Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 6 Oct 2005 17:32:57 +0200
From:      =?ISO-8859-1?Q?S=F8ren_Schmidt?= <sos@FreeBSD.org>
To:        "Igor A. Valcov" <viaprog@lic1.vsi.ru>
Cc:        freebsd-current@FreeBSD.org
Subject:   Re: 6.0-BETA5 with Silicon Image SiI 3112 SATA150 controller
Message-ID:  <9DD41F79-C31E-4F53-8D5D-B466864750B4@FreeBSD.org>
In-Reply-To: <43452CD6.9030908@lic1.vsi.ru>
References:  <43452CD6.9030908@lic1.vsi.ru>

next in thread | previous in thread | raw e-mail | index | archive | help
On 06/10/2005, at 15:55, Igor A. Valcov wrote:

> Hi, all.
>
> After installing FreeBSD 5.3/5.4 i have SATA problem.
> Upgrading to 6.0-BETA5 from 2005-10-06 RELENG_6 - problem not solved.

You seem to be loosing interrupts, try to move the sii3112 to another =20=

slot so it doesn't share its interrupt with anything. Or better yet =20
get a real SATA controller :)

-S=F8ren

>
> --
> Igor A. Valcov
>
> ATA channel 0:
>     Master: acd0 <SAMSUNG CDRW/DVD SM-352F/T902> ATA/ATAPI revision 0
>     Slave:       no device present
> ATA channel 1:
>     Master:      no device present
>     Slave:       no device present
> ATA channel 2:
>     Master:  ad4 <ST3160827AS/3.42> Serial ATA v1.0
>     Slave:       no device present
> ATA channel 3:
>     Master:  ad6 <ST3160827AS/3.42> Serial ATA v1.0
>     Slave:       no device present
> ATA channel 4:
>     Master:      no device present
>     Slave:       no device present
> ATA channel 5:
>     Master: ad10 <ST380817AS/3.42> Serial ATA v1.0
>     Slave:       no device present
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> ad6: req=3D0xc26a8258 SETFEATURES SET TRANSFER MODE semaphore =20
> timeout !! DANGER Will Robinson !!
> Copyright (c) 1992-2005 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, =20=

> 1994
>     The Regents of the University of California. All rights reserved.
> FreeBSD 6.0-BETA5 #0: Thu Oct  6 12:52:14 MSD 2005
>     root@freebsd6.intercon.ru:/usr/src/sys/i386/compile/VIAPROG
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz (2992.51-MHz 686-class CPU)
>   Origin =3D "GenuineIntel"  Id =3D 0xf34  Stepping =3D 4
>   =20
> Features=3D0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,P=
=20
> GE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE=20=

> >
>   Features2=3D0x441d<SSE3,RSVD2,MON,DS_CPL,CNTX-ID,<b14>>
>   Hyperthreading: 2 logical CPUs
> real memory  =3D 1072889856 (1023 MB)
> avail memory =3D 1045344256 (996 MB)
> ACPI APIC Table: <INTEL  D865PERL>
> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
>  cpu0 (BSP): APIC ID:  0
>  cpu1 (AP): APIC ID:  1
> ioapic0 <Version 2.0> irqs 0-23 on motherboard
> npx0: [FAST]
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> acpi0: <INTEL D865PERL> on motherboard
> acpi0: Power Button (fixed)
> pci_link0: <ACPI PCI Link LNKA> irq 11 on acpi0
> pci_link1: <ACPI PCI Link LNKB> irq 3 on acpi0
> pci_link2: <ACPI PCI Link LNKC> irq 10 on acpi0
> pci_link3: <ACPI PCI Link LNKD> irq 5 on acpi0
> pci_link4: <ACPI PCI Link LNKE> irq 5 on acpi0
> pci_link5: <ACPI PCI Link LNKF> irq 0 on acpi0
> pci_link6: <ACPI PCI Link LNKG> irq 11 on acpi0
> pci_link7: <ACPI PCI Link LNKH> irq 9 on acpi0
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
> cpu0: <ACPI CPU> on acpi0
> acpi_throttle0: <ACPI CPU Throttling> on cpu0
> cpu1: <ACPI CPU> on acpi0
> acpi_throttle1: <ACPI CPU Throttling> on cpu1
> acpi_throttle1: failed to attach P_CNT
> device_attach: acpi_throttle1 attach returned 6
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
> pci1: <ACPI PCI bus> on pcib1
> pci1: <display, VGA> at device 0.0 (no driver attached)
> pci1: <display> at device 0.1 (no driver attached)
> pci0: <serial bus, USB> at device 29.0 (no driver attached)
> pci0: <serial bus, USB> at device 29.1 (no driver attached)
> pci0: <serial bus, USB> at device 29.2 (no driver attached)
> pci0: <serial bus, USB> at device 29.3 (no driver attached)
> pci0: <serial bus, USB> at device 29.7 (no driver attached)
> pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
> pci2: <ACPI PCI bus> on pcib2
> em0: <Intel(R) PRO/1000 Network Connection, Version - 2.1.7> port =20
> 0xbc00-0xbc3f mem 0xff9e0000-0xff9fffff,0xff980000-0xff9bffff irq =20
> 22 at device 1.0 on pci2
> em0: Ethernet address: 00:04:23:a6:99:d9
> em0:  Speed:N/A  Duplex:N/A
> atapci0: <SiI 3112 SATA150 controller> port =20
> 0xb800-0xb807,0xb400-0xb403,0xb000-0xb007,0xac00-0xac03,0xa800-0xa80f =20=

