Date: Thu, 20 Apr 2000 15:50:18 -0500 From: John J Rieser <jjr@grauel.com> To: hardware@FreeBSD.ORG Subject: VScom PCI Multiport cards Message-ID: <200004202050.PAA03895@sparcmill.grauel.com>
next in thread | raw e-mail | index | archive | help
I've just loaded FreeBSD 4.0 on a HP Brio 200 (PCI bus for peripherals only). I'd love to get this AST-style ports card configured to run modems and terminals. My experience is limited to the isa version of this card, so I'm in the dark as to what the kernel needs in order to find the card/ports. SIO man page claims: device sio ## is the only thing needed in the kernel. This is supposed to be a plug and pray card..so far I'm only praying! What I've done so far... 1) Turned off appropriate things in BIOS. 2) Made new kernel including pci controller and sio device without setting ports, irqs or the like. 3) Rebooted and searched for pci~anything in dmesg. * this is all I get: ======== pcib0: <Intel 82810 (i810 GMCH) Host To Hub bridge> on motherboard pci0: <PCI bus> on pcib0 pci0: <Intel 82810 (i810 GMCH) SVGA controller> at 1.0 irq 10 pcib1: <Intel 82801AB (ICH0) Hub to PCI bridge> at device 30.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <unknown card> (vendor=0x14d2, dev=0xa003) at 14.0 irq 10 pci1: <unknown card> (vendor=0x14d2, dev=0xa000) at 14.1 irq 10 isab0: <Intel 82801AB (ICH0) PCI to LPC bridge> at device 31.0 on pci0 atapci0: <Intel ICH0 ATA33 controller> port 0x1800-0x180f at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pci0: <Intel 82801AB (ICH0) USB controller> at 31.2 irq 11 pci0: <unknown card> (vendor=0x8086, dev=0x2423) at 31.3 irq 9 chip1: <Intel 82801AB (ICH0) AC'97 Audio Controller> port 0x1840-0x187f,0x2000-0x20ff irq 9 at device 31.5 on pci0 ========= Any help in this would be greatly appreciated! John J. Rieser jjr@grauel.com PO Box 6249 Tel: (765)477-6000 \ 100 Sawmill Road x327 Lafayette, IN 47903 (800)489-4891 / To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hardware" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200004202050.PAA03895>