Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 10 Apr 2016 15:00:13 +0300
From:      Aleksander Alekseev <afiskon@devzen.ru>
To:        freebsd-questions@freebsd.org
Subject:   Stupid question regarding ZFS and `df -h` output
Message-ID:  <20160410150013.4d34a49b@portege>

Next in thread | Raw E-Mail | Index | Archive | Help
Hello

I installed FreeBSD using steps like "Next -> Next -> ZFS -> use entire
disk and don't bother me with stupid questions -> Next"

I have 128 Gb hard drive:

ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <TOSHIBA THNSNS128GMCP TA4ABBF0> ATA8-ACS SATA 3.x device
ada0: Serial Number 82GS10GGT2GY
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 122104MB (250069680 512 byte sectors)

And here is `df -h` output:

Filesystem            Size    Used   Avail Capacity  Mounted on
zroot/ROOT/default     95G     21G     74G    22%    /
devfs                 1.0K    1.0K      0B   100%    /dev
zroot/tmp              75G    153M     74G     0%    /tmp
zroot/usr/home         89G     15G     74G    17%    /usr/home
zroot/usr/ports        75G    859M     74G     1%    /usr/ports
zroot/usr/src          76G    1.2G     74G     2%    /usr/src
zroot/var/audit        74G     96K     74G     0%    /var/audit
zroot/var/crash        75G    930M     74G     1%    /var/crash
zroot/var/log          74G    360K     74G     0%    /var/log
zroot/var/mail         74G    188K     74G     0%    /var/mail
zroot/var/tmp          74G    136K     74G     0%    /var/tmp
zroot                  74G     96K     74G     0%    /zroot

How exactly should I read this to get result "all 128 GB are used"?

-- 
Best regards,
Aleksander Alekseev
http://eax.me/



Want to link to this message? Use this URL: <http://docs.FreeBSD.org/cgi/mid.cgi?20160410150013.4d34a49b>