01hdr=0x00 vendor = 'Intel Corporation' device = '82801DBM (ICH4-M) LPC Interface Bridge' class = bridge subclass = PCI-ISA atapci0@pci0:31:1: class=0x01018a card=0x052d1014 chip=0x24ca8086 rev=0x01hdr=0x00 vendor = 'Intel Corporation' device = '82801DBM (ICH4-M) UltraATA/100 EIDE Controller' class = mass storage subclass = ATA none0@pci0:31:3: class=0x0c0500 card=0x052d1014 chip=0x24c38086 rev=0x01hdr=0x00 vendor = 'Intel Corporation' device = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller' class = serial bus subclass = SMBus pcm0@pci0:31:5: class=0x040100 card=0x05371014 chip=0x24c58086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' device = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller' class = multimedia subclass = audio none1@pci0:31:6: class=0x070300 card=0x05251014 chip=0x24c68086 rev=0x01hdr=0x00 vendor = 'Intel Corporation' device = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller' class = simple comms drm0@pci1:0:0: class=0x030000 card=0x05301014 chip=0x4c571002 rev=0x00 hdr=0x00 vendor = 'ATI Technologies Inc.' device = 'fdds Radeon Mobility M7 LW' class = display subclass = VGA cbb0@pci2:0:0: class=0x060700 card=0x05521014 chip=0xac46104c rev=0x01 hdr=0x02 vendor = 'Texas Instruments (TI)' device = 'PCI4520 PC card CardBus Controller' class = bridge subclass = PCI-CardBus cbb1@pci2:0:1: class=0x060700 card=0x05521014 chip=0xac46104c rev=0x01 hdr=0x02 vendor = 'Texas Instruments (TI)' device = 'PCI4520 PC card CardBus Controller' class = bridge subclass = PCI-CardBus em0@pci2:1:0: class=0x020000 card=0x05491014 chip=0x101e8086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' device = '82540EP Gigabit Ethernet Controller (Mobile)' class = network subclass = ethernet ath0@pci2:2:0: class=0x020000 card=0x833117ab chip=0x1014168c rev=0x01 hdr=0x00 vendor = 'Atheros Communications Inc.' class = network subclass = ethernet % %vmstat -i interrupt total rate irq0: clk 80009 99 irq1: atkbd0 602 0 irq8: rtc 102414 127 irq9: acpi0 1658 2 irq11: cbb0 cbb1++* 24283 30 irq12: psm0 31575 39 irq13: npx0 1 0 irq14: ata0 8949 11 irq15: ata1 86 0 Total 249577 311 % dmesg as follows: %dmesg ACPI timer looks GOOD min = 3, max = 3, width = 0 ACPI timer looks GOOD min = 3, max = 3, width = 0 ACPI timer looks GOOD min = 3, max = 3, width = 0 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 unknown: not probed (disabled) cpu0: <ACPI CPU (3 Cx states)> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 ACPI PCI link initial configuration: \\_SB_.LNKA irq 0: [ 3 4 5 6 7 9 10 11] 11+ low,level,sharable 0.29.0 \\_SB_.LNKD irq 0: [ 3 4 5 6 7 9 10 11] 11+ low,level,sharable 0.29.1 \\_SB_.LNKC irq 0: [ 3 4 5 6 7 9 10 11] 11+ low,level,sharable 0.29.2 \\_SB_.LNKH irq 0: [ 3 4 5 6 7 9 10 11] 11+ low,level,sharable 0.29.3 \\_SB_.LNKC irq 0: [ 3 4 5 6 7 9 10 11] 11+ low,level,sharable 0.31.0 \\_SB_.LNKB irq 0: [ 3 4 5 6 7 9 10 11] 11+ low,level,sharable 0.31.1 pci0: <ACPI PCI bus> on pcib0 pci0: physical bus=0 map[10]: type 3, range 32, base d0000000, size 28, enabled found-> vendor=0x8086, dev=0x3340, revid=0x03 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x3341, revid=0x03 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x00a0, cachelnsz=0 (dwords) lattimer=0x60 (2880 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 00001800, size 5, enabled pcib0: matched entry for 0.29.INTA (src \\_SB_.LNKA) pcib0: possible interrupts: 3 4 5 6 7 9 10 11 ACPI PCI link arbitrated settings: \\_SB_.LNKC (references 2, priority 5147): interrupts: 11 10 5 9 7 6 4 3 penalty: 60 60 110 120 5060 5060 5060 5060 \\_SB_.LNKA (references 1, priority 2573): interrupts: 