Date: Tue, 19 Oct 2004 11:37:44 -0400 (EDT) From: Jason DiCioccio <jd@center.omnins.com> To: FreeBSD-gnats-submit@FreeBSD.org Subject: ports/72886: Errors upgrading php 5.0.1 to 5.0.2 Message-ID: <20041019153744.AB944CEB51@center.omnins.com> Resent-Message-ID: <200410191650.i9JGoOes081862@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 72886 >Category: ports >Synopsis: Errors upgrading php 5.0.1 to 5.0.2 >Confidential: no >Severity: serious >Priority: medium >Responsible: freebsd-ports-bugs >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Tue Oct 19 16:50:23 GMT 2004 >Closed-Date: >Last-Modified: >Originator: Jason DiCioccio >Release: FreeBSD 4.10-RELEASE-p3 i386 >Organization: >Environment: System: FreeBSD center.omnins.com 4.10-RELEASE-p3 FreeBSD 4.10-RELEASE-p3 #1: Sun Sep 26 09:10:51 EDT 2004 root@center.omnins.com:/usr/obj/usr/src/sys/CENTER i386 Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.10-RELEASE-p3 #1: Sun Sep 26 09:10:51 EDT 2004 root@center.omnins.com:/usr/obj/usr/src/sys/CENTER Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 1594411108 Hz CPU: AMD Opteron(tm) Processor 242 (1594.41-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0xf58 Stepping = 8 Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2> AMD Features=0xe0500000<<b20>,AMIE,<b29>,DSP,3DNow!> real memory = 1073676288 (1048512K bytes) avail memory = 1041686528 (1017272K bytes) Preloaded elf kernel "kernel" at 0xc032f000. Pentium Pro MTRR support enabled md0: Malloc disk Using $PIR table, 9 entries at 0xc00f42c0 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 pcib4: <PCI to PCI bridge (vendor=1022 device=7450)> at device 1.0 on pci0 pci3: <PCI bus> on pcib4 pci0: <unknown card> (vendor=0x1022, dev=0x7451) at 1.1 pcib5: <PCI to PCI bridge (vendor=1022 device=7450)> at device 2.0 on pci0 pci2: <PCI bus> on pcib5 bge0: <Broadcom BCM5704C Dual Gigabit Ethernet, ASIC rev. 0x2002> mem 0xfe9c0000-0xfe9cffff,0xfe9d0000-0xfe9dffff irq 10 at device 3.0 on pci2 bge0: Ethernet address: 00:00:1a:19:aa:7f miibus0: <MII bus> on bge0 brgphy0: <BCM5704 10/100/1000baseTX PHY> on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto bge1: <Broadcom BCM5704C Dual Gigabit Ethernet, ASIC rev. 0x2002> mem 0xfe9e0000-0xfe9effff,0xfe9f0000-0xfe9fffff irq 11 at device 3.1 on pci2 bge1: Ethernet address: 00:00:1a:19:aa:80 miibus1: <MII bus> on bge1 brgphy1: <BCM5704 10/100/1000baseTX PHY> on miibus1 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto pci0: <unknown card> (vendor=0x1022, dev=0x7451) at 2.1 pcib6: <PCI to PCI bridge (vendor=1022 device=7460)> at device 6.0 on pci0 pci1: <PCI bus> on pcib6 pci1: <OHCI USB controller> at 0.0 irq 10 pci1: <OHCI USB controller> at 0.1 irq 10 pci1: <ATI Mach64-GR graphics accelerator> at 4.0 irq 11 isab0: <PCI to ISA bridge (vendor=1022 device=7468)> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <AMD 8111 ATA133 controller> port 0xffa0-0xffaf at device 7.