Date: Fri, 15 Jun 2012 07:30:01 +0200 From: "Patrick M. Hausen" <hausen@punkt.de> To: "Matthew X. Economou" <xenophon@irtnog.org> Cc: freebsd-stable@freebsd.org Subject: Re: FreeBSD and IPMI how-to (was Re: su problem) Message-ID: <6EFC18AE-E2EE-4D1E-AE1F-EA547202FE26@punkt.de> In-Reply-To: <BABF8C57A778F04791343E5601659908236C25@cinip100ntsbs.irtnog.net> References: <201206101128.q5ABShXN007826@lurza.secnetix.de> <E1Sdgh0-0000tK-Fs@kabab.cs.huji.ac.il> <BABF8C57A778F04791343E5601659908236C25@cinip100ntsbs.irtnog.net>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi, all, Am 15.06.2012 um 03:27 schrieb Matthew X. Economou: > Daniel Braniss writes: >=20 >> just for the record, serial on 8.x works fine! the device naming >> has changed from sio to uart, and maybe some features. We use it >> on all our servers, even redirecting it where possible via >> ILO,IMPI,DRAC. and is great for debuging or saving long trips :-) >=20 > Would some kind soul point me to a howto for configuring IPMI on > FreeBSD? I have a Dell PowerEdge 840 that supports IPMI, but I have > no idea how to set it up - either in the BIOS or in FreeBSD. I've > messed around with ipmitools a little, but I haven't gotten it to > work. Did you kldload ipmi ? What's the output of dmesg kldstat after loading the module? With the module loaded, you should be able to get something like this: devel# ipmitool sensor Ambient | 23.500 | degrees C | ok | na | 1.000 = | 6.000 | 37.000 | 42.000 | na =20 Systemboard | 32.000 | degrees C | ok | na | na = | na | 60.000 | 65.000 | na =20 CPU1 | 49.000 | degrees C | ok | na | na = | na | 93.000 | 97.000 | na =20 CPU2 | 48.000 | degrees C | ok | na | na = | na | 93.000 | 97.000 | na =20 ... FAN1 SYS | 6120.000 | RPM | ok | na | = 1920.000 | na | na | na | na =20 FAN2 SYS | 6480.000 | RPM | ok | na | = 1920.000 | na | na | na | na =20 FAN3 SYS | 6000.000 | RPM | ok | na | = 1920.000 | na | na | na | na =20 FAN4 SYS | 6480.000 | RPM | ok | na | = 1920.000 | na | na | na | na =20 FAN5 SYS | 6120.000 | RPM | ok | na | = 1920.000 | na | na | na | na =20 FAN6 SYS | 6480.000 | RPM | ok | na | = 1920.000 | na | na | na | na =20 FAN7 SYS | 6120.000 | RPM | ok | na | = 1920.000 | na | na | na | na =20 FAN8 SYS | 6480.000 | RPM | ok | na | = 1920.000 | na | na | na | na =20 FAN9 SYS | 6240.000 | RPM | ok | na | = 1920.000 | na | na | na | na =20 FAN10 SYS | 6720.000 | RPM | ok | na | = 1920.000 | na | na | na | na =20 FAN11 SYS | 6240.000 | RPM | ok | na | = 1920.000 | na | na | na | na =20 FAN12 SYS | 6720.000 | RPM | ok | na | = 1920.000 | na | na | na | na =20 PSU1 Power | 100.000 | Watts | ok | na | na = | na | na | na | na =20 PSU2 Power | 96.000 | Watts | ok | na | na = | na | na | na | na =20 Total Power | 196.000 | Watts | ok | na | na = | na | na | na | na =20 Total Power Out | 172.000 | Watts | ok | na | na = | na | na | na | na =20 ... Kind regards, Patrickj --=20 punkt.de GmbH * Kaiserallee 13a * 76133 Karlsruhe Tel. 0721 9109 0 * Fax 0721 9109 100 info@punkt.de http://www.punkt.de Gf: J=FCrgen Egeling AG Mannheim 108285
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?6EFC18AE-E2EE-4D1E-AE1F-EA547202FE26>