11 10 5 9 7 6 4 3 penalty: 60 60 110 120 5060 5060 5060 5060 \\_SB_.LNKD (references 1, priority 2573): interrupts: 11 10 5 9 7 6 4 3 penalty: 60 60 110 120 5060 5060 5060 5060 \\_SB_.LNKH (references 1, priority 2573): interrupts: 11 10 5 9 7 6 4 3 penalty: 60 60 110 120 5060 5060 5060 5060 \\_SB_.LNKB (references 1, priority 2573): interrupts: 11 10 5 9 7 6 4 3 penalty: 60 60 110 120 5060 5060 5060 5060 pcib0: slot 29 INTA routed to irq 11 via \\_SB_.LNKA found-> vendor=0x8086, dev=0x24c2, revid=0x01 bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 map[20]: type 4, range 32, base 00001820, size 5, enabled pcib0: matched entry for 0.29.INTB (src \\_SB_.LNKD) pcib0: possible interrupts: 3 4 5 6 7 9 10 11 ACPI PCI link arbitrated settings: \\_SB_.LNKC (references 2, priority 5285): interrupts: 10 11 5 9 7 6 4 3 penalty: 120 130 170 240 5120 5120 5120 5120 \\_SB_.LNKD (references 1, priority 2642): interrupts: 10 11 5 9 7 6 4 3 penalty: 120 130 170 240 5120 5120 5120 5120 \\_SB_.LNKH (references 1, priority 2642): interrupts: 10 11 5 9 7 6 4 3 penalty: 120 130 170 240 5120 5120 5120 5120 \\_SB_.LNKB (references 1, priority 2642): interrupts: 10 11 5 9 7 6 4 3 penalty: 120 130 170 240 5120 5120 5120 5120 pcib0: slot 29 INTB routed to irq 11 via \\_SB_.LNKD found-> vendor=0x8086, dev=0x24c4, revid=0x01 bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 map[20]: type 4, range 32, base 00001840, size 5, enabled pcib0: matched entry for 0.29.INTC (src \\_SB_.LNKC) pcib0: possible interrupts: 3 4 5 6 7 9 10 11 ACPI PCI link arbitrated settings: \\_SB_.LNKC (references 2, priority 5422): interrupts: 10 11 5 9 7 6 4 3 penalty: 180 200 230 360 5180 5180 5180 5180 \\_SB_.LNKH (references 1, priority 2711): interrupts: 10 11 5 9 7 6 4 3 penalty: 180 200 230 360 5180 5180 5180 5180 \\_SB_.LNKB (references 1, priority 2711): interrupts: 10 11 5 9 7 6 4 3 penalty: 180 200 230 360 5180 5180 5180 5180 pcib0: slot 29 INTC routed to irq 11 via \\_SB_.LNKC found-> vendor=0x8086, dev=0x24c7, revid=0x01 bus=0, slot=29, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=11 map[10]: type 1, range 32, base c0000000, size 10, enabled pcib0: matched entry for 0.29.INTD (src \\_SB_.LNKH) pcib0: possible interrupts: 3 4 5 6 7 9 10 11 ACPI PCI link arbitrated settings: \\_SB_.LNKH (references 1, priority 2781): interrupts: 10 11 5 9 7 6 4 3 penalty: 240 280 290 480 5240 5240 5240 5240 \\_SB_.LNKB (references 1, priority 2781): interrupts: 10 11 5 9 7 6 4 3 penalty: 240 280 290 480 5240 5240 5240 5240 pcib0: slot 29 INTD routed to irq 11 via \\_SB_.LNKH found-> vendor=0x8086, dev=0x24cd, revid=0x01 bus=0, slot=29, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=11 powerspec 2 supports D0 D3 current D0 found-> vendor=0x8086, dev=0x2448, revid=0x81 bus=0, slot=30, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x8080, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x24cc, revid=0x01 bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 00001860, size 4, enabled found-> vendor=0x8086, dev=0x24ca, revid=0x01 bus=0, slot=31, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 map[20]: type 4, range 32, base 00001880, size 5, enabled pcib0: matched entry for 0.31.INTB (src \\_SB_.LNKB) pcib0: possible interrupts: 3 4 5 6 7 9 10 11 ACPI PCI link arbitrated settings: \\_SB_.LNKB (references 1, priority 2850): interrupts: 10 11 5 9 7 6 4 3 penalty: 300 350 350 600 5300 5300 5300 5300 pcib0: slot 31 INTB routed to irq 11 via \\_SB_.LNKB found-> vendor=0x8086, dev=0x24c3, revid=0x01 bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 map[10]: type 4, range 32, base 00001c00, size 8, enabled