Date: Sat, 17 Sep 2011 10:31:19 -0300 From: Luiz Otavio O Souza <lists.br@gmail.com> To: Berislav Purgar <bpurgar@gmail.com> Cc: freebsd-mips@freebsd.org Subject: Re: ubnt routerstation and lan ports ?? Message-ID: <49F9E5C3-D4BF-4273-85BF-30B51A0A75AD@gmail.com> In-Reply-To: <CAAUsrB6uk4SWt7rEx-h%2Bo%2Bv%2B5xeg7VYLAwkeUKgjL27ukUsiYA@mail.gmail.com> References: <CAAUsrB4Mh815MhLwUhGFZ5fNrCLSQDdRdS-PW6p6Hu-051odtg@mail.gmail.com> <CAJ-Vmo=DE6gttcjDP1fFGdHmuwsyZCTutfOxeEd37MtBBVVTOQ@mail.gmail.com> <CAAUsrB513DGsHYP=bQDNPsp16sc6-1%2B1y8REW9Jm1CffQBUVYw@mail.gmail.com> <201109170831.58398.milu@dat.pl> <CAAUsrB6uk4SWt7rEx-h%2Bo%2Bv%2B5xeg7VYLAwkeUKgjL27ukUsiYA@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sep 17, 2011, at 4:37 AM, Berislav Purgar wrote: > 2011/9/17 Maciej Milewski <milu@dat.pl> >=20 >> Hi, >>=20 >> On pi=B1tek, 16 wrze=B6nia 2011 23:31:05 Berislav Purgar wrote: >>> i have tried hint.arge.1.phymask=3D0x70000 / 0x30000 / 70000 and = nothing >> of >>> that can make it to work .. :( >>> tried openwrt to check ports and everything is OK. >>>=20 >>> Beri >> I have this settings in my hints file and arge1 works: >>=20 >> hint.arge.1.at=3D"nexus0" >> hint.arge.1.maddr=3D0x1a000000 >> hint.arge.1.msize=3D0x1000 >> hint.arge.1.irq=3D3 >> # PHY1, PHY2, PHY3 >> hint.arge.1.phymask=3D0x0e >> # should be 100 for RS >> hint.arge.1.media=3D100 >> hint.arge.1.fduplex=3D1 >>=20 >> Kind regards, >> Maciek >>=20 >=20 > Hi >=20 > tried 0x0e (but i think that 0x0e is for RSPRO) and same thing .. > The only thing I noticed is that arge1 is always active regardless of = the > cable was plugged or not. Yes, 0x0e is only valid for rspro. My routerstation worked fine with: # PHY20 =3D 1 << 20 hint.arge.0.phymask=3D0x100000 # PHY16, PHY17 hint.arge.1.phymask=3D0x30000 (plus all the other lines from Maciej example.) Regards, Luiz=
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?49F9E5C3-D4BF-4273-85BF-30B51A0A75AD>