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 chip0: <PCI to Other bridge (vendor=1022 device=746b)> at device 7.3 on pci0 pcib1: <Host to PCI bridge> on motherboard pci4: <PCI bus> on pcib1 pcib2: <Host to PCI bridge> on motherboard pci5: <PCI bus> on pcib2 pcib3: <Host to PCI bridge> on motherboard pci6: <PCI bus> on pcib3 orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc97ff,0xc9800-0xcafff,0xcb000-0xcbfff on isa0 pmtimer0 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x100> sio0: configured irq 4 not in bitmap of probed irqs 0 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A, console sio1: configured irq 3 not in bitmap of probed irqs 0 IP packet filtering initialized, divert disabled, rule-based forwarding enabled, default to accept, logging disabled IP Filter: v3.4.31 initialized. Default = pass all, Logging = disabled ad0: 76319MB <WDC WD800BB-00FJA0> [155061/16/63] at ata0-master UDMA100 ad3: 76319MB <WDC WD800BB-00FJA0> [155061/16/63] at ata1-slave UDMA100 Mounting root from ufs:/dev/ad0s1a Installed packages: ================== ImageMagick-6.0.6.2 XFree86-libraries-4.4.0_1 amavisd-new-2.1.2,1 apache-2.0.52_1 apr-db4-1.0.0 apr-nothr-db4-1.0.0 arc-5.21j autoconf-2.53_3 autoconf-2.59_2 automake-1.5_2,1 automake-1.9.2 bash-3.0.13 bison-1.75_2 cabextract-1.0 cclient-2004a,1 clamav-0.80.r4 cvsup-without-gui-16.1h cyrus-imapd-2.2.8 cyrus-sasl-2.1.19_1 daemontools-0.76_9 db3-3.3.11_2,1 db4-4.0.14_1,1 db42-4.2.52_3 djbdns-ipv6-1.05.b14_8 expat-1.95.8 fontconfig-2.2.3,1 freetype2-2.1.7_3 freeze-2.5_1 gettext-0.13.1_1 ghostscript-gnu-7.07_11 gmake-3.80_2 gnuls-4.1 gsfonts-8.11_2 help2man-1.33.1 imake-4.4.0 jasper-1.701.0 jbigkit-1.6 jpeg-6b_3 lcms-1.13,1 lha-1.14i_6 libfpx-1.2.0.9 libgmp-4.1.3 libgnugetopt-1.2 libiconv-1.9.2_1 libltdl-1.5.10 libmcrypt-2.5.7_1 libtool-1.3.5_2 libtool-1.5.10 libwmf-0.2.8.3 libxml2-2.6.14 lzo-1.08_1 lzop-1.01 m4-1.4.1 makedepend-2000.12.28 mhash-0.8.18 mpeg2codec-1.2_1 neon-0.24.7 nmap-3.71.p1 p5-Archive-Tar-1.10 p5-Archive-Zip-1.13 p5-BerkeleyDB-0.25_1 p5-Compress-Zlib-1.33 p5-Convert-BinHex-1.119 p5-Convert-TNEF-0.17 p5-Convert-UUlib-1.03,1 p5-Digest-HMAC-1.01 p5-Digest-SHA1-2.10 p5-HTML-Parser-3.36 p5-HTML-Tagset-3.03 p5-IO-Zlib-1.01 p5-IO-stringy-2.108 p5-MIME-Base64-3.05 p5-MIME-Tools-5.414,2 p5-Mail-SpamAssassin-3.0.0 p5-Mail-Tools-1.64 p5-Net-DNS-0.48 p5-Net-Server-0.87 p5-URI-1.34 p5-Unix-Syslog-0.100 p5-gettext-1.03 pcre-5.0 pdflib-6.0.0p1 pecl-imagick-0.9.11 pecl-pdflib-2.0.1 pecl-zip-1.0 perl-5.8.5 php5-5.0.1 php5-calendar-5.0.1 php5-ctype-5.0.1 php5-dio-5.0.1 php5-dom-5.0.1 php5-extensions-1.0 php5-gd-5.0.1 php5-iconv-5.0.1 php5-imap-5.0.1 php5-mbstring-5.0.1 php5-mcrypt-5.0.1 php5-mhash-5.0.1 php5-openssl-5.0.1 php5-pcre-5.0.1 php5-pgsql-5.0.1 php5-posix-5.0.1 php5-session-5.0.1 php5-simplexml-5.0.1 php5-sockets-5.0.1 php5-sqlite-5.0.1 php5-tokenizer-5.0.1 php5-xml-5.0.1 php5-zlib-5.0.1 pkg_install-devel-20040811 pkgconfig-0.15.0_1 pkgdb.db png-1.2.7 portaudit-0.5.9 portupgrade-20040701_3 postfix-2.1.5,1 postgresql-7.4.3 python-2.3.4_2 razor-agents-2.61_3 rc_subr-1.31 rpm2cpio-1.2_2 ruby-1.8.2.p2_1 ruby18-aspectr-0.3.5 ruby18-bdb1-0.2.2 ruby18-dbd_pg-0.0.23_1 ruby18-dbi-0.0.23 ruby18-htmlsplit-1.0.2 ruby18-postgres-0.7.1_1 screen-4.0.2_1 sim-3.2.0 subversion-1.0.8 sudo-1.6.8.1 t1lib-5.0.1,1 tiff-3.6.1_3 ucspi-tcp-0.88 unarj-2.43_1 unrar-3.43,3 unzip-5.51 uvscan-4.32e_1 uvscan_dat-4388 zoo-2.10.1 zsh-4.2.1 zziplib-0.10.82 >Description: Greetings, I am receiving the following output when trying to upgrade PHP 5.0.1 to 5.0.2 via portupgrade. The box is running apache 2.0.52 and has never run anything but apache2 (never run 1.x). ---> Upgrading 'php5-5.0.1' to 'php5-5.0.2' (lang/php5) ---> Building '/usr/ports/lang/php5' ===> Cleaning for