Date: Mon, 16 Jun 2003 22:15:36 -0700 From: Kent Stewart <kstewart@owt.com> To: "Duke, Brian" <Brian.Duke@Level3.com>, <freebsd-questions@freebsd.org> Subject: Re: Buildworld ERROR CODE 2 Message-ID: <200306162215.36606.kstewart@owt.com> In-Reply-To: <1AD041D9121C43498ACFBCBF1B3FE2480B27FA@idc1exc0004.corp.global.level3.com> References: <1AD041D9121C43498ACFBCBF1B3FE2480B27FA@idc1exc0004.corp.global.level3.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Monday 16 June 2003 09:02 pm, Duke, Brian wrote: > ok I didn't get an answer on my first email so I tried to do a complete > buildworld here is a transcript of the output: > > ranlib libc_pic.a > ranlib libc_p.a > ranlib libc.a > install -C -C -o root -g wheel -m 444 libc.a /usr/obj/usr/src/i386/usr/lib > install -C -C -o root -g wheel -m 444 libc_p.a > /usr/obj/usr/src/i386/usr/lib install -C -s -o root -g wheel -m 444 =20 > libc.so.5 /usr/obj/usr/src/i386/usr/lib ln -fs libc.so.5 > /usr/obj/usr/src/i386/usr/lib/libc.so > install -C -o root -g wheel -m 444 libc_pic.a =20 > /usr/obj/usr/src/i386/usr/lib 1 error > *** Error code 2 > 1 error > *** Error code 2 > 1 error > *** Error code 2 > > I made only moderate changes to the make.conf...like my CPUBuild=3Di586. > I am in single user mode. Someone please help. I am NOT good enough to > troubleshoot this. > > > -----Original Message----- > > From: Duke, Brian > > Sent: Monday, June 16, 2003 2:57 AM > > To: 'freebsd-questions@freebsd.org' > > Subject: /usr/src/sys/dev/en/midway.c:1607: dereferencing pointer to > > incomplete type > > > > I cannot seem to rebuild my kernel. I wanted to get my sound card worki= ng > > so I included the "device pcm" directive in my kernel config and I got > > an error as below.. I could use a hand here if somone has seen this kind > > of error. > > Here is the end of the output of the failed compile > > rain# cd /usr/src > > rain# make buildkernel KERNCONF=3DRAINBUILD > > > > error: > > > > =3D=3D=3D> en > > cc -O -pipe -mcpu=3Dpentiumpro -DENABLE_BPF -D_KERNEL -Wall > > -Wredundant-decls -Wnested-externs -Wstrict-prototypes=20 > > -Wmissing-prototypes -Wpointer-arith -Winline -Wcast- qual=20 > > -fformat-extensions -std=3Dc99 -DKLD_MODULE -nostdinc -I- -I. -I@ -I@= /dev This looks like one of those problems they have been dealing with on -curre= nt.=20 They changed the -std option and I think you need to re-cvsup and start ove= r. The old rule on make.conf is that if you add something and it doesn't work.= =20 Comment it out and start over. I think you have dug a deep hole and fell in= =2E=20 I don't have any idea on the solution. Kent > > -I@/../include -fno-common -g -mno-align-long-strings > > -mpreferred-stack-boundary=3D2 -ffre estanding -Wall -Wredundant-decls > > -Wnested-externs -Wstrict-prototypes -Wmissing-prototypes > > -Wpointer-arith -Winline -Wcast-qual -fformat-extensions -std=3Dc99 -c > > /usr/ src/sys/pci/if_en_pci.c > > cc -O -pipe -mcpu=3Dpentiumpro -DENABLE_BPF -D_KERNEL -Wall > > -Wredundant-decls -Wnested-externs -Wstrict-prototypes=20 > > -Wmissing-prototypes -Wpointer-arith -Winline -Wcast- qual=20 > > -fformat-extensions -std=3Dc99 -DKLD_MODULE -nostdinc -I- -I. -I@ -I@= /dev > > -I@/../include -fno-common -g -mno-align-long-strings > > -mpreferred-stack-boundary=3D2 -ffre estanding -Wall -Wredundant-decls > > -Wnested-externs -Wstrict-prototypes -Wmissing-prototypes > > -Wpointer-arith -Winline -Wcast-qual -fformat-extensions -std=3Dc99 -c > > /usr/ src/sys/dev/en/midway.c > > /usr/src/sys/dev/en/midway.c: In function `en_get_vccs': > > /usr/src/sys/dev/en/midway.c:1474: dereferencing pointer to incomplete > > type /usr/src/sys/dev/en/midway.c:1474: dereferencing pointer to > > incomplete type /usr/src/sys/dev/en/midway.c:1479: dereferencing pointer > > to incomplete type /usr/src/sys/dev/en/midway.c:1480: dereferencing > > pointer to incomplete type /usr/src/sys/dev/en/midway.c:1488: > > dereferencing pointer to incomplete type > > /usr/src/sys/dev/en/midway.c:1492: dereferencing pointer to incomplete > > type /usr/src/sys/dev/en/midway.c:1493: dereferencing pointer to > > incomplete type /usr/src/sys/dev/en/midway.c:1493: `ATMIO_FLAG_PVC' > > undeclared (first use in this function) > > /usr/src/sys/dev/en/midway.c:1493: (Each undeclared identifier is > > reported only once /usr/src/sys/dev/en/midway.c:1493: for each function > > it appears in.) /usr/src/sys/dev/en/midway.c:1494: dereferencing pointer > > to incomplete type /usr/src/sys/dev/en/midway.c:1495: dereferencing > > pointer to incomplete type /usr/src/sys/dev/en/midway.c:1497: > > dereferencing pointer to incomplete type > > /usr/src/sys/dev/en/midway.c:1497: `ATMIO_AAL_5' undeclared (first use = in > > this function) /usr/src/sys/dev/en/midway.c:1499: dereferencing pointer > > to incomplete type /usr/src/sys/dev/en/midway.c:1499: `ATMIO_AAL_0' > > undeclared (first use in this function) > > /usr/src/sys/dev/en/midway.c:1500: dereferencing pointer to incomplete > > type> /usr/src/sys/dev/en/midway.c:1500: `ATMIO_TRAFFIC_UBR' undeclared > > (first use in this function) /usr/src/sys/dev/en/midway.c:1501: > > dereferencing pointer to incomplete type > > /usr/src/sys/dev/en/midway.c:1502: increment of pointer to unknown > > structure /usr/src/sys/dev/en/midway.c:1502: arithmetic on pointer to an > > incomplete type /usr/src/sys/dev/en/midway.c: In function `en_ioctl': > > /usr/src/sys/dev/en/midway.c:1591: `SIOCATMGETVCCS' undeclared (first u= se > > in this function) /usr/src/sys/dev/en/midway.c:1600: `SIOCATMGVCCS' > > undeclared (first use in this function) > > /usr/src/sys/dev/en/midway.c:1606: dereferencing pointer to incomplete > > type /usr/src/sys/dev/en/midway.c:1607: dereferencing pointer to > > incomplete type /usr/src/sys/dev/en/midway.c:1607: dereferencing pointer > > to incomplete type *** Error code 1 > > > > Stop in /usr/src/sys/modules/en. > > *** Error code 1 > > > > Stop in /usr/src/sys/modules. > > *** Error code 1 > > > > Stop in /usr/obj/usr/src/sys/RAINBUILD. > > *** Error code 1 > > > > Stop in /usr/src. > > *** Error code 1 > > > > Stop in /usr/src. > > rain# > > > > My FreeBSD version number > > 5.1 cvsup with new STANDARD-SUPFILE and PORTS-SUPFILE > > > > > > The contents of /var/run/dmesg/boot > > syncing disks, buffers remaining... 1 1 > > done > > Uptime: 5h20m12s > > Rebooting... > > Copyright (c) 1992-2003 The FreeBSD Project. > > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > > The Regents of the University of California. All rights reserve= d. > > FreeBSD 5.1-RELEASE #0: Thu Jun 5 02:55:42 GMT 2003 > > root@wv1u.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC > > Preloaded elf kernel "/boot/kernel/kernel" at 0xc0689000. > > Timecounter "i8254" frequency 1193182 Hz > > Timecounter "TSC" frequency 597405320 Hz > > CPU: Intel Pentium III (597.41-MHz 686-class CPU) > > Origin =3D "GenuineIntel" Id =3D 0x683 Stepping =3D 3 > > =20 > > Features=3D0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MC= A,CM > >OV,PAT,PSE36,MMX,FXSR,SSE> real memory =3D 268435456 (256 MB) > > avail memory =3D 253681664 (241 MB) > > Pentium Pro MTRR support enabled > > npx0: <math processor> on