map[14]: type 4, range 32, base 000018c0, size 6, enabled map[18]: type 1, range 32, base c0000c00, size 9, enabled map[1c]: type 1, range 32, base c0000800, size 8, enabled pcib0: matched entry for 0.31.INTB (src \\_SB_.LNKB) pcib0: slot 31 INTB is already routed to irq 11 found-> vendor=0x8086, dev=0x24c5, revid=0x01 bus=0, slot=31, func=5 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type 4, range 32, base 00002400, size 8, enabled map[14]: type 4, range 32, base 00002000, size 7, enabled pcib0: matched entry for 0.31.INTB (src \\_SB_.LNKB) pcib0: slot 31 INTB is already routed to irq 11 found-> vendor=0x8086, dev=0x24c6, revid=0x01 bus=0, slot=31, func=6 class=07-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 powerspec 2 supports D0 D3 current D0 agp0: <Intel 82855 host to AGP bridge> mem 0xd0000000-0xdfffffff at device 0.0 on pci0 agp0: Reserved 0x10000000 bytes for rid 0x10 type 3 at 0xd0000000 agp0: allocating GATT for aperture of size 256M pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0x3000-0x3fff pcib1: memory decode 0xc0100000-0xc01fffff pcib1: prefetched decode 0xe0000000-0xe7ffffff ACPI PCI link initial configuration: \\_SB_.LNKA irq*11: [ 3 4 5 6 7 9 10 11] 11+ low,level,sharable 1.0.0 \\_SB_.LNKB irq*11: [ 3 4 5 6 7 9 10 11] 11+ low,level,sharable 1.0.1 pci1: <ACPI PCI bus> on pcib1 pci1: physical bus=1 map[10]: type 3, range 32, base e0000000, size 27, enabled pcib1: device (null) requested decoded memory range 0xe0000000-0xe7ffffff map[14]: type 4, range 32, base 00003000, size 8, enabled pcib1: device (null) requested decoded I/O range 0x3000-0x30ff map[18]: type 1, range 32, base c0100000, size 16, enabled pcib1: device (null) requested decoded memory range 0xc0100000-0xc010ffff pcib1: matched entry for 1.0.INTA (src \\_SB_.LNKA) pcib1: slot 0 INTA is already routed to irq 11 found-> vendor=0x1002, dev=0x4c57, revid=0x00 bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0387, statreg=0x02b0, cachelnsz=8 (dwords) lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 drm0: <ATI Radeon LW Mobility 7500 M7> port 0x3000-0x30ff mem 0xc0100000-0xc010ffff,0xe0000000-0xe7ffffff irq 11 at device 0.0 on pci1 info: [drm] AGP at 0xd0000000 256MB info: [drm] Initialized radeon 1.11.0 20020828 on minor 0 uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0x1800-0x181f irq 11 atdevice 29.0 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1800 uhci0: [GIANT-LOCKED] usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0x1820-0x183f irq 11 atdevice 29.1 on pci0 uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1820 uhci1: [GIANT-LOCKED] usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0x1840-0x185f irq 11 atdevice 29.2 on pci0 uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1840 uhci2: [GIANT-LOCKED] usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> mem 0xc0000000-0xc00003ff irq 11 at device 29.7 on pci0 ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xc0000000 ehci0: [GIANT-LOCKED] ehci_pci_attach: companion usb0 ehci_pci_attach: companion usb1 ehci_pci_attach: companion usb2 usb3: EHCI version 1.0 usb3: companion controllers, 2 ports each: usb0 usb1 usb2 usb3: <EHCI (generic) USB 2.0 controller> on ehci0 usb3: USB revision 2.0 uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub3: 6 ports with 6 removable, self powered pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pcib2: secondary bus 2 pcib2: subordinate bus 8 pcib2: I/O decode 0x4000-0x8fff pcib2: memory decode 0xc0200000-0xcfffffff pcib2: prefetched decode 0xe8000000-0xefffffff pcib2: Subtractively decoded bridge. ACPI PCI link initial configuration: \\_SB_.LNKA irq*11: [ 3 4 5 6 7 9 10 11] 11+ low,level,sharable 2.0.0 \\_SB_.LNKB irq*11: [ 3 4 5 6 7 9 10 11] 11+ low,level,sharable 2.0.1 \\_SB_.LNKC irq*11: [ 3 4 5 6 7 9 10 11] 11+ low,level,sharable 2.0.2 \\_SB_.LNKA irq*11: [ 3 4 5 6 7 9 10 11] 11+ low,level,sharable 2.1.0 \\_SB_.LNKC irq*11: [ 3 4 5 6 7 9 10 11] 11+ low,level,sharable 2.2.0 \\_SB_.LNKD irq*11: [ 3 4 5 6 7 9 10 11] 11+ low,level,sharable 2.2.1 \\_SB_.LNKA irq*11: [ 3 4 5 6 7 9 10 11] 11+ low,level,sharable 2.2.2 \\_SB_.LNKB irq*11: [ 3 4 5 6 7 9 10 11] 11+ low,level,sharable 2.2.3 \\_SB_.LNKC irq*11: [ 3 4 5 6 7 9 10 11] 11+ low,level,sharable 2.4.0 \\_SB_.LNKD irq*11: [ 3 4 5 6 7 9 10 11] 11+ low,level,sharable 2.4.1 \\_SB_.LNKA irq*11: [ 3 4 5 6 7 9 10 11] 11+ low,level,sharable 2.4.2 \\_SB_.LNKB irq*11: [ 3 4 5 6 7 9 10 11] 11+ low,level,sharable 2.4.3 \\_SB_.LNKE irq 0: [ 3 4 5 6 7 9 10 11] 0+ low,level,sharable 2.8.0 pci2: <ACPI PCI bus> on pcib2 pci2: physical bus=2 map[10]: type 1, range 32, base b0000000, size 12, enabled pcib2: device (null) requested decoded memory range 0xb0000000-0xb0000fff pcib2: matched entry for 2.0.INTA (src \\_SB_.LNKA) pcib2: slot 0 INTA is already routed to irq 11 found-> vendor=0x104c, dev=0xac46, revid=0x01 bus=2, slot=0, func=0 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0107, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0xc0 (48000 ns), maxlat=0x03 (750 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base b1000000, size 12, enabled pcib2: device (null) requested decoded memory range 0xb1000000-0xb1000fff pcib2: matched entry for 2.0.INTB (src \\_SB_.LNKB) pcib2: slot 0 INTB is already routed to irq 11 found-> vendor=0x104c, dev=0xac46, revid=0x01 bus=2, slot=0, func=1 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0107, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0xc0 (48000 ns), maxlat=0x03 (750 ns) intpin=b, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base c0220000, size 17, enabled pcib2: device (null) requested decoded memory range 0xc0220000-0xc023ffff map[14]: type 1, range 32, base c0200000, size 16, enabled pcib2: device (null) requested decoded memory range 0xc0200000-0xc020ffff map[18]: type 4, range 32, base 00008000, size 6, enabled pcib2: device (null) requested decoded I/O range 0x8000-0x803f pcib2: matched entry for 2.1.INTA (src \\_SB_.LNKA) pcib2: slot 1 INTA is already routed to irq 11 found-> vendor=0x8086, dev=0x101e, revid=0x03 bus=2, slot=1, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0117, statreg=0x0230, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type 1, range 32, base c0210000, size 16, enabled pcib2: device (null) requested decoded memory range 0xc0210000-0xc021ffff pcib2: matched entry for 2.2.INTA (src \\_SB_.LNKC) pcib2: slot 2 INTA is already routed to irq 11 found-> vendor=0x168c, dev=0x1014, revid=0x01 bus=2, slot=2, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0116, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x50 (2400 ns), mingnt=0x0a (2500 ns), maxlat=0x1c (7000 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 cbb0: <PCI-CardBus Bridge> mem 0xb0000000-0xb0000fff irq 11 at device 0.0 on pci2 cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xb0000000 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb0: [MPSAFE] cbb0: PCI Configuration space: 0x00: 0xac46104c 0x02100107 0x06070001 0x00824008 0x10: 0xb0000000 0x020000a0 0xb0050302 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 0x30: 0x00000000 0xfffffffc 0x00000000 0x0740010b 0x40: 0x05521014 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x0840d071 0x040a0000 0x000f0000 0x01d21b22 