Date: Thu, 04 Dec 2008 03:02:39 +0100 From: Hilko Meyer <Hilko.Meyer@gmx.de> To: Ulf Lilleengen <lulf@stud.ntnu.no> Cc: adnan@hochpass.uni-hannover.de, freebsd-geom@freebsd.org Subject: Re: System freeze with gvinum Message-ID: <mucej495asrgc6s5gfu4clp7feeluat1bl@mail.gmx.net> In-Reply-To: <20081201021720.GA1949@carrot.studby.ntnu.no> References: <fmg3j4lkbngkmcm41lvbrjvuj2o4iagcvb@4ax.com> <20081130153558.GA2120@nobby.lan> <des5j4pqfbceh1hg4ad26arivjdmcqvr7m@mail.gmx.net> <20081130222445.GA1528@carrot.studby.ntnu.no> <nh86j4h8c0hf2musqeubinbqp5snrfmm8h@mail.gmx.net> <20081201021720.GA1949@carrot.studby.ntnu.no>
next in thread | previous in thread | raw e-mail | index | archive | help
Ulf Lilleengen schrieb: >On man, des 01, 2008 at 12:32:22am +0100, Hilko Meyer wrote: >> Is gvinum in 7.1RC and 7.x the same? We considered to update to 7.1 >> before it's released anyway, because we need nfe(4). And wanted to = try >> gvinum and zfs there. >Yes, they are the same. >>=20 >> But we can test a patch against 6.4 before the big update if you want. >>=20 >It's really up to you. If you're going to upgrade anyway, it will at = least >save me from a little bit of work :) Unfortunately I have some other work for you. After changing the BIOS-setting to AHCI, I tried gvinum with 6.4 again. And strangely enough it worked. No freeze with newfs and I could copy several GB to the volumes, but after a reboot gvinum list looks like that: | D sata3 State: up /dev/ad10 A: 9/476939 MB = (0%) | D sata2 State: up /dev/ad8 A: 9/476939 MB = (0%) | D sata1 State: up /dev/ad4 A: 9/476939 MB = (0%) |=20 | 2 volumes: | V homes_raid5 State: down Plexes: 1 Size: = 465 GB | V dump_raid5 State: down Plexes: 1 Size: = 465 GB |=20 | 2 plexes: | P homes_raid5.p0 R5 State: down Subdisks: 3 Size: = 465 GB | P dump_raid5.p0 R5 State: down Subdisks: 3 Size: = 465 GB |=20 | 6 subdisks: | S homes_raid5.p0.s0 State: stale D: sata1 Size: = 232 GB | S homes_raid5.p0.s1 State: stale D: sata2 Size: = 232 GB | S homes_raid5.p0.s2 State: stale D: sata3 Size: = 232 GB | S dump_raid5.p0.s0 State: stale D: sata1 Size: = 232 GB | S dump_raid5.p0.s1 State: stale D: sata2 Size: = 232 GB | S dump_raid5.p0.s2 State: stale D: sata3 Size: = 232 GB Then we updated to FreeBSD 7.1-PRERELEASE, but nothing changed. After a reboot the volumes are down. In dmesg I found g_vfs_done():gvinum/dump_raid5[READ(offset=3D65536, length=3D8192)]error = =3D 6 but I think, that occurred during a try to mount a volume. bye, Hilko
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?mucej495asrgc6s5gfu4clp7feeluat1bl>