motherboard > > npx0: INT 16 interface > > pcibios: BIOS version 2.10 > > Using $PIR table, 9 entries at 0xc00ede10 > > pcib0: <Intel 82443BX (440 BX) host to PCI bridge> at pcibus 0 on > > motherboard pci0: <PCI bus> on pcib0 > > agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem > > 0x44000000-0x47ffffff at device 0.0 on pci0 pcib1: <PCIBIOS PCI-PCI > > bridge> at device 1.0 on pci0 > > pci1: <PCI bus> on pcib1 > > pci1: <display, VGA> at device 0.0 (no driver attached) > > fxp0: <Intel 82557/8/9 EtherExpress Pro/100(B) Ethernet> port > > 0x2000-0x203f mem 0x41100000-0x411fffff,0x41200000-0x41200fff irq 11 at > > device 18.0 on pci0 > > fxp0: Ethernet address 00:d0:b7:52:e2:ef > > miibus0: <MII bus> on fxp0 > > inphy0: <i82555 10/100 media interface> on miibus0 > > inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > > isab0: <PCI-ISA bridge> at device 20.0 on pci0 > > isa0: <ISA bus> on isab0 > > atapci0: <Intel PIIX4 UDMA33 controller> port 0x2060-0x206f at device > > 20.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 > > ata1: at 0x170 irq 15 on atapci0 > > uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x2040-0x205f irq > > 11 at device 20.2 on pci0 usb0: <Intel 82371AB/EB (PIIX4) USB controlle= r> > > on uhci0 > > usb0: USB revision 1.0 > > uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > > uhub0: 2 ports with 2 removable, self powered > > pci0: <bridge, PCI-unknown> at device 20.3 (no driver attached) > > orm0: <Option ROMs> at iomem > > 0xe0000-0xe7fff,0xc8000-0xc97ff,0xc0000-0xc7fff on isa0 pmtimer0 on isa0 > > atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0 > > atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 > > kbd0 at atkbd0 > > psm0: <PS/2 Mouse> irq 12 on atkbdc0 > > psm0: model Generic PS/2 mouse, device ID 0 > > fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port > > 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0> fdc0: FIFO enabled, 8 bytes > > threshold > > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > > ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 > > ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode > > ppc0: FIFO with 16/16/8 bytes threshold > > ppbus0: <Parallel port bus> on ppc0 > > plip0: <PLIP network interface> on ppbus0 > > lpt0: <Printer> on ppbus0 > > lpt0: Interrupt-driven port > > ppi0: <Parallel I/O> on ppbus0 > > sc0: <System console> at flags 0x100 on isa0 > > sc0: VGA <16 virtual consoles, flags=3D0x300> > > sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 > > sio0: type 16550A > > sio1 at port 0x2f8-0x2ff irq 3 on isa0 > > sio1: type 16550A > > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on is= a0 > > unknown: <PNP0401> can't assign resources (port) > > unknown: <PNP0501> can't assign resources (port) > > unknown: <PNP0501> can't assign resources (port) > > unknown: <PNP0700> can't assign resources (port) > > unknown: <PNP0303> can't assign resources (port) > > unknown: <PNP0f13> can't assign resources (irq) > > unknown: <PNP0c02> can't assign resources (port) > > Timecounters tick every 10.000 msec > > ad0: 9541MB <Maxtor 51024U2> [19386/16/63] at ata0-master UDMA33 > > acd0: DVD-ROM <MATSHITADVD-ROM SR-8583> at ata1-master PIO4 > > Mounting root from ufs:/dev/ad0s1a > > > > The output of "uname -a " > > > > >rain# uname -a > > >FreeBSD rain.l3.com 5.1-RELEASE FreeBSD 5.1-RELEASE #0: Thu Jun 5 > > > 02:55:42 GMT 2003 =20 > > > root@wv1u.