> mem 0xff9dfc00-0xff9dfdff irq 18 at device 4.0 on pci2
> ata2: <ATA channel 0> on atapci0
> ata3: <ATA channel 1> on atapci0
> pci2: <serial bus, FireWire> at device 7.0 (no driver attached)
> fxp0: <Intel 82801BA (D865) Pro/100 VE Ethernet> port 0xa400-0xa43f =20=

> mem 0xff9dd000-0xff9ddfff irq 20 at device 8.0 on pci2
> miibus0: <MII bus> on fxp0
> inphy0: <i82562ET 10/100 media interface> on miibus0
> inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> fxp0: Ethernet address: 00:11:11:c6:d8:24
> isab0: <PCI-ISA bridge> at device 31.0 on pci0
> isa0: <ISA bus> on isab0
> atapci1: <Intel ICH5 UDMA100 controller> port =20
> 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on =20=

> pci0
> ata0: <ATA channel 0> on atapci1
> ata1: <ATA channel 1> on atapci1
> atapci2: <Intel ICH5 SATA150 controller> port =20
> 0xec00-0xec07,0xe800-0xe803,0xe400-0xe407,0xe000-0xe003,0xdc00-0xdc0f =20=

> irq 18 at device 31.2 on pci0
> atapci2: failed to enable memory mapping!
> ata4: <ATA channel 0> on atapci2
> ata5: <ATA channel 1> on atapci2
> pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
> pci0: <multimedia, audio> at device 31.5 (no driver attached)
> acpi_button0: <Sleep Button> on acpi0
> atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> atkbd0: [GIANT-LOCKED]
> psm0: <PS/2 Mouse> irq 12 on atkbdc0
> psm0: [GIANT-LOCKED]
> psm0: model IntelliMouse, device ID 3
> fdc0: <floppy drive controller> port =20
> 0x3f0-0x3f1,0x3f2-0x3f3,0x3f4-0x3f5,0x3f7 irq 6 drq 2 on acpi0
> fdc0: [FAST]
> fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> sio0: configured irq 4 not in bitmap of probed irqs 0
> sio0: port may not be enabled
> sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags =20
> 0x10 on acpi0
> sio0: type 16550A
> orm0: <ISA Option ROMs> at iomem 0xc0000-0xccfff,0xd2000-0xd67ff on =20=

> isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=3D0x300>
> sio1: configured irq 3 not in bitmap of probed irqs 0
> sio1: port may not be enabled
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff =20
> on isa0
> Timecounters tick every 3.333 msec
> ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding =20
> disabled, default to deny, logging unlimited
> acd0: CDRW <SAMSUNG CDRW/DVD SM-352F/T902> at ata0-master UDMA33
> ad4: 152627MB <Seagate ST3160827AS 3.42> at ata2-master SATA150
> ad6: 152627MB <Seagate ST3160827AS 3.42> at ata3-master SATA150
> ad10: 76319MB <Seagate ST380817AS 3.42> at ata5-master SATA150
> SMP: AP CPU #1 Launched!
> Trying to mount root from ufs:/dev/ad4s1a
> WARNING: / was not properly dismounted
> WARNING: /home was not properly dismounted
> WARNING: /tmp was not properly dismounted
> WARNING: /usr was not properly dismounted
> WARNING: /var was not properly dismounted
> uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port =20
> 0xcc00-0xcc1f irq 16 at device 29.0 on pci0
> uhci0: [GIANT-LOCKED]
> usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
> usb0: USB revision 1.0
> uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port =20
> 0xd000-0xd01f irq 19 at device 29.1 on pci0
> uhci1: [GIANT-LOCKED]
> usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
> usb1: USB revision 1.0
> uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> em0: link state changed to UP
> uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port =20
> 0xd400-0xd41f irq 18 at device 29.2 on pci0
> uhci2: [GIANT-LOCKED]
> usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
> usb2: USB revision 1.0
> uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub2: 2 ports with 2 removable, self powered
> uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port =20
> 0xd800-0xd81f irq 16 at device 29.3 on pci0
> uhci3: [GIANT-LOCKED]
> usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3
> usb3: USB revision 1.0
> uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub3: 2 ports with 2 removable, self powered
> ehci0: <EHCI (generic) USB 2.0 controller> mem =20
> 0xffaffc00-0xffafffff irq 23 at device 29.7 on pci0
> ehci0: [GIANT-LOCKED]
> usb4: EHCI version 1.0
> usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
> usb4: <EHCI (generic) USB 2.0 controller> on ehci0
> usb4: USB revision 2.0
> uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
> uhub4: 8 ports with 8 removable, self powered
> KLD daemon_saver.ko: depends on splash - not available
> Copyright (c) 1992-2005 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, =20=

> 1994
>     The Regents of the University of California. All rights reserved.
> FreeBSD 6.0-BETA5 #0: Thu Oct  6 12:52:14 MSD 2005
>     root@freebsd6.intercon.ru:/usr/src/sys/i386/compile/VIAPROG
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz (2992.51-MHz 686-class CPU)
>   Origin =3D "GenuineIntel"  Id =3D 0xf34  Stepping =3D 4
>   =20
> Features=3D0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,P=
=20
> GE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE=20=

> >
>   Features2=3D0x441d<SSE3,RSVD2,MON,DS_CPL,CNTX-ID,<b14>>
>   Hyperthreading: 2 logical CPUs
> real memory  =3D 1072889856 (1023 MB)
> avail memory =3D 1045344256 (996 MB)
> ACPI APIC Table: <INTEL  D865PERL>
> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
>  cpu0 (BSP): APIC ID:  0
>  cpu1 (AP): APIC ID:  1
> ioapic0 <Version 2.0> irqs 0-23 on motherboard
> npx0: [FAST]
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> acpi0: <INTEL D865PERL> on motherboard
> acpi0: Power Button (fixed)
> pci_link0: <ACPI PCI Link LNKA> irq 11 on acpi0
> pci_link1: <ACPI PCI Link LNKB> irq 3 on acpi0
> pci_link2: <ACPI PCI Link LNKC> irq 10 on acpi0
> pci_link3: <ACPI PCI Link LNKD> irq 5 on acpi0
> pci_link4: <ACPI PCI Link LNKE> irq 5 on acpi0
> pci_link5: <ACPI PCI Link LNKF> irq 0 on acpi0
> pci_link6: <ACPI PCI Link LNKG> irq 11 on acpi0
> pci_link7: <ACPI PCI Link LNKH> irq 9 on acpi0
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
> cpu0: <ACPI CPU> on acpi0
> acpi_throttle0: <ACPI CPU Throttling> on cpu0
> cpu1: <ACPI CPU> on acpi0
> acpi_throttle1: <ACPI CPU Throttling> on cpu1
> acpi_throttle1: failed to attach P_CNT
> device_attach: acpi_throttle1 attach returned 6
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
> pci1: <ACPI PCI bus> on pcib1
> pci1: <display, VGA> at device 0.0 (no driver attached)
> pci1: <display> at device 0.1 (no driver attached)
> pci0: <serial bus, USB> at device 29.0 (no driver attached)
> pci0: <serial bus, USB> at device 29.1 (no driver attached)
> pci0: <serial bus, USB> at device 29.2 (no driver attached)
> pci0: <serial bus, USB> at device 29.3 (no driver attached)
> pci0: <serial bus, USB> at device 29.7 (no driver attached)
> pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
> pci2: <ACPI PCI bus> on pcib2
> em0: <Intel(R) PRO/1000 Network Connection, Version - 2.1.7> port =20
> 0xbc00-0xbc3f mem 0xff9e0000-0xff9fffff,0xff980000-0xff9bffff irq =20
> 22 at device 1.0 on pci2
> em0: Ethernet address: 00:04:23:a6:99:d9
> em0:  Speed:N/A  Duplex:N/A
> atapci0: <SiI 3112 SATA150 controller> port =20
> 0xb800-0xb807,0xb400-0xb403,0xb000-0xb007,0xac00-0xac03,0xa800-0xa80f =20=

