Date: Mon, 26 Mar 2007 11:40:26 GMT From: Meyer<eng@prowip.net.br> To: freebsd-gnats-submit@FreeBSD.org Subject: kern/110849: Tyan U320 onboard (ahd) problem with more than 3 disks Message-ID: <200703261140.l2QBeQeN013630@www.freebsd.org> Resent-Message-ID: <200703261150.l2QBo6tp059009@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 110849 >Category: kern >Synopsis: Tyan U320 onboard (ahd) problem with more than 3 disks >Confidential: no >Severity: serious >Priority: high >Responsible: freebsd-bugs >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Mon Mar 26 11:50:06 GMT 2007 >Closed-Date: >Last-Modified: >Originator: Meyer >Release: 6.2-Releng6 amd64 >Organization: Prowip >Environment: FreeBSD gw.prowip.net.br 6.2-STABLE FreeBSD 6.2-STABLE #0: Thu Mar 15 19:51:11 BRT 2007 m@gw.prowip.net.br:/usr/obj/usr/src/sys/wco amd64 >Description: I get a SCSI error when more than 2 disks are attached to the same bus one or two disks do not produce the erro I get the same error on Tyan MBs with Adaptec U320 onboard, in this case the K8SD-Pro and K8SR. Both MBs are with the latest BIOS version, at least the one I found on your website I boot wiht RH-FC6 and no problem Tyan's support argues that it is a driver problem Appearently, after boot, the system works and all disks are usable but I still have no load and I only tested with dd-ing some large files without problem I changed cables and disks to be sure there is no issue with any of them. M Waiting 10 seconds for SCSI devices to settle ahd0: Invalid Sequencer interrupt occurred. >How-To-Repeat: >Fix: >Release-Note: >Audit-Trail: >Unformatted: >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< ahd0: Dumping Card State at program address 0x23c Mode 0x0 Card was paused INTSTAT[0x0] SELOID[0x2] SELID[0x10] HS_MAILBOX[0x0] INTCTL[0x80] SEQINTSTAT[0x0] SAVED_MODE[0x11] DFFSTAT[0x33] SCSISIGI[0x0] SCSIPHASE[0x0] SCSIBUS[0x0] LASTPHASE[0x1] SCSISEQ0[0x0] SCSISEQ1[0x12] SEQCTL0[0x0] SEQINTCTL[0x6] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0] QFREEZE_COUNT[0x3] KERNEL_QFREEZE_COUNT[0x3] MK_MESSAGE_SCB[0xff00] MK_MESSAGE_SCSIID[0xff] SSTAT0[0x0] SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0] SIMODE1[0xa4] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0] SCB Count = 16 CMDS_PENDING = 0 LASTSCB 0xffff CURRSCB 0xd NEXTSCB 0xff00 qinstart = 36 qinfifonext = 37 QINFIFO: 0xf WAITING_TID_QUEUES: Pending list: 15 FIFO_USE[0x0] SCB_CONTROL[0x48] SCB_SCSIID[0x7] Total 1 Kernel Free SCB list: 14 13 1 2 3 4 5 6 7 8 9 10 11 12 0 Sequencer Complete DMA-inprog list: Sequencer Complete list: Sequencer DMA-Up and Complete list: Sequencer On QFreeze and Complete list: ahd0: FIFO0 Free, LONGJMP == 0x8000, SCB 0xe SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89] SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10] ahd0: FIFO1 Free, LONGJMP == 0x8063, SCB 0xd SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89] SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10] LQIN: 0x8 0x0 0x0 0xe 0x0 0x1 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 ahd0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x42 ahd0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x1 ahd0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0 SIMODE0[0xc] CCSCBCTL[0x0] ahd0: REG0 == 0x7ffd, SINDEX = 0x10e, DINDEX = 0x106 ahd0: SCBPTR == 0xe, SCB_NEXT == 0xff00, SCB_NEXT2 == 0xd CDB 12 20 0 80 8 25 STACK: 0x237 0x2 0x0 0x0 0x0 0x0 0x0 0x0 <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>> SMP: AP CPU #2 Launched! SMP: AP CPU #3 Launched! SMP: AP CPU #1 Launched! Copied 18 bytes of sense data offset 12: 0x70 0x0 0x6 0x0 0x0 0x0 0x0 0xa 0x0 0x0 0x0 0x0 0x29 0x2 0x0 0x0 0x0 0x0 Copied 18 bytes of sense data offset 12: 0x70 0x0 0x6 0x0 0x0 0x0 0x0 0xa 0x0 0x0 0x0 0x0 0x29 0x2 0x2 0x0 0x0 0x0 Copied 18 bytes of sense data offset 12: 0x70 0x0 0x6 0x0 0x0 0x0 0x0 0xa 0x0 0x0 0x0 0x0 0x29 0x2 0x2 0x0 0x0 0x0 da0 at ahd0 bus 0 target 0 lun 0 da0: <MAXTOR ATLAS15K2_36WLS JNZH> Fixed Direct Access SCSI-3 device da0: 320.000MB/s transfers (160.000MHz, offset 127, 16bit), Tagged Queueing Enabled da0: 35074MB (71833096 512 byte sectors: 255H 63S/T 4471C) da1 at ahd0 bus 0 target 1 lun 0 da1: <SEAGATE ST373207LW 0005> Fixed Direct Access SCSI-3 device da1: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged Queueing Enabled da1: 70007MB (143374744 512 byte sectors: 255H 63S/T 8924C) da2 at ahd0 bus 0 target 2 lun 0 da2: <SEAGATE ST373207LW 0005> Fixed Direct Access SCSI-3 device da2: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged Queueing Enabled da2: 70007MB (143374744 512 byte sectors: 255H 63S/T 8924C) Trying to mount root from ufs:/dev/da0s1a
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200703261140.l2QBeQeN013630>