Date: Wed, 1 Mar 2000 14:30:42 +0100 (MET) From: Martin Dieringer <dieringe@physik.fu-berlin.de> To: Michael Lucas <mwlucas@blackhelicopters.org> Cc: mobile@FreeBSD.ORG Subject: Re: help with ppc and 4.0 on thinkpad 600? Message-ID: <Pine.OSF.4.10.10003011427270.5853-100000@sirius.physik.fu-berlin.de> In-Reply-To: <200003011238.HAA31777@blackhelicopters.org>
next in thread | previous in thread | raw e-mail | index | archive | help
I now "solved" the problem by setting the parallel port to lpt2 with the thinkpad-config-tool and get ppc0 at 0x378 working very well. nonetheless I would rather use the usb-port if it worked... martin On Wed, 1 Mar 2000, Michael Lucas wrote: > Hello, > > If you're using the lpt driver straight from GENERIC, it's set up for > networking, not for printing. Changes in documentation were committed > just last night. > > Not sure which either looks like, though, as I don't use my parallel > port at all. But you might check. > > ==ml > > > > > Hi > > since I upgraded to 4.0, I can't use my parallel port any more > > (on a Thinkpad 600). It says > > ppc0: cannot reserve I/O port range > > > > the kernel config I use is > > device ppc0 at isa? port? irq 7 > > device ppbus > > device lpt > > > > on 3.4 it was usable with > > ppc0 at 0x3bc irq7 on isa > > Generic chipset (NIBBLE-only) in COMPATIBLE mode > > > > anybody knows what's wrong? > > > > is the usb-printer-interface working already? I can't get anything to > > my printer via ulpt0. > > > > thanks > > martin > > > > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-mobile" in the body of the message > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-mobile" in the body of the message > _____________________________________________________________________ Martin Dieringer mailto:dieringe@zedat.fu-berlin.de Moeckernstr. 76 http://userpage.fu-berlin.de/~dieringe/ 10965 Berlin Tel.: 030 / 78 99 21 99 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.OSF.4.10.10003011427270.5853-100000>