Date: Sat, 3 Feb 2001 16:27:16 -0800 (PST) From: thomas@hentschel.net To: mjacob@feral.com Cc: wash@iconnect.co.ke, freebsd-scsi@FreeBSD.ORG Subject: Re: CANNOT ACCESS T20 TAPE Message-ID: <200102040027.f140RHk00571@falcon.home.hentschel.net> In-Reply-To: <Pine.LNX.4.21.0102031443001.27301-100000@zeppo.feral.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On 3 Feb, Matthew Jacob wrote: > >> >> If there's anything else which would help here, please let me know. > > > Go back to HP and tell them write Firmware that actually works? Hehe, if it was in my power... I just inherited that thing. > > RESERVE (as in RESERVE/RELEASE) is an optional command. Instead of returning > "Illegal Command" they're returning "HARDWARE ERROR" with > 'ASC/ASCQ(0x40/0xA0)=<Diagnostic Failure on Component 0xa0>' > > Go into scsi_sa.c:samount and comment out the call to sareservereleaseunit > and ditto fo the call from saclose. Did as you said, here the new output : (sa0:ahc0:0:3:0): saopen(0): dev=0x0 softc=0x0 (sa0:ahc0:0:3:0): sastart(sa0:ahc0:0:3:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 (sa0:ahc0:0:3:0): Key 0x4 ASC/ASCQ 0x40 0xa0 flags 0x0 resid 0 dxfer_len 0 (sa0:ahc0:0:3:0): LOAD UNLOAD. CDB: 1b 0 0 0 1 0 (sa0:ahc0:0:3:0): Key 0x4 ASC/ASCQ 0x40 0xa0 flags 0x0 resid 0 dxfer_len 0 (sa0:ahc0:0:3:0): LOAD UNLOAD. CDB: 1b 0 0 0 1 0 (sa0:ahc0:0:3:0): Key 0x4 ASC/ASCQ 0x40 0xa0 flags 0x0 resid 0 dxfer_len 0 (sa0:ahc0:0:3:0): LOAD UNLOAD. CDB: 1b 0 0 0 1 0 (sa0:ahc0:0:3:0): Key 0x4 ASC/ASCQ 0x40 0xa0 flags 0x0 resid 0 dxfer_len 0 (sa0:ahc0:0:3:0): REWIND. CDB: 1 0 0 0 0 0 (sa0:ahc0:0:3:0): Key 0x4 ASC/ASCQ 0x40 0xa0 flags 0x0 resid 0 dxfer_len 0 (sa0:ahc0:0:3:0): REWIND. CDB: 1 0 0 0 0 0 (sa0:ahc0:0:3:0): Key 0x4 ASC/ASCQ 0x40 0xa0 flags 0x0 resid 0 dxfer_len 0 (sa0:ahc0:0:3:0): REWIND. CDB: 1 0 0 0 0 0 (sa0:ahc0:0:3:0): Key 0x4 ASC/ASCQ 0x40 0xa0 flags 0x0 resid 0 dxfer_len 0 (sa0:ahc0:0:3:0): sastart(sa0:ahc0:0:3:0): RELEASE(06). CDB: 17 0 0 0 0 0 (sa0:ahc0:0:3:0): Key 0x4 ASC/ASCQ 0x40 0xa0 flags 0x0 resid 0 dxfer_len 0 (sa0:ahc0:0:3:0): RELEASE(06). CDB: 17 0 0 0 0 0 (sa0:ahc0:0:3:0): Key 0x4 ASC/ASCQ 0x40 0xa0 flags 0x0 resid 0 dxfer_len 0 (sa0:ahc0:0:3:0): RELEASE(06). CDB: 17 0 0 0 0 0 (sa0:ahc0:0:3:0): Key 0x4 ASC/ASCQ 0x40 0xa0 flags 0x0 resid 0 dxfer_len 0 -Th To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-scsi" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200102040027.f140RHk00571>