0x90: 0x416402c0 0x00000000 0x00000000 0x00000000 0xa0: 0xfe120001 0x00c00000 0x00000000 0x00000000 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 cbb1: <PCI-CardBus Bridge> mem 0xb1000000-0xb1000fff irq 11 at device 0.1 on pci2 cbb1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xb1000000 cardbus1: <CardBus bus> on cbb1 pccard1: <16-bit PCCard bus> on cbb1 cbb1: [MPSAFE] cbb1: PCI Configuration space: 0x00: 0xac46104c 0x02100107 0x06070001 0x00824008 0x10: 0xb1000000 0x020000a0 0xb0080602 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 0x30: 0x00000000 0xfffffffc 0x00000000 0x0740020b 0x40: 0x05521014 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x0840d071 0x040a0000 0x000f0000 0x01d21b22 0x90: 0x416402c0 0x00000000 0x00000000 0x00000000 0xa0: 0xfe120001 0x00c00000 0x00000000 0x00000000 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.25> port 0x8000-0x803f mem 0xc0200000-0xc020ffff,0xc0220000-0xc023ffff irq 11 at device 1.0 on pci2 em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xc0220000 em0: Reserved 0x40 bytes for rid 0x18 type 4 at 0x8000 em0: [MPSAFE] em0: bpf attached em0: Ethernet address: 00:0d:60:7e:57:16 em0: Speed:N/A Duplex:N/A ath0: <Atheros 5212> mem 0xc0210000-0xc021ffff irq 11 at device 2.0 on pci2 ath0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xc0210000 ath0: [MPSAFE] ath0: mac 5.6 phy 4.1 5ghz radio 1.7 2ghz radio 2.3 ath0: bpf attached ath0: Ethernet address: 00:05:4e:44:be:20 ath0: bpf attached ath0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps ath0: bpf attached isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH4 UDMA100 controller> port 0x1860-0x186f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1860 ata0: channel #0 on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ata0: [MPSAFE] ata1: channel #1 on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=03 ostat0=50 ostat1=00 ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb ata1-slave: stat=0x00 err=0x01 lsb=0x14 msb=0xeb ata1: reset tp2 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER> ata1: [MPSAFE] pci0: <serial bus, SMBus> at device 31.3 (no driver attached) pcm0: <Intel ICH4 (82801DB)> port 0x18c0-0x18ff,0x1c00-0x1cff mem 0xc0000800-0xc00008ff,0xc0000c00-0xc0000dff irq 11 at device 31.5 on pci0 pcm0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x1c00 pcm0: Reserved 0x40 bytes for rid 0x14 type 4 at 0x18c0 pcm0: [GIANT-LOCKED] pcm0: <Analog Devices AD1981B AC97 Codec (id = 0x41445374)> pcm0: Codec features headphone, 20 bit DAC, 5 bit master volume, no 3D Stereo Enhancement pcm0: Primary codec extended features variable rate PCM, AMAP, reserved 4 pcm0: sndbuf_setmap 3e8c5000, 4000; 0xf4f77000 -> 3e8c5000 pcm0: sndbuf_setmap 3e8c1000, 4000; 0xf4f7b000 -> 3e8c1000 pci0: <simple comms> at device 31.6 (no driver attached) unknown: not probed (disabled) atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x54ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 atkbd0: [GIANT-LOCKED] psm0: unable to allocate IRQ psmcpnp0 irq 12 on acpi0 psm0: current command byte:0047 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons psm0: config:00006000, flags:00000008, packet size:3 psm0: syncmask:c0, syncbits:00 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: irq maps: 0x201 0x201 0x201 0x201 sio0: probe failed test(s): 0 1 2 4 6 7 9 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 8250 or not responding ppc0: using extended I/O port range ppc0: SPP ppc0 port 0x3bc-0x3be irq 7 on acpi0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 unknown: not probed (disabled) sio1: irq maps: 0x201 0x209 0x201 0x201 sio1 