Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 4 Nov 2011 09:23:13 +0000 (GMT)
From:      "Thomas Mueller" <mueller6727@bellsouth.net>
To:        freebsd-questions@FreeBSD.org
Cc:        Polytropon <freebsd@edvax.de>
Subject:   Re: Burning CDs or DVDs with SATA drive?
Message-ID:  <20111104092314.23CDC1065672@hub.freebsd.org>
References:  <20111103103218.58F8D106566C@hub.freebsd.org> <20111103121444.1e7253bf.freebsd@edvax.de>

next in thread | previous in thread | raw e-mail | index | archive | help
> > I built and installed sysutils/cdrtools when there was a
> > thread on burncd and SATA, but cdrecord can't see anything
> > (running "cdrecord -scanbus"):


> > cdrecord: Inappropriate ioctl for device. CAMIOCOMMAND ioctl failed. Cannot open or use SCSI driver.
> > cdrecord: For possible targets try 'cdrecord -scanbus'.
> > cdrecord: For possible transport specifiers try 'cdrecord dev=help'.
> > Cdrecord-ProDVD-ProBD-Clone 3.00 (amd64-unknown-freebsd9.0) Copyright (C) 1995-2010 J?rg Schilling


> > Running "cdrecord dev=help" or "cdrecord dev=HELP:" did no better.
   
> Do you have permissions set properly? Maybe it still
> tries to access per ATAPICAM, which may be non-working
> just like acd - just a wild guess, I'm not using 9-RC
> here so I can't be more specific.
 
         
         
> > I had a similar problem on the older computer (i386 with ATA,
> > not SATA) in NetBSD, but cdrecord ran well in Linux.  CD-RW
> > drive there is ATAPI.
         
> I've been using cdrecord and cdrdao now since burncd
> stopped working for me somewhere in v5. For DVDs,
> growisofs should work.
 
> While cdrecord and cdrdao address th "SCSI device"
> by n:n:n, growisofs uses /dev/cdN.
 
> --
> Polytropon

After I failed to burn a CD in NetBSD (5.1_STABLE) on the older computer (i386) with cdrecord, I booted into FreeBSD 8.2 RELEASE and was successful with burncd.  That drive was CD-RW, ATAPI, that computer has ATA but no SATA.

Does growisofs work on CDRs or only DVDs?

If 'cdrecord -scanbus' doesn't work at all, how do I get the "SCSI device" n:n:n?  Use camcontrol?

I see both FreeBSD and NetBSD have makefs (which can make a UFS/FFS or iso file system, taking the place of mkisofs in cdrtools.  But NetBSD has no CD or DVD burner in the base system.

I could also try to build cdrkit and see if that works.

Tom




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20111104092314.23CDC1065672>