> mem 0xff9dfc00-0xff9dfdff irq 18 at device 4.0 on pci2
> ata2: <ATA channel 0> on atapci0
> ata3: <ATA channel 1> on atapci0
> pci2: <serial bus, FireWire> at device 7.0 (no driver attached)
> fxp0: <Intel 82801BA (D865) Pro/100 VE Ethernet> port 0xa400-0xa43f =20=

> mem 0xff9dd000-0xff9ddfff irq 20 at device 8.0 on pci2
> miibus0: <MII bus> on fxp0
> inphy0: <i82562ET 10/100 media interface> on miibus0
> inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> fxp0: Ethernet address: 00:11:11:c6:d8:24
> isab0: <PCI-ISA bridge> at device 31.0 on pci0
> isa0: <ISA bus> on isab0
> atapci1: <Intel ICH5 UDMA100 controller> port =20
> 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on =20=

> pci0
> ata0: <ATA channel 0> on atapci1
> ata1: <ATA channel 1> on atapci1
> atapci2: <Intel ICH5 SATA150 controller> port =20
> 0xec00-0xec07,0xe800-0xe803,0xe400-0xe407,0xe000-0xe003,0xdc00-0xdc0f =20=

> irq 18 at device 31.2 on pci0
> atapci2: failed to enable memory mapping!
> ata4: <ATA channel 0> on atapci2
> ata5: <ATA channel 1> on atapci2
> pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
> pci0: <multimedia, audio> at device 31.5 (no driver attached)
> acpi_button0: <Sleep Button> on acpi0
> atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> atkbd0: [GIANT-LOCKED]
> psm0: <PS/2 Mouse> irq 12 on atkbdc0
> psm0: [GIANT-LOCKED]
> psm0: model IntelliMouse, device ID 3
> fdc0: <floppy drive controller> port =20
> 0x3f0-0x3f1,0x3f2-0x3f3,0x3f4-0x3f5,0x3f7 irq 6 drq 2 on acpi0
> fdc0: [FAST]
> fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> sio0: configured irq 4 not in bitmap of probed irqs 0
> sio0: port may not be enabled
> sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags =20
> 0x10 on acpi0
> sio0: type 16550A
> orm0: <ISA Option ROMs> at iomem 0xc0000-0xccfff,0xd2000-0xd67ff on =20=

> isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=3D0x300>
> sio1: configured irq 3 not in bitmap of probed irqs 0
> sio1: port may not be enabled
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff =20
> on isa0
> Timecounters tick every 3.333 msec
> ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding =20
> disabled, default to deny, logging unlimited
> acd0: CDRW <SAMSUNG CDRW/DVD SM-352F/T902> at ata0-master UDMA33
> ad4: 152627MB <Seagate ST3160827AS 3.42> at ata2-master SATA150
> ad6: 152627MB <Seagate ST3160827AS 3.42> at ata3-master SATA150
> ad10: 76319MB <Seagate ST380817AS 3.42> at ata5-master SATA150
> SMP: AP CPU #1 Launched!
> Trying to mount root from ufs:/dev/ad4s1a
> WARNING: / was not properly dismounted
> WARNING: /home was not properly dismounted
> WARNING: /tmp was not properly dismounted
> WARNING: /usr was not properly dismounted
> WARNING: /var was not properly dismounted
> uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port =20
> 0xcc00-0xcc1f irq 16 at device 29.0 on pci0
> uhci0: [GIANT-LOCKED]
> usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
> usb0: USB revision 1.0
> uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port =20
> 0xd000-0xd01f irq 19 at device 29.1 on pci0
> uhci1: [GIANT-LOCKED]
> usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
> usb1: USB revision 1.0
> uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> em0: link state changed to UP
> uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port =20
> 0xd400-0xd41f irq 18 at device 29.2 on pci0
> uhci2: [GIANT-LOCKED]
> usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
> usb2: USB revision 1.0
> uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub2: 2 ports with 2 removable, self powered
> uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port =20
> 0xd800-0xd81f irq 16 at device 29.3 on pci0
> uhci3: [GIANT-LOCKED]
> usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3
> usb3: USB revision 1.0
> uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub3: 2 ports with 2 removable, self powered
> ehci0: <EHCI (generic) USB 2.0 controller> mem =20
> 0xffaffc00-0xffafffff irq 23 at device 29.7 on pci0
> ehci0: [GIANT-LOCKED]
> usb4: EHCI version 1.0
> usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
> usb4: <EHCI (generic) USB 2.0 controller> on ehci0
> usb4: USB revision 2.0
> uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
> uhub4: 8 ports with 8 removable, self powered
> KLD daemon_saver.ko: depends on splash - not available
> fxp0: link state changed to DOWN
> hostb0@pci0:0:0:    class=3D0x060000 card=3D0x25708086 chip=3D0x25708086=
 =20
> rev=3D0x02 hdr=3D0x00
> pcib1@pci0:1:0:    class=3D0x060400 card=3D0x00000000 chip=3D0x25718086 =
=20
> rev=3D0x02 hdr=3D0x01
> uhci0@pci0:29:0:    class=3D0x0c0300 card=3D0x524c8086 chip=3D0x24d28086=
 =20
> rev=3D0x02 hdr=3D0x00
> uhci1@pci0:29:1:    class=3D0x0c0300 card=3D0x524c8086 chip=3D0x24d48086=
 =20
> rev=3D0x02 hdr=3D0x00
> uhci2@pci0:29:2:    class=3D0x0c0300 card=3D0x524c8086 chip=3D0x24d78086=
 =20
> rev=3D0x02 hdr=3D0x00
> uhci3@pci0:29:3:    class=3D0x0c0300 card=3D0x524c8086 chip=3D0x24de8086=
 =20
> rev=3D0x02 hdr=3D0x00
> ehci0@pci0:29:7:    class=3D0x0c0320 card=3D0x524c8086 chip=3D0x24dd8086=
 =20
> rev=3D0x02 hdr=3D0x00
> pcib2@pci0:30:0:    class=3D0x060400 card=3D0x00000000 chip=3D0x244e8086=
 =20
> rev=3D0xc2 hdr=3D0x01
> isab0@pci0:31:0:    class=3D0x060100 card=3D0x00000000 chip=3D0x24d08086=
 =20
> rev=3D0x02 hdr=3D0x00
> atapci1@pci0:31:1:    class=3D0x01018a card=3D0x524c8086 =20
> chip=3D0x24db8086 rev=3D0x02 hdr=3D0x00
> atapci2@pci0:31:2:    class=3D0x01048f card=3D0x524c8086 =20
> chip=3D0x24df8086 rev=3D0x02 hdr=3D0x00
> none0@pci0:31:3:    class=3D0x0c0500 card=3D0x524c8086 chip=3D0x24d38086=
 =20
> rev=3D0x02 hdr=3D0x00
> none1@pci0:31:5:    class=3D0x040100 card=3D0xa0008086 chip=3D0x24d58086=
 =20
> rev=3D0x02 hdr=3D0x00
> none2@pci1:0:0:    class=3D0x030000 card=3D0x4c311002 chip=3D0x59641002 =
=20
> rev=3D0x01 hdr=3D0x00
> none3@pci1:0:1:    class=3D0x038000 card=3D0x4c301002 chip=3D0x5d441002 =
=20
> rev=3D0x01 hdr=3D0x00
> em0@pci2:1:0:    class=3D0x020000 card=3D0x10018086 chip=3D0x10268086 =20=

> rev=3D0x04 hdr=3D0x00
> atapci0@pci2:4:0:    class=3D0x018000 card=3D0x31121095 =
chip=3D0x31121095 =20
> rev=3D0x02 hdr=3D0x00
> none4@pci2:7:0:    class=3D0x0c0010 card=3D0x524c8086 chip=3D0x581111c1 =
=20
> rev=3D0x61 hdr=3D0x00
> fxp0@pci2:8:0:    class=3D0x020000 card=3D0x30208086 chip=3D0x10508086 =
=20
> rev=3D0x01 hdr=3D0x00
> _______________________________________________
> freebsd-current@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-current
> To unsubscribe, send any mail to "freebsd-current-=20
> unsubscribe@freebsd.org"

S=F8ren Schmidt
sos@FreeBSD.org






Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?9DD41F79-C31E-4F53-8D5D-B466864750B4>