Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 26 Feb 2003 19:58:20 +0100
From:      Arne Steinkamm <arne@Steinkamm.COM>
To:        freebsd-sparc@freebsd.org
Cc:        arne@steinkamm.com
Subject:   Vinum / raidframe [and Re: Problem booting E250 / SCSI errors]
Message-ID:  <20030226185820.GC1411@steinkamm.com>
In-Reply-To: <20030224180601.GA21547@steinkamm.com>
References:  <20030224180601.GA21547@steinkamm.com>

next in thread | previous in thread | raw e-mail | index | archive | help
Hi friends,

ok my first problem is history... but I do not have an explanation.
After reinserting all the harddisks, everything worked as expected.
Nice, *but* this system was able to access all the harddisks during the
"we try NetBSD"- phase days ago and no one touched the hardware apart from
replacing the NetBSD cdrom with the FreeBSD one.

Ok,
can someone enlighten me with the current status of the raid support in
5.0/sparc?
I miss the vinum kernel module after cvsup and rebuild to the tag "dot".
Is raidframe usable with the sparc64 port -- according to the project
page troubles are expected with the new 5.0 SMP code.

Thanks for any help,

.//. Arne

On Mon, Feb 24, 2003 at 07:06:01PM +0100, Arne Steinkamm wrote:
> Hello,
> 
> I try to install 5.0-release on an E250.
> System is as empty as possible.
> 
> The system goes immediately in an endless loop telling me, that
> sym0:9: No MSG OUT phase after selection with ATN.
> (noperiph:sym0:0:-1:-1): SCSI BUS reset detected.
> 
> I tried to read and understand the code in the source but, I have to admit,
> the SCSI background is missing, so I'm not able to find a workaround here.
> 
> How can I "boot -c" the system -- to speak in x86 terms -- to try it without
> sym0?
> 
> Another question, related to the project I'm currently working on:
> Is FreeBSD/sparc64 ready now to be used as a production mailserver ?
> 
> I have this spare machine and the hardware fits the problem pretty well but
> I really do not want to support sendmail&friends on solaris.
> OpenBSD has no SMP support (currently only one CPU installed 'cause debugging)
> and NetBSD made me a little sad the last weeks...
> 
> Thanks in advance
> .//. Arne
> 
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>         The Regents of the University of California. All rights reserved.
> FreeBSD 5.0-RELEASE #0: Fri Jan 17 20:03:38 GMT 2003
>     root@numenor.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC
> Preloaded elf kernel "/boot/kernel/kernel" at 0xc0880000.
> Preloaded mfs_root "/boot/mfsroot" at 0xc08801a0.
> Timecounter "tick"  frequency 400000000 Hz
> cpu0: Sun Microsystems UltraSparc-II Processor (400.00 MHz CPU)
> Model: SUNW,Ultra-250
> Initializing GEOMetry subsystem
> md0: Preloaded image </boot/mfsroot> 4194304 bytes at 0xc047c958
> nexus0: <OpenFirmware Nexus device>
> nexus0: <associations>, type (unknown) (no driver attached)
> pcib0: <U2P UPA-PCI bridge> on nexus0
> pcib0: Psycho, impl 0, version 4, ign 7c0 initialializing counter-timer
> Timecounter "counter-timer"  frequency 1000000 Hz
> DVMA map: 0xfe000000 to 0xffffffff
> device 0/1/0: latency timer 10 -> 82
> pcib0: ofw_pci_init: no interrupt mapping found for 0/1/0 (preset 0)
> device 0/1/1: latency timer 10 -> 82
> pcib0: ofw_pci_init: mapping intr for 0/1/1 to 33 (preset was 0)
> device 0/3/0: latency timer 17 -> 140