port 0x2f8-0x2ff irq 3 drq 3 on acpi0 sio1: type 16550A unknown: not probed (disabled) acpi_cmbat0: <Control Method Battery> on acpi0 unknown: not probed (disabled) acpi_acad0: <AC Adapter> on acpi0 unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it ppc: ppc0 already exists; skipping it sc: sc0 already exists; skipping it sio: sio0 already exists; skipping it sio: sio1 already exists; skipping it vga: vga0 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xdc000-0xdffff,0xd1000-0xd1fff,0xd0000-0xd0fff on isa0 sc0: <System console> on isa0 sc0: VGA <16 virtual consoles, flags=0x200> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0 at vga0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k vga0: vga: WARNING: video mode switching is not fully supported on this adapter VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 e7 73 4f 4f 97 52 83 b4 1f 00 4f 0d 0e 00 00 07 80 91 87 8f 28 1f 8f b5 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 00 00 03 00 02 e7 73 4f 4f 97 52 83 b4 1f 00 4f 0d 0e 00 00 07 80 91 87 8f 28 1f 8f b5 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0 fe0: not probed (disabled) ie0: not probed (disabled) lnc0: not probed (disabled) pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic1: not probed (disabled) sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vt0: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. procfs registered Timecounter "TSC" frequency 1594832295 Hz quality 800 Timecounters tick every 10.000 msec IPv6 packet filtering initialized, default to accept, logging limited to 100 packets/entry crypto: <crypto device> crypto: assign driver 0, flags 6 crypto: driver 0 registers alg 1 flags 0 maxoplen 0 crypto: driver 0 registers alg 2 flags 0 maxoplen 0 crypto: driver 0 registers alg 3 flags 0 maxoplen 0 crypto: driver 0 registers alg 4 flags 0 maxoplen 0 crypto: driver 0 registers alg 5 flags 0 maxoplen 0 crypto: driver 0 registers alg 17 flags 0 maxoplen 0 crypto: driver 0 registers alg 6 flags 0 maxoplen 0 crypto: driver 0 registers alg 7 flags 0 maxoplen 0 crypto: driver 0 registers alg 15 flags 0 maxoplen 0 crypto: driver 0 registers alg 8 flags 0 maxoplen 0 crypto: driver 0 registers alg 16 flags 0 maxoplen 0 crypto: driver 0 registers alg 9 flags 0 maxoplen 0 crypto: driver 0 registers alg 10 flags 0 maxoplen 0 crypto: driver 0 registers alg 13 flags 0 maxoplen 0 crypto: driver 0 registers alg 14 flags 0 maxoplen 0 crypto: driver 0 registers alg 11 flags 0 maxoplen 0 crypto: driver 0 registers alg 18 flags 0 maxoplen 0 Fast IPsec: Initialized Security Association Processing. lo0: bpf attached ipfw2 initialized, divert enabled, rule-based forwarding disabled, default to accept, logging limited to 100 packets/entry by default cpu0: set speed to 100.0% acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0% acpi_cmbat0: battery initialization start acpi_ec0: info: new max delay is 230 us acpi_cmbat0: battery initialization done, tried 1 times acpi_acad0: acline initialization start acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin ata0-master: setting PIO4 on Intel ICH4 chip ata0-master: setting UDMA100 on Intel ICH4 chip ad0: <HTS548040M9AT00/MG2OA5BA> ATA-6 disk at ata0-master ad0: 34728MB (71123954 sectors), 70559 C, 16 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, UDMA100 (probe0:ata0:0:0:0): error 22 (probe0:ata0:0:0:0): Unretryable Error (probe1:ata0:0:1:0): error 22 (probe1:ata0:0:1:0): Unretryable Error GEOM: new disk ad0 [0] f:00 typ:7 s(CHS):0/1/1 e(CHS):892/59/63 s:63 l:14333697 [1] f:00 typ:15 s(CHS):1023/255/63 e(CHS):1023/89/63 s:34806240 l:36303120 [2] f:80 typ:165 