Date: Wed, 31 Oct 2007 14:24:28 +1300 From: Philip Murray <pmurray@nevada.net.nz> To: Jack Vogel <jfvogel@gmail.com> Cc: freebsd-stable@freebsd.org Subject: Re: em watchdog problem Message-ID: <9B40D12A-4657-43F9-8746-6AE87EA31199@nevada.net.nz> In-Reply-To: <2a41acea0710301016u4a0008dfjc83170257337863c@mail.gmail.com> References: <2a41acea0710301016u4a0008dfjc83170257337863c@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On 31/10/2007, at 6:16 AM, Jack Vogel wrote:
> This morning I had an idea about what the source of the watchdog
> problem is. Also, we have repro'd at least one type of watchdog
> inhouse.
>
> One question, is this problem only happening for those running
> STABLE with the 6.6.6 merged driver?
>
> We found the problem does not seem to happen on 7.0.
>
Sorry to burst your bubble, but it just happened to me on a 7.0-BETA1
machine running 6.5.3. This machine (Supermicro P4SC8 board) had been
running without problems for almost a year previously.
It's still happening often on a 6.2-STABLE machine (as previously
reported).
Was doing around 40Mbit/sec of Rsync traffic at the time. Again, em0
shares an interrupt (this time with atapci, not uhci)
dmesg:
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights
reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-BETA1 #0: Mon Oct 29 23:34:49 NZDT 2007
root@zzxyz.open2view.net:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 3.20GHz (3194.56-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf41 Stepping = 1
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE
,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x441d<SSE3,RSVD2,MON,DS_CPL,CNXT-ID,xTPR>
real memory = 1072562176 (1022 MB)
avail memory = 1035980800 (987 MB)
ACPI APIC Table: <IntelR AWRDACPI>
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413,
RF5413)
acpi0: <IntelR AWRDACPI> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 3fde0000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
cpu0: <ACPI CPU> on acpi0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci1: <ACPI PCI bus> on pcib1
em0: <Intel(R) PRO/1000 Network Connection Version - 6.5.3> port
0xc000-0xc01f mem 0xf2100000-0xf211ffff irq 18 at device 1.0 on pci1
em0: Ethernet address: 00:30:48:81:e1:9e
em0: [FILTER]
pcib2: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <PCI-PCI bridge> at device 1.0 on pci2
pci3: <PCI bus> on pcib3
arcmsr0: <Areca SATA Host Adapter RAID Controller
> mem 0xf2010000-0xf2010fff irq 26 at device 14.0 on pci3
ARECA RAID ADAPTER0: Driver Version 1.20.00.14 2007-2-05
ARECA RAID ADAPTER0: FIRMWARE VERSION V1.36 2005-3-31
arcmsr0: [ITHREAD]
uhci0: <UHCI (generic) USB controller> port 0xe100-0xe11f irq 16 at
device 29.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0xe000-0xe01f irq 19 at
device 29.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
pci0: <base peripheral> at device 29.4 (no driver attached)
ehci0: <Intel 6300ESB USB 2.0 controller> mem 0xf2200000-0xf22003ff
irq 23 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb2: EHCI version 1.0
usb2: companion controllers, 2 ports each: usb0 usb1
usb2: <Intel 6300ESB USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb2
uhub2: 4 ports with 4 removable, self powered
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci4: <ACPI PCI bus> on pcib4
vgapci0: <VGA-compatible display> port 0xd000-0xd0ff mem
0xf0000000-0xf0ffffff,0xf1040000-0xf1040fff irq 16 at device 9.0 on pci4
em1: <Intel(R) PRO/1000 Network Connection Version - 6.5.3> port
0xd100-0xd13f mem 0xf1000000-0xf101ffff irq 19 at device 10.0 on pci4
em1: Ethernet address: 00:30:48:81:e1:9f
em1: [FILTER]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel 6300ESB UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
atapci1: <Intel 6300ESB SATA150 controller> port
0xe200-0xe207,0xe300-0xe303,0xe400-0xe407,0xe500-0xe503,0xe600-0xe60f
irq 18 at device 31.2 on pci0
atapci1: [ITHREAD]
ata2: <ATA channel 0> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
acpi0
fdc0: [FILTER]
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10
on acpi0
sio0: type 16550A
sio0: [FILTER]
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
sio1: [FILTER]
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff pnpid ORM0000 on isa0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
ppi0: <Parallel I/O> on ppbus0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppc0: [GIANT-LOCKED]
ppc0: [ITHREAD]
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
Timecounter "TSC" frequency 3194562256 Hz quality 800
Timecounters tick every 1.000 msec
Waiting 5 seconds for SCSI devices to settle
acd0: CDROM <CD-224E/1.9A> at ata0-master UDMA33
da0 at arcmsr0 bus 0 target 0 lun 0
da0: <Areca ARC-1110-VOL#00 R001> Fixed Direct Access SCSI-3 device
da0: 166.666MB/s transfers (83.333MHz, offset 32, 16bit)
da0: 76293MB (156249600 512 byte sectors: 255H 63S/T 9726C)
da1 at arcmsr0 bus 0 target 0 lun 1
da1: <Areca ARC-1110-VOL#01 R001> Fixed Direct Access SCSI-3 device
da1: 166.666MB/s transfers (83.333MHz, offset 32, 16bit)
da1: 2784728MB (5703123456 512 byte sectors: 255H 63S/T 355003C)
GEOM_JOURNAL: Journal 490099366: da1p1 contains data.
GEOM_JOURNAL: Journal 490099366: da1p1 contains journal.
Trying to mount root from ufs:/dev/da0s1a
WARNING: / was not properly dismounted
GEOM_JOURNAL: Journal da1p1 consistent.
WARNING: /tmp was not properly dismounted
WARNING: /usr was not properly dismounted
WARNING: /var was not properly dismounted
arplookup 210.55.230.210 failed: host is not on local network
ichsmb0: <Intel 6300ESB (ICH) SMBus controller> port 0x500-0x51f irq
17 at device 31.3 on pci0
ichsmb0: [GIANT-LOCKED]
ichsmb0: [ITHREAD]
smbus0: <System Management Bus> on ichsmb0
smb0: <SMBus generic I/O> on smbus0
em0: watchdog timeout -- resetting
em0: link state changed to DOWN
em0: link state changed to UP
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?9B40D12A-4657-43F9-8746-6AE87EA31199>