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC i386 > > > > The kernel config file > > rain# cat /root/kernels/RAINBUILD > > # > > # GENERIC -- Generic kernel configuration file for FreeBSD/i386 > > # > > # For more information on this file, please read the handbook section on > > # Kernel Configuration Files: > > # > > # =20 > > http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-= co > >nfig.html # > > # The handbook is also available locally in /usr/share/doc/handbook > > # if you've installed the doc distribution, otherwise always see the > > # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the > > # latest information. > > # > > # An exhaustive list of options and more detailed explanations of the > > # device lines is also present in the ../../conf/NOTES and NOTES files. > > # If you are in doubt as to the purpose or necessity of a line, check > > first # in NOTES. > > # > > # $FreeBSD: src/sys/i386/conf/GENERIC,v 1.386 2003/06/08 02:03:01 > > jmallett Exp $ > > > > machine i386 > > cpu I486_CPU > > cpu I586_CPU > > cpu I686_CPU > > ident GENERIC > > > > #To statically compile in device wiring instead of /boot/device.hints > > #hints "GENERIC.hints" #Default places to look for > > devices. > > > > makeoptions DEBUG=3D-g #Build kernel with gdb(1) deb= ug > > symbols > > > > options SCHED_4BSD #4BSD scheduler > > options INET #InterNETworking > > options INET6 #IPv6 communications protocols > > options FFS #Berkeley Fast Filesystem > > options SOFTUPDATES #Enable FFS soft updates support > > options UFS_ACL #Support for access control lis= ts > > options UFS_DIRHASH #Improve performance on big > > directories options MD_ROOT #MD is a potential > > root device options NFSCLIENT #Network Filesystem > > Client options NFSSERVER #Network Filesystem Serv= er > > options NFS_ROOT #NFS usable as /, requires > > NFSCLIENT options MSDOSFS #MSDOS Filesystem > > options CD9660 #ISO 9660 Filesystem > > options PROCFS #Process filesystem (requires > > PSEUDOFS) options PSEUDOFS #Pseudo-filesystem > > framework options COMPAT_43 #Compatible with BSD > > 4.3 [KEEP THIS!] options COMPAT_FREEBSD4 #Compatible wi= th > > FreeBSD4> options SCSI_DELAY=3D15000 #Delay (in ms) befo= re > > probing SCSI options KTRACE #ktrace(1) support > > options SYSVSHM #SYSV-style shared memory > > options SYSVMSG #SYSV-style message queues > > options SYSVSEM #SYSV-style semaphores > > options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time > > extensions options KBD_INSTALL_CDEV # install a CDEV ent= ry > > in /dev options AHC_REG_PRETTY_PRINT # Print register > > bitfields in debug # output. Adds ~128k to driver. options =20 > > AHD_REG_PRETTY_PRINT # Print register bitfields in debug # output.=20 > > Adds ~215k to driver. > > > > # Debugging for use in -current > > options DDB #Enable the kernel debugger > > options INVARIANTS #Enable calls of extra sanity > > checking options INVARIANT_SUPPORT #Extra sanity checks of > > internal structures, required by INVARIANTS options WITNESS = =20 > > #Enable checks to detect deadlocks and cycles options = =20 > > WITNESS_SKIPSPIN #Don't run witness on spinlocks for speed > > > > # To make an SMP kernel, the next two are needed > > #options SMP # Symmetric MultiProcessor Kern= el > > #options APIC_IO # Symmetric (APIC) I/O > > > > device isa > > device eisa > > device pci > > device pcm > > > > # Floppy drives > > device fdc > > > > # ATA and ATAPI devices > > device ata > > device atadisk # ATA disk drives > > device atapicd # ATAPI CDROM drives > > device atapifd # ATAPI floppy drives > > device atapist # ATAPI tape drives > > options ATA_STATIC_ID #Static device numbering > > > > # SCSI Controllers > > device ahb # EISA