Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 21 Aug 2000 08:26:55 -0400 (EDT)
From:      Michael Lucas <mwlucas@blackhelicopters.org>
To:        mobile@freebsd.org
Subject:   Yamaha sound chip on -current
Message-ID:  <200008211226.IAA95625@blackhelicopters.org>

next in thread | raw e-mail | index | archive | help
Okay, I give up. After much puttering, I simply can't make the Yamaha
OPL-3 in my Toshiba laptop speak.  I can't even get it recognized on
boot.

My kernel config contains

device	pcm

I'm running -current, and this worked up until the recent config
changes.  Obviously something changed there, but I can't find it.
I've been through the mailing lists, can't find a dang thing.  My
dmesg follows.  Help?  Please?

==ml

Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #0: Mon Aug 14 10:52:14 EDT 2000
    mwlucas@moneysink.exceptionet.com:/usr/obj/usr/src/sys/PETULANCE
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (266.62-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x652  Stepping = 2
  Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PA
T,PSE36,MMX,FXSR>
real memory  = 167706624 (163776K bytes)
avail memory = 160391168 (156632K bytes)
Preloaded elf kernel "kernel" at 0xc02a8000.
Preloaded elf module "randomdev.ko" at 0xc02a809c.
Pentium Pro MTRR support enabled
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX host to PCI bridge (AGP disabled)> on motherboard
pci0: <PCI bus> on pcib0
pci0: <Intel 82443BX host to PCI bridge (AGP disabled)> at 0.0
pcic-pci0: <Toshiba ToPIC97 PCI-CardBus Bridge> at device 2.0 on pci0
pcic-pci1: <Toshiba ToPIC97 PCI-CardBus Bridge> at device 2.1 on pci0
pci0: <Chips & Technologies 65555 SVGA controller> at 4.0
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xfe60-0xfe6f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 7.2 irq 11
pci0: <Intel 82371AB Power management controller> at 7.3
pci0: <Toshiba Fast Infra Red controller> at 10.0 irq 11
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model GlidePoint, device ID 0
fdc0: <NEC 765 or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
pcic0: <Intel i82365> at port 0x3e0-0x3e1 on isa0
pcic0: Polling mode
pcic-pci0: <Toshiba ToPIC97 PCI-CardBus Bridge> at device 2.0 on pci0
pcic-pci1: <Toshiba ToPIC97 PCI-CardBus Bridge> at device 2.1 on pci0
pci0: <Chips & Technologies 65555 SVGA controller> at 4.0
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xfe60-0xfe6f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 7.2 irq 11
pci0: <Intel 82371AB Power management controller> at 7.3
pci0: <Toshiba Fast Infra Red controller> at 10.0 irq 11
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model GlidePoint, device ID 0
fdc0: <NEC 765 or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
pcic0: <Intel i82365> at port 0x3e0-0x3e1 on isa0
pcic0: Polling mode
pccard0: <PC Card bus -- kludge version> on pcic0
pccard1: <PC Card bus -- kludge version> on pcic0
ppc0: parallel port not found.
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources
unknown: <PNP0f13> can't assign resources
unknown: <PNP0700> can't assign resources
unknown: <PNP0501> can't assign resources
unknown: <PNP0e03> can't assign resources
IP Filter: v3.4.9 initialized.  Default = pass all, Logging = enabled
pccard: card inserted, slot 0
pccard: card inserted, slot 1
ata1-slave: ata_command: timeout waiting for intr
ata1-slave: identify failed
ad0: 4126MB <IBM-DKLA-24320> [8944/15/63] at ata0-master using UDMA33
acd0: CDROM <CD-224E> at ata1-master using WDMA2
Mounting root from ufs:/dev/ad0s1a



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200008211226.IAA95625>