s(CHS):892/60/1 e(CHS):1023/254/63 s:14333760 l:20463030 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad0s1, start 32256 length 7338852864 end 7338885119 GEOM: Configure ad0s2, start 17820794880 length 18587197440 end 36407992319 GEOM: Configure ad0s3, start 7338885120 length 10477071360 end 17815956479 MBREXT Slice 5 on ad0s2: [0] f:00 typ:11 s(CHS):1023/1/1 e(CHS):1023/239/63 s:63 l:36303057 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad0s5, start 32256 length 18587165184 end 18587197439 GEOM: Configure ad0s3a, start 0 length 268435456 end 268435455 GEOM: Configure ad0s3b, start 268435456 length 2119860224 end 2388295679 GEOM: Configure ad0s3c, start 0 length 10477071360 end 10477071359 GEOM: Configure ad0s3d, start 2388295680 length 268435456 end 2656731135 GEOM: Configure ad0s3e, start 2656731136 length 268435456 end 2925166591 GEOM: Configure ad0s3f, start 2925166592 length 7551904768 end 10477071359 ata1: reiniting channel .. ata1: reset tp1 mask=03 ostat0=00 ostat1=00 ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb ata1-slave: stat=0x00 err=0x01 lsb=0x14 msb=0xeb ata1: reset tp2 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER> ata1: resetting done .. ata1: reiniting channel .. ata1-slave: FAILURE - ATAPI_IDENTIFY timed out ata1: reiniting channel .. ata1-slave: FAILURE - ATAPI_IDENTIFY timed out ata1-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin ata1-master: setting PIO4 on Intel ICH4 chip ata1-master: setting UDMA33 on Intel ICH4 chip ata1: device config done .. ata1-slave: FAILURE - ATAPI_IDENTIFY timed out ata1-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin ata1-master: setting PIO4 on Intel ICH4 chip ata1-master: setting UDMA33 on Intel ICH4 chip acd0: <UJDA755zDVD/CDRW/1.20> CDRW drive at ata1 as master acd0: read 4134KB/s (4134KB/s) write 2755KB/s (4134KB/s), 2048KB buffer, UDMA33 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet acd0: Writes: CDR, CDRW, test write, burnproof acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc pcm0: measured ac97 link rate at 48014 Hz, will use 48000 Hz (probe1:ata1:0:1:0): error 22 (probe1:ata1:0:1:0): Unretryable Error (probe2:ata0:0:0:0): error 22 (probe2:ata0:0:0:0): Unretryable Error (probe3:ata0:0:1:0): error 22 (probe3:ata0:0:1:0): Unretryable Error (probe1:ata1:0:1:0): error 22 (probe1:ata1:0:1:0): Unretryable Error (probe0:ata1:0:0:0): error 22 (probe0:ata1:0:0:0): Unretryable Error (probe0:ata1:0:0:0): error 6 (probe0:ata1:0:0:0): Unretryable Error (probe0:ata1:0:0:0): error 22 (probe0:ata1:0:0:0): Unretryable Error pass0 at ata1 bus 0 target 0 lun 0 pass0: <MATSHITA UJDA755zDVD/CDRW 1.20> Removable CD-ROM SCSI-0 device pass0: 33.000MB/s transfers (cd0:ata1:0:0:0): error 6 (cd0:ata1:0:0:0): Unretryable Error cd0 at ata1 bus 0 target 0 lun 0 cd0: <MATSHITA UJDA755zDVD/CDRW 1.20> Removable CD-ROM SCSI-0 device cd0: 33.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed GEOM: new disk cd0 (cd0:ata1:0:0:0): error 6 (cd0:ata1:0:0:0): Unretryable Error (cd0:ata1:0:0:0): error 6 (cd0:ata1:0:0:0): Unretryable Error (cd0:ata1:0:0:0): error 6 (cd0:ata1:0:0:0): Unretryable Error Mounting root from ufs:/dev/ad0s3a start_init: trying /sbin/init Linux ELF exec handler installed linprocfs registered splash: image decoder found: blank_saver Intel(R) Pentium(R) M processor 1600MHz: Enhanced SpeedStep running at 1600 MHz(1484 mV) em0: Link is up 100 Mbps Full Duplex agp0: Setting AGP v2 mode 1 drm0: [MPSAFE] % >How-To-Repeat: attempt to connect to the net using em0 >Fix: >Release-Note: >Audit-Trail: >Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200410152237.i9FMbuPs001989>