> pcib0: ofw_pci_init: mapping intr for 0/3/0 to 32 (preset was 0)
> device 0/3/1: latency timer 17 -> 140
> pcib0: ofw_pci_init: mapping intr for 0/3/1 to 38 (preset was 0)
> pci0: <PCI bus> on pcib0
> ebus0: revision 0x01
> ebus0: <PCI-EBus2 bridge> mem 0x71000000-0x717fffff,0x70000000-0x70ffffff at device 1.0 on pci0
> ebus0: <auxio> addr 0x140072f000-0x140072f003,0x140072c000-0x140072c003,0x140072a000-0x140072a003,0x1400728000-0x1400728003,0x1400726000-0x1400726003 (no driver attached)
> ebus0: <power> addr 0x1400724000-0x1400724003 (no driver attached)
> ebus0: <SUNW,pll> addr 0x1400504000-0x1400504002 (no driver attached)
> ebus0: <sc> addr 0x1400500000-0x1400500007 (no driver attached)
> ebus0: <se> addr 0x1400400000-0x140040007f irq 43 (no driver attached)
> ebus0: <se> addr 0x1400200000-0x140020007f irq 35 (no driver attached)
> ebus0: <su> addr 0x14003083f8-0x14003083ff irq 41 (no driver attached)
> ebus0: <su> addr 0x14003062f8-0x14003062ff irq 33 (no driver attached)
> ebus0: <ecpp> addr 0x1400700000-0x140070000f,0x1400300398-0x1400300399,0x14003043bc-0x14003043cb irq 33 (no driver attached)
> eeprom0: <EBus EEPROM/clock> addr 0x1400000000-0x1400001fff on ebus0
> eeprom0: model mk48t59
> eeprom0: hostid 80e71b36
> ebus0: <flashprom> addr 0x1000000000-0x10000fffff,0x1000000000-0x10000fffff (no driver attached)
> ebus0: <SUNW,envctrltwo> addr 0x1400600000-0x1400600003 irq 37,40 (no driver attached)
> hme0: <Sun HME 10/100 Ethernet> mem 0x8000-0xffff irq 33 at device 1.1 on pci0
> hme0: Ethernet address: 08:00:20:e7:1b:36
> miibus0: <MII bus> on hme0
> nsphy0: <DP83840 10/100 media interface> on miibus0
> nsphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> sym0: <875> port 0x400-0x4ff mem 0x12000-0x12fff,0x10000-0x100ff irq 32 at device 3.0 on pci0
> sym0: No NVRAM, ID 7, Fast-20, SE, parity checking
> sym1: <875> port 0x800-0x8ff mem 0x16000-0x16fff,0x14000-0x140ff irq 38 at device 3.1 on pci0
> sym1: No NVRAM, ID 7, Fast-20, SE, parity checking
> pcib1: <U2P UPA-PCI bridge> on nexus0
> pcib1: Psycho, impl 0, version 4, ign 7c0 pci1: <PCI bus> on pcib1
> nexus0: <rsc>, type system-service-processor (no driver attached)
> nexus0: <mc>, type memory-controller (no driver attached)
> Timecounters tick every 10.000 msec
> Waiting 15 seconds for SCSI devices to settle
> sym0:9: No MSG OUT phase after selection with ATN.
> (noperiph:sym0:0:-1:-1): SCSI BUS reset detected.
> sym0:9: No MSG OUT phase after selection with ATN.
> (noperiph:sym0:0:-1:-1): SCSI BUS reset detected.
> sym0:9: No MSG OUT phase after selection with ATN.
> (noperiph:sym0:0:-1:-1): SCSI BUS reset detected.
> ... 
> 
> -- 
> Arne Steinkamm         | Mail (MIME): arne@steinkamm.com         IRC: Arne
> Tel.: +49.89.299.756   | URL: http://WWW.Steinkamm.COM/  NIC-Handle: AS306
> Laendstrasse 4         | PGP KeyID: AAB3844D              PGP fingerprint:
> 80538 Muenchen GERMANY | 7B EE D6 05 0E C8 33 DC   C1 2D 1D 49 8A 98 DF 26

-- 
Arne Steinkamm         | Mail (MIME): arne@steinkamm.com         IRC: Arne
Tel.: +49.89.299.756   | URL: http://WWW.Steinkamm.COM/  NIC-Handle: AS306
Laendstrasse 4         | PGP KeyID: AAB3844D              PGP fingerprint:
80538 Muenchen GERMANY | 7B EE D6 05 0E C8 33 DC   C1 2D 1D 49 8A 98 DF 26


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-sparc" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030226185820.GC1411>