Date: Wed, 7 Mar 2007 21:26:40 +0000 From: ian j hart <ianjhart@ntlworld.com> To: freebsd-stable@freebsd.org Cc: stable@freebsd.org, Artem Kuchin <matrix@itlegion.ru> Subject: Re: Is SATA II supported in 6.2-stable? Message-ID: <200703072126.40143.ianjhart@ntlworld.com> In-Reply-To: <00e001c75fe2$0f3f4200$0c00a8c0@Artem> References: <20070227205351.GA72597@ravenloft.kiev.ua> <45ED35F2.9080505@tomjudge.com> <00e001c75fe2$0f3f4200$0c00a8c0@Artem>
next in thread | previous in thread | raw e-mail | index | archive | help
On Tuesday 06 March 2007 11:06, Artem Kuchin wrote: > Hi! > > I just setup a new machine and while it is supposed to be full SATA II i > still see these lines in at kernel init: > > Mar 6 14:00:09 aaa kernel: ad8: 305245MB <Seagate ST3320620AS 3.AAE> at > ata4-master SATA150 Mar 6 14:00:09 aaa kernel: ad10: 305245MB <Seagate > ST3320620AS 3.AAE> at ata5-master SATA150 IIRC those drives ship jumpered down to SATA150. Worth checking. > > As you see, it says SATA150 , while the drives are SATA II (which is, as i > understand, SATA 300). > > Both drives are connected to RAID controller and form a mirror raid: > > Mar 6 14:00:09 aaa kernel: ar0: 305108MB <LSILogic v3 MegaRAID RAID1> > status: READY Mar 6 14:00:09 aaa kernel: ar0: disk0 READY (master) using > ad8 at ata4-master Mar 6 14:00:09 aaa kernel: ar0: disk1 READY (mirror) > using ad10 at ata5-master > > Any idea how to make it work as SATA II? > > -- > Regards, > Artem > > _______________________________________________ > freebsd-stable@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-stable > To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org" -- ian j hart
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200703072126.40143.ianjhart>