AHA1742 family > > device ahc # AHA2940 and onboard AIC7xxx devices > > device ahd # AHA39320/29320 and onboard AIC79xx > > devices device amd # AMD 53C974 (Tekram DC-390(T)) > > device isp # Qlogic family > > device mpt # LSI-Logic MPT-Fusion > > #device ncr # NCR/Symbios Logic > > device sym # NCR/Symbios Logic (newer chipsets + > > those of `ncr') device trm # Tekram DC395U/UW/F > > DC315U adapters > > > > device adv # Advansys SCSI adapters > > device adw # Advansys wide SCSI adapters > > device aha # Adaptec 154x SCSI adapters > > device aic # Adaptec 15[012]x SCSI adapters, > > AIC-6[23]60. device bt # Buslogic/Mylex MultiMast= er > > SCSI adapters > > > > device ncv # NCR 53C500 > > device nsp # Workbit Ninja SCSI-3 > > device stg # TMC 18C30/18C50 > > > > # RAID controllers interfaced to the SCSI subsystem > > device asr # DPT SmartRAID V, VI and Adaptec SCSI > > RAID device ciss # Compaq Smart RAID 5* > > device dpt # DPT Smartcache III, IV - See NOTES for > > options! device iir # Intel Integrated RAID > > device mly # Mylex AcceleRAID/eXtremeRAID > > > > # SCSI peripherals > > device scbus # SCSI bus (required for SCSI) > > device ch # SCSI media changers > > device da # Direct Access (disks) > > device sa # Sequential Access (tape etc) > > device cd # CD > > device pass # Passthrough device (direct SCSI acces= s) > > device ses # SCSI Environmental Services (and > > SAF-TE)> > > > > # RAID controllers > > device aac # Adaptec FSA RAID > > device aacp # SCSI passthrough for aac (requires CA= M) > > device amr # AMI MegaRAID > > device ida # Compaq Smart RAID > > device ips # IBM (Adaptec) ServeRAID > > device mlx # Mylex DAC960 family > > device pst # Promise Supertrak SX6000 > > device twe # 3ware ATA RAID > > > > # atkbdc0 controls both the keyboard and the PS/2 mouse > > device atkbdc # AT keyboard controller > > device atkbd # AT keyboard > > device psm # PS/2 mouse > > > > device vga # VGA video card driver > > > > device splash # Splash screen and screen saver support > > > > # syscons is the default console driver, resembling an SCO console > > device sc > > > > # Enable this for the pcvt (VT220 compatible) console driver > > #device vt > > #options XSERVER # support for X server on a vt > > console #options FAT_CURSOR # start with block curs= or > > > > device agp # support several AGP chipsets > > > > # Floating point support - do not disable. > > device npx > > > > # Power management support (see NOTES for more options) > > #device apm > > # Add suspend/resume support for the i8254. > > device pmtimer > > > > # PCCARD (PCMCIA) support > > # Pcmcia and cardbus bridge support > > device cbb # cardbus (yenta) bridge > > #device pcic # ExCA ISA and PCI bridges > > device pccard # PC Card (16-bit) bus > > device cardbus # CardBus (32-bit) bus > > > > # Serial (COM) ports > > device sio # 8250, 16[45]50 based serial ports > > > > # Parallel port > > device ppc > > device ppbus # Parallel port bus (required) > > device lpt # Printer > > device plip # TCP/IP over parallel > > device ppi # Parallel port interface device > > #device vpo # Requires scbus and da > > > > > > # PCI Ethernet NICs. > > device de # DEC/Intel DC21x4x (``Tulip'') > > device em # Intel PRO/1000 adapter Gigabit Ethern= et > > Card device txp # 3Com 3cR990 (``Typhoon'') > > device vx # 3Com 3c590, 3c595 (``Vortex'') > > > > # PCI Ethernet NICs that use the common MII bus controller code. > > # NOTE: Be sure to keep the 'device miibus' line in order to use these > > NICs! device miibus # MII bus support > > device dc # DEC/Intel 21143 