Date: Fri, 12 Aug 2011 11:43:36 -0600 (MDT) From: Warren Block <wblock@wonkity.com> To: freebsd-acpi@freebsd.org Subject: Thinkpad T42 power button Message-ID: <alpine.BSF.2.00.1108121133100.55641@wonkity.com>
next in thread | raw e-mail | index | archive | help
With an update from 8.2-prerelease to the latest 8.2-stable, the power button on a Thinkpad T42 no longer shuts the machine down. iasl compiles the stock ASL without complaints. Ports have been updated, but the BIOS firmware and settings haven't changed. FreeBSD t42 8.2-STABLE FreeBSD 8.2-STABLE #0: Fri Aug 12 02:06:35 MDT 2011 root@t42:/usr/obj/usr/src/sys/T42 i386 Copyright (c) 1992-2011 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.2-STABLE #0: Fri Aug 12 02:06:35 MDT 2011 root@t42:/usr/obj/usr/src/sys/T42 i386 Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) M processor 1.70GHz (1694.51-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6d6 Family = 6 Model = d Stepping = 6 Features=0xafe9f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE> Features2=0x180<EST,TM2> real memory = 1610612736 (1536 MB) avail memory = 1563176960 (1490 MB) kbd1 at kbdmux0 ACPI Warning: 32/64X length mismatch in Gpe1Block: 0/32 (20101013/tbfadt-625) ACPI Warning: Optional field Gpe1Block has zero address or length: 0x000000000000102C/0x0 (20101013/tbfadt-655) acpi0: <IBM TP-1R> on motherboard acpi0: [ITHREAD] acpi_ec0: <Embedded Controller: GPE 0x1c, ECDT> port 0x62,0x66 on acpi0 acpi0: Power Button (fixed) acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, 5ff00000 (3) failed Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 agp0: <Intel 82855 host to AGP bridge> on hostb0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0x3000-0x30ff mem 0xe0000000-0xe7ffffff,0xc0100000-0xc010ffff irq 11 at device 0.0 on pci1 uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0x1800-0x181f irq 11 at device 29.0 on pci0 uhci0: [ITHREAD] usbus0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0 uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0x1820-0x183f irq 11 at device 29.1 on pci0 uhci1: [ITHREAD] usbus1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1 uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0x1840-0x185f irq 11 at device 29.2 on pci0 uhci2: [ITHREAD] usbus2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2 ehci0: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> mem 0xc0000000-0xc00003ff irq 11 at device 29.7 on pci0 ehci0: [ITHREAD] usbus3: EHCI version 1.0 usbus3: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> on ehci0 pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pci2: <bridge, PCI-CardBus> at device 0.0 (no driver attached) pci2: <bridge, PCI-CardBus> at device 0.1 (no driver attached) em0: <Intel(R) PRO/1000 Legacy Network Connection 1.0.3> port 0x8000-0x803f mem 0xc0220000-0xc023ffff,0xc0200000-0xc020ffff irq 11 at device 1.0 on pci2 em0: [FILTER] em0: Ethernet address: 00:0d:60:7a:70:d9 ipw0: <Intel(R) PRO/Wireless 2100 MiniPCI> mem 0xc0214000-0xc0214fff irq 11 at device 2.0 on pci2 ipw0: [ITHREAD] isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH4 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1860-0x186f at device 31.1 on pci0 ata0: <ATA channel 0> on atapci0 ata0: [ITHREAD] ata1: <ATA channel 1> on atapci0 ata1: [ITHREAD] pci0: <serial bus, SMBus> at device 31.3 (no driver attached) pcm0: <Intel ICH4 (82801DB)> port 0x1c00-0x1cff,0x18c0-0x18ff mem 0xc0000c00-0xc0000dff,0xc0000800-0xc00008ff irq 5 at device 31.5 on pci0 pcm0: [ITHREAD] pcm0: <Analog Devices AD1981B AC97 Codec> pci0: <simple comms, generic modem> at device 31.6 (no driver attached) acpi_tz0: <Thermal Zone> on acpi0 atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model Generic PS/2 mouse, device ID 0 battery0: <ACPI Control Method Battery> on acpi0 acpi_acad0: <AC Adapter> on acpi0 acpi_ibm0: <IBM ThinkPad ACPI Extras> on acpi0 pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xd0000-0xd0fff,0xd1000-0xd1fff,0xdc000-0xdffff,0xe0000-0xeffff pnpid ORM0000 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 p4tcc0: <CPU Frequency Thermal Control> on cpu0 Timecounter "TSC" frequency 1694510270 Hz quality 800 Timecounters tick every 1.000 msec usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 480Mbps High Speed USB v2.0 ad0: 57231MB <HTS726060M9AT00 MH4OA68A> at ata0-master UDMA100 ugen0.1: <Intel> at usbus0 uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <Intel> at usbus1 uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen2.1: <Intel> at usbus2 uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 ugen3.1: <Intel> at usbus3 uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 GEOM: ad0s1: geometry does not match label (255h,63s != 16h,63s). acd0: CDRW <HL-DT-STCD-RW/DVD DRIVE GCC-4242N/0201> at ata1-master UDMA33 Root mount waiting for: usbus3 usbus2 usbus1 usbus0 uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered Root mount waiting for: usbus3 Root mount waiting for: usbus3 uhub3: 6 ports with 6 removable, self powered Trying to mount root from ufs:/dev/ad0s1a ugen1.2: <Microsoft> at usbus1 ums0: <Microsoft Microsoft 3-Button Mouse with IntelliEyeTM, class 0/0, rev 1.10/3.00, addr 2> on usbus1 ums0: 3 buttons and [XYZ] coordinates ID=0 acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 (probe0:ata1:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 (probe0:ata1:0:0:0): CAM status: SCSI Status Error (probe0:ata1:0:0:0): SCSI status: Check Condition (probe0:ata1:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present) cd0 at ata1 bus 0 scbus1 target 0 lun 0 cd0: <HL-DT-ST RW/DVD GCC-4242N 0201> Removable CD-ROM SCSI-0 device cd0: 33.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present wlan0: Ethernet address: 00:0c:f1:4e:b1:ac ipw0: need multicast update callback ipw0: need multicast update callback ipw0: need multicast update callback drm0: <ATI Radeon LW RV200 Mobility 7500 M7> on vgapci0 info: [drm] AGP at 0xd0000000 256MB info: [drm] Initialized radeon 1.31.0 20080613 info: [drm] Setting GART location based on new memory map info: [drm] Loading R100 Microcode info: [drm] writeback test succeeded in 2 usecs drm0: [ITHREAD]
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?alpine.BSF.2.00.1108121133100.55641>