Date: Thu, 30 Sep 1999 11:07:48 +0200 From: Udo Schweigert <ust@cert.siemens.de> To: Michael Ranner <mranner@netway.at> Cc: Gary Jennejohn <garyj@muc.de>, freebsd-isdn@FreeBSD.ORG Subject: Re: sppp corrupts mails (was: Re: 0.82 and sendmail 8.9.3 (3.2R) Message-ID: <19990930110748.A6893@alaska.cert.siemens.de> In-Reply-To: <XFMail.990930104336.mranner@netway.at> References: <19990930095804.A6331@alaska.cert.siemens.de> <XFMail.990930104336.mranner@netway.at>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, Sep 30, 1999 at 10:43:36AM +0200, Michael Ranner wrote: > > On 30-Sep-99 Udo Schweigert wrote: > > On Thu, Sep 30, 1999 at 09:40:31AM +0200, Michael Ranner wrote: > >> > >> On 29-Sep-99 Udo Schweigert wrote: > >> > On Tue, Sep 28, 1999 at 11:37:48PM +0200, Gary Jennejohn wrote: > >> >> Michael Ranner writes: > >> >> >Facts: > >> >> > > >> >> >- E-Mails > 100k are affected nearly 100% > >> >> >- Every line in the mail could be affected > >> >> >- All the stripped lines end with "E" ?!? > >> >> > > >> >> >I had also mail contact with Per Hedeland <sendmail+per@sendmail.org> an > >> >> >he > >> >> >excludes a problem in sendmail! > >> >> > > >> >> >--- snip --- > >> >> > > >> >> >1c1 > >> >> >722c728 > >> >> >< > >> >> >V/70Dynz27OFWUmKH/HJ7NimFVL6H/icJ+AUAlgYy+j7GFmwavPKgjMhT6HVF4sDLakHGVIq6 > >> >> >lOa > >> >> >--- > >> >> >> V/70DyE > >> >> >1171c1177 > >> >> >< > >> >> >0ijJpVoCPtJItE5JspE97rlzUpPFA1G1dKHZbZqbs9VbNZHMeXG6ieDWi0cuFlabaAcozCmn/ > >> >> >z4c > >> >> >--- > >> >> >> 0ijJpVoCPtJItE5JspE97rlzE > >> >> >1620c1626 > >> >> >< > >> >> >nAlM2toOi6m2gz9gu7vZ56sedibzgy0P1JCIe0bfXwz2MF+22EsHBvfZjn13ESeZCk6OAwC2Q > >> >> >vjI > >> >> >--- > >> >> >> nAlM2toOi6m2gz9gu7vZ56sedibzgy0P1JCIe0bfXwE > >> >> > > >> >> >--- snip --- > >> >> > > >> >> > >> >> Hmmm. It almost looks like there's still a case in the Fritz!Card PCI > >> >> driver > >> >> where it's not sending whole buffers. > >> >> > >> >> There was a problem like this before, but it was noticed and fixed by two > >> >> eagle-eyed users. I think the fix is in 0.82, but I'm not 100% certain. > >> >> > >> > > >> > Yes this particular problem is fixed in 0.82, I just checked the sources. > >> > >> ------------------------------------------^^^^ > >> > >> I use 0.82 and have this problem with sppp, did you meen its fixed in 0.83? > >> (Can't compile sppp and spppcontrol under FreeBSD 3.2R) > >> > > > > No, I meant the problem Gary was speeking about is fixed in 0.82 (It was a > > problem which could have occured also with ipr, but actually only occured > > under certain circumstances with sppp; it was not a problem in sppp but in > > the > > driver itself.) > > > > Anyway: I can't reproduce your compile problems under 3.2-RELEASE. 0.82 > > definitely compiles, even the sppp part. > > 1. I have no problem to compile and run i4b-0.82 with sppp under 3.2-RELEASE > 2. I have the sendmail problem (emails >50k) under 3.2R with i4b-0.82 and sppp. > 3. I have NO sendmail problem with Brian's ppp and i4b-0.82 under 3.2R > 4. I have compile problems with i4b-0.83's sppp and spppcontrol (especially > spppcontrol) under 3.2-RELEASE (this has nothing to do with 2 and 3) > > Fact 2 and 3 let me guess there is a problem with sppp or somewhere around it, > but it seems to me that there is no problem in the Fritz! PCI driver beacause > ppp runs fine with the raw channel devices and isdnd (i4b-0.82) > OK, I understood. But I tested 0.83 with 3.2-R and sppp (Elsa QS 1000 PCI and Fritz! ISA PnP) and it compiled and worked! Regards ------------------------------------------------------------------------------- Udo Schweigert || Voice : +49 89 636 42170 Siemens AG, Siemens CERT || Fax : +49 89 636 41166 ZT IK 3 || email : Udo.Schweigert@mchp.siemens.de D-81730 Muenchen / Germany || : ust@cert.siemens.de PGP fingerprint || 2A 53 F6 A6 30 59 64 02 6B C4 E0 73 B2 C9 6C E7 ------------------------------------------------------------------------------- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isdn" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19990930110748.A6893>