and various workalikes > > device fxp # Intel EtherExpress PRO/100B (82557, > > 82558) device pcn # AMD Am79C97x PCI 10/100 > > (precedence over 'lnc') device rl # RealTek > > 8129/8139 > > device sf # Adaptec AIC-6915 (``Starfire'') > > device sis # Silicon Integrated Systems SiS 900/SiS > > 7016 device sk # SysKonnect SK-984x and SK-982x > > gigabit ethernet device ste # Sundance ST201 (D-Li= nk > > DFE-550TX) device ti # Alteon Networks Tigon I/II > > gigabit ethernet device tl # Texas Instruments > > ThunderLAN > > device tx # SMC EtherPower II (83c170 ``EPIC'') > > device vr # VIA Rhine, Rhine II > > device wb # Winbond W89C840F > > device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'= ') > > device bge # Broadcom BCM570xx Gigabit Ethernet > > > > # ISA Ethernet NICs. pccard nics included. > > device cs # Crystal Semiconductor CS89x0 NIC > > # 'device ed' requires 'device miibus'> > > device ed # NE[12]000, SMC Ultra, 3c503, DS8390 > > cards device ex # Intel EtherExpress Pro/10 and > > Pro/10+ device ep # Etherlink III based cards > > device fe # Fujitsu MB8696x based cards > > device ie # EtherExpress 8/16, 3C507, StarLAN 10 > > etc. device lnc # NE2100, NE32-VL Lance Ethernet > > cards device sn # SMC's 9000 series of ethernet > > chips device xe # Xircom pccard ethernet > > > > # ISA devices that use the old ISA shims > > #device le > > > > # Wireless NIC cards > > device wlan # 802.11 support > > device an # Aironet 4500/4800 802.11 wireless NIC= s. > > device awi # BayStack 660 and others > > device wi # WaveLAN/Intersil/Symbol 802.11 wirele= ss > > NICs. #device wl # Older non 802.11 Wavelan wirele= ss > > NIC. > > > > # Pseudo devices - the number indicates how many units to allocate. > > device random # Entropy device > > device loop # Network loopback > > device ether # Ethernet support > > device sl # Kernel SLIP > > device ppp # Kernel PPP > > device tun # Packet tunnel. > > device pty # Pseudo-ttys (telnet etc) > > device md # Memory "disks" > > device gif # IPv6 and IPv4 tunneling > > device faith # IPv6-to-IPv4 relaying (translation) > > > > # The `bpf' device enables the Berkeley Packet Filter. > > # Be aware of the administrative consequences of enabling this! > > device bpf # Berkeley packet filter > > > > # USB support > > device uhci # UHCI PCI->USB interface > > device ohci # OHCI PCI->USB interface > > device usb # USB Bus (required) > > #device udbp # USB Double Bulk Pipe devices > > device ugen # Generic > > device uhid # "Human Interface Devices" > > device ukbd # Keyboard > > device ulpt # Printer > > device umass # Disks/Mass storage - Requires scbus a= nd > > da device ums # Mouse > > device urio # Diamond Rio 500 MP3 player > > device uscanner # Scanners > > # USB Ethernet, requires mii > > device aue # ADMtek USB ethernet > > device axe # ASIX Electronics USB ethernet > > device cue # CATC USB ethernet > > device kue # Kawasaki LSI USB ethernet > > > > # FireWire support > > device firewire # FireWire bus code > > device sbp # SCSI over FireWire (Requires scbus and > > da) device fwe # Ethernet over FireWire > > (non-standard!) rain# > > > > > > > > > > > > Brian Duke > > Level(3) Communication / TCAM > > ' (720) 888-7797 > > p (877) 461-6217 > > * brian.duke@level3.com > > =3D----=3D-=3D-=3D-=3D-=3D--=3D=3D--=3D=3D=AC > > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to > "freebsd-questions-unsubscribe@freebsd.org" =2D-=20 Kent Stewart Richland, WA http://users.owt.com/kstewart/index.html
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200306162215.36606.kstewart>