libiconv-1.9.2_1 ===> Cleaning for autoconf-2.59_2 ===> Cleaning for bison-1.75_2 ===> Cleaning for gettext-0.13.1_1 ===> Cleaning for gmake-3.80_2 ===> Cleaning for libtool-1.3.5_2 ===> Cleaning for libtool-1.5.10 ===> Cleaning for m4-1.4.1 ===> Cleaning for p5-gettext-1.03 ===> Cleaning for pkgconfig-0.15.0_1 ===> Cleaning for perl-5.8.5 ===> Cleaning for help2man-1.33.1 ===> Cleaning for rc_subr-1.31 ===> Cleaning for expat-1.95.8 ===> Cleaning for libxml2-2.6.14 ===> Cleaning for apache-2.0.52_1 ===> Cleaning for php5-5.0.2 ===> Found saved configuration for php5-5.0.1 ===> Extracting for php5-5.0.2 >How-To-Repeat: >Fix: >Release-Note: >Audit-Trail: >Unformatted: >> Checksum OK for php-5.0.2.tar.bz2. ===> Patching for php5-5.0.2 ===> Applying FreeBSD patches for php5-5.0.2 ===> php5-5.0.2 depends on file: /usr/local/sbin/apxs - found ===> php5-5.0.2 depends on executable: bison - found ===> php5-5.0.2 depends on executable: pkg-config - found ===> php5-5.0.2 depends on shared library: xml2.5 - found ===> Configuring for php5-5.0.2 You are building the Apache Module and the Command Line Interpreter of PHP. Use port: lang/php5-cli for Command Line Interpreter only www/php5-cgi for Common Gateway Interface only www/mod_php5 for Apache Module only creating cache ./config.cache checking host system type... i386-portbld-freebsd4.10 checking for gcc... cc checking whether the C compiler (cc -O -pipe ) works... yes checking whether the C compiler (cc -O -pipe ) is a cross-compiler... no checking whether we are using GNU C... yes checking whether cc accepts -g... yes checking whether cc understands -c and -o together... yes checking how to run the C preprocessor... cc -E checking for AIX... no checking if compiler supports -R... yes checking for re2c... exit 0; checking for ranlib... ranlib checking whether ln -s works... yes checking for mawk... no checking for gawk... no checking for nawk... nawk checking for bison... bison -y checking bison version... 1.75 (ok) checking for flex... flex checking for yywrap in -lfl... yes checking lex output file root... lex.yy checking whether yytext is a pointer... yes checking for working const... yes checking flex version... 2.5.4 (ok) checking for pthreads_cflags... (cached) -D_THREAD_SAFE checking for pthreads_lib... (cached) -pthread Configuring SAPI modules checking for AOLserver support... no checking for Apache 1.x module support via DSO through APXS... no checking for Apache 1.x module support... no checking for member fd in BUFF *... no checking for mod_charset compatibility option... no checking for Apache 2.0 filter-module support via DSO through APXS... no checking for Apache 2.0 handler-module support via DSO through APXS... expr: non-numeric argument configure: error: You have enabled Apache 2 support while your server is Apache 1.3. Please use the appropiate switch --with-apxs (without the 2) ===> Script "configure" failed unexpectedly. Please report the problem to ale@FreeBSD.org [maintainer] and attach the "/usr/ports/lang/php5/work/php-5.0.2/config.log" including the output of the failure of your make command. Also, it might be a good idea to provide an overview of all packages installed on your system (e.g. an `ls /var/db/pkg`). *** Error code 1 Stop in /usr/ports/lang/php5.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20041019153744.AB944CEB51>