Date: Mon, 8 Mar 2010 17:18:51 -0800 (PST) From: zaxis <z_axis@163.com> To: freebsd-emulation@freebsd.org Subject: Re: VirtualBox won't start Message-ID: <27830150.post@talk.nabble.com> In-Reply-To: <201003082029.o28KTnsa015716@pluto.hedeland.org> References: <201003031701.o23H1SVM038408@pluto.hedeland.org> <201003082029.o28KTnsa015716@pluto.hedeland.org>
next in thread | previous in thread | raw e-mail | index | archive | help
Maybe same pronlem: http://old.nabble.com/After-customizing-8.0-kernel%2C-the-VirtualBox-doesnot-appear---ts27673399.html Up to now it cannot be fixed even reinstall everything associated with VBOX such as qt4, and so on. Per Hedeland wrote: > > Well, in the absence of any feedback on the below, I went and re-read > the wiki, including "Known Issues in previous versions of the port" > which shouldn't be relevant, and there, lo and behold, was a description > of this exact problem, with the advice "Kill one of them" - and it > worked. After getting rid of a non-virtualbox-specific issue with the > networking, I'm now up and running with a Linux guest - very nice. > > But, apparently this problem is not completely fixed in the 3.1.2 > version - and since it was supposed to be fixed, I assume that someone > knows something about it. Is there some debugging etc that I can do to > track it down? The behavior is completely reproducible, and the > workaround, while apparently reproducible too, will become annoying > after a while I think.:-) > > --Per Hedeland > > Per Hedeland <per@hedeland.org> wrote: >> >>Hello, >> >>I was really looking forward to trying out VirtualBox after all the good >>reports here, but it was not to be:-) - when I try to start it with >>simply 'VirtualBox', it just sits there, doing basically nothing at >>all... >> >>This is on i386 7.2-RELEASE, virtualbox-ose-3.1.2_1 and >>virtualbox-ose-kmod-3.1.2_1 built from ports with default config and no >>issues, vboxdrv.ko/vboxnetflt.ko/vboxnetadp.ko loaded fine as per >>instructions. >> >>Below is the tail of a ktrace - the original process (1421) forks >>(1422), and then 1421 is repeatedly and unsuccessfully polling on what I >>believe is a pipe to 1422, while 1422 seems stuck in a _umtx_op() >>call. The SIGINT is me hitting ^C (which works "fine"), rather quickly >>here but I have also tried waiting a long time, it just keeps polling >>forever. >> >>Any ideas about what the problem might be would be appreciated! >> >>Thanks >>--Per Hedeland >> >> >> 1421 VirtualBox CALL fork >> 1421 VirtualBox RET fork 1422/0x58e >> 1422 VirtualBox RET fork 0 >> 1422 VirtualBox CALL thr_self(0x88301040) >> 1422 VirtualBox RET thr_self 0 >> 1421 VirtualBox CALL sigprocmask(SIG_SETMASK,0x883010d8,0) >> 1421 VirtualBox RET sigprocmask 0 >> 1421 VirtualBox CALL _umtx_op(0x88092dc4,0x12,0,0,0) >> 1421 VirtualBox RET _umtx_op 0 >> 1421 VirtualBox CALL _umtx_op(0x804edfc,0x11,0,0,0) >> 1421 VirtualBox RET _umtx_op 0 >> 1422 VirtualBox CALL getpid >> 1422 VirtualBox RET getpid 1422/0x58e >> 1421 VirtualBox CALL _umtx_op(0x804edfc,0x12,0,0,0) >> 1421 VirtualBox RET _umtx_op 0 >> 1422 VirtualBox CALL sysarch(0xa,0xbfbf76c0) >> 1422 VirtualBox RET sysarch 0 >> 1421 VirtualBox CALL >> mmap(0,0x100000,PROT_READ|PROT_WRITE,MAP_PRIVATE|MAP_ANON,0xffffffff,0,0) >> 1422 VirtualBox CALL sigprocmask(SIG_SETMASK,0x883010d8,0) >> 1421 VirtualBox RET mmap -1975517184/0x8a400000 >> 1421 VirtualBox RET _umtx_op 0 >> 1422 VirtualBox RET sigprocmask 0 >> 1422 VirtualBox CALL _umtx_op(0x88092e0c,0x12,0,0,0) >> 1422 VirtualBox RET _umtx_op 0 >> 1422 VirtualBox CALL _umtx_op(0x88092de8,0x12,0,0,0) >> 1422 VirtualBox RET _umtx_op 0 >> 1422 VirtualBox CALL _umtx_op(0x88092dc4,0x12,0,0,0) >> 1422 VirtualBox RET _umtx_op 0 >> 1421 VirtualBox CALL close(0xf) >> 1421 VirtualBox RET close 0 >> 1421 VirtualBox CALL read(0xe,0xbfbf782b,0x1) >> 1421 VirtualBox RET read -1 errno 35 Resource temporarily unavailable >> 1422 VirtualBox CALL _umtx_op(0x804edfc,0x11,0,0,0) >> 1421 VirtualBox CALL poll(0xbfbf7764,0x1,0x1388) >> 1421 VirtualBox CALL wait4(0,0xbf9fef08,<invalid>0,0) >> 1421 VirtualBox RET poll 0 >> 1421 VirtualBox CALL poll(0xbfbf7764,0x1,0x1388) >> 1421 VirtualBox RET poll 0 >> 1421 VirtualBox CALL poll(0xbfbf7764,0x1,0x1388) >> 1421 VirtualBox RET poll 0 >> 1421 VirtualBox CALL poll(0xbfbf7764,0x1,0x1388) >> 1421 VirtualBox RET wait4 RESTART >> 1421 VirtualBox PSIG SIGINT SIG_DFL >> 1422 VirtualBox RET _umtx_op RESTART >> 1422 VirtualBox PSIG SIGINT SIG_DFL > _______________________________________________ > freebsd-emulation@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-emulation > To unsubscribe, send any mail to > "freebsd-emulation-unsubscribe@freebsd.org" > > ----- fac n = let { f = foldr (*) 1 [1..n] } in f -- View this message in context: http://old.nabble.com/VirtualBox-won%27t-start-tp27771054p27830150.html Sent from the freebsd-emulation mailing list archive at Nabble.com.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?27830150.post>