Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 5 Aug 2010 01:21:52 -0500 (CDT)
From:      Scott Bennett <bennett@cs.niu.edu>
To:        jerrymc@msu.edu
Cc:        freebsd-questions@freebsd.org
Subject:   Re: looking for a buildable version of OpenOffice.org
Message-ID:  <201008050621.o756Lqft000777@mp.cs.niu.edu>

next in thread | raw e-mail | index | archive | help
     On Wed, 4 Aug 2010 09:59:52 -0400 Jerry McAllister <jerrymc@msu.edu>
wrote:
>On Wed, Aug 04, 2010 at 02:00:00AM -0500, Scott Bennett wrote:
>
>>      I have tried all of the versions of OpenOffice.org that are currently
>> in the ports tree on a 7.3-STABLE system, and all of them fail to build to
>> completion.  Is there somewhere that I can find one that actually works?
>> Or at least some alternative package that will build and work on a FreeBSD
>> 7.3-STABLE system?  No packages appear to be available for these ports.
>> (Transcripts of the failed builds are available on request.)
>>      And what would be available if I were to upgrade my system to 8.1-STABLE?
>>      Thanks in advance for any help!
>
>You didn't give any information on what the failures were.
>
     True enough.  That's because I wasn't really looking for help in fixing
the broken ports, but rather for an OOo port that is *not* broken.
     However, here are some abbreviated descriptions of the build failures in
case someone cares to pursue them or sees some obvious fix to apply.  Blank
lines have been deleted from the output excerpts below in order to shorten this
message.

editors/openoffice.org-2:

===>>> All dependencies are up to date
===>  Cleaning for openoffice.org-2.4.3_2
===>  openoffice.org-2.4.3_2 has known vulnerabilities:
=> openoffice.org -- multiple vulnerabilities.
   Reference: <http://portaudit.FreeBSD.org/c97d7a37-2233-11df-96dd-001b2134ef46.html>;
=> Please update your ports tree and try again.
*** Error code 1
Stop in /usr/ports/editors/openoffice.org-2.
===>>> make failed for editors/openoffice.org-2
===>>> Aborting update

[N.B.  the ports tree was very much up to date at the time.  SB]


editors/openoffice.org-3-RC:

Entering /backups/w/misc/work/usr/ports/editors/openoffice.org-3-RC/work/OOO330_m1/drawinglayer/source/texture
Entering /backups/w/misc/work/usr/ports/editors/openoffice.org-3-RC/work/OOO330_m1/drawinglayer/source/primitive3d
Entering /backups/w/misc/work/usr/ports/editors/openoffice.org-3-RC/work/OOO330_m1/slideshow/util
slideshow deliver
Entering /backups/w/misc/work/usr/ports/editors/openoffice.org-3-RC/work/OOO330_m1/drawinglayer/util
drawinglayer deliver
1 module(s):
        nss
need(s) to be rebuilt
Reason(s):
ERROR: error 65280 occurred while making /backups/w/misc/work/usr/ports/editors/openoffice.org-3-RC/work/OOO330_m1/nss
Attention: if you fix the errors in above module(s) you may prolongue your the build issuing command:
        build --all:nss
*** Error code 1
Stop in /usr/ports/editors/openoffice.org-3-RC.
===>>> make failed for editors/openoffice.org-3-RC
===>>> Aborting update


editors/openoffice.org-3-devel:

Entering /backups/w/misc/work/usr/ports/editors/openoffice.org-3-devel/work/DEV300_m85/drawinglayer/source/texture
Entering /backups/w/misc/work/usr/ports/editors/openoffice.org-3-devel/work/DEV300_m85/drawinglayer/source/geometry
Entering /backups/w/misc/work/usr/ports/editors/openoffice.org-3-devel/work/DEV300_m85/slideshow/util
Entering /backups/w/misc/work/usr/ports/editors/openoffice.org-3-devel/work/DEV300_m85/drawinglayer/util
drawinglayer deliver
slideshow deliver
1 module(s):
        nss
need(s) to be rebuilt
Reason(s):
ERROR: error 65280 occurred while making /backups/w/misc/work/usr/ports/editors/openoffice.org-3-devel/work/DEV300_m85/nss
Attention: if you fix the errors in above module(s) you may prolongue your the build issuing command:
        build --all:nss
*** Error code 1
Stop in /usr/ports/editors/openoffice.org-3-devel.
===>>> make failed for editors/openoffice.org-3-devel
===>>> Aborting update


editors/openoffice.org-3:

Checking DLL ../unxfbsdi.pro/lib/check_slideshow.uno.so ...-rwxr-xr-x  1 root  wheel  6559304 Jul 31 04:03 ../unxfbsdi.pro/lib/slideshow.uno.so
-----------------------------
SHL2FILTERFILE not set!
-----------------------------
dummy file to keep the dependencies for later use.
------------------------------
Making: ../unxfbsdi.pro/lib/libslideshowtestfi.so

[A line link-editing something called
../unxfbsdi.pro/lib/libslideshowtestfi.so
was too long for vi here, so I've omitted it.  SB]

rm -f ../unxfbsdi.pro/lib/check_libslideshowtestfi.so
mv ../unxfbsdi.pro/lib/libslideshowtestfi.so ../unxfbsdi.pro/lib/check_libslideshowtestfi.so
/backups/w/misc/work/usr/ports/editors/openoffice.org-3/work/OOO320_m19/solenv/bin/checkdll.sh -L../unxfbsdi.pro/lib -L/backups/w/misc/work/usr/ports/editors/openoffice.org-3/work/OOO320_m19/solver/320/unxfbsdi.pro/lib  ../unxfbsdi.pro/lib/check_libslideshowtestfi.so
Checking DLL ../unxfbsdi.pro/lib/check_libslideshowtestfi.so ...-rwxr-xr-x  1 root  wheel  6963499 Jul 31 04:03 ../unxfbsdi.pro/lib/libslideshowtestfi.so
-------------
Running processes: 0
Name "main::name" used only once: possible typo at /backups/w/misc/work/usr/ports/editors/openoffice.org-3/work/OOO320_m19/solenv/bin/deliver.pl line 1312.
deliver -- version: -
Module 'slideshow' delivered successfully. 2 files copied, 2 files unchanged
2 module(s):
        nss
        openssl
need(s) to be rebuilt
Reason(s):
ERROR: error 65280 occurred while making /backups/w/misc/work/usr/ports/editors/openoffice.org-3/work/OOO320_m19/nss/
ERROR: error 65280 occurred while making /backups/w/misc/work/usr/ports/editors/openoffice.org-3/work/OOO320_m19/openssl/
Attention: if you build and deliver the above module(s) you may prolongue your the build issuing command "build --from nss openssl"
rmdir /tmp/NnlQ9YQZ77
*** Error code 1
Stop in /usr/ports/editors/openoffice.org-3.
===>>> make failed for editors/openoffice.org-3
===>>> Aborting update



     Note, too, that I was unable to find any program or script by the name
of "build".
     And now to return to my questions:  is there somewhere that I can find
one that actually works?  Or at least some alternative package that will
build and work on a FreeBSD 7.3-STABLE system?
     Thanks for the responses thus far, and thanks in advance for answers to
the above questions!


                                  Scott Bennett, Comm. ASMELG, CFIAG
**********************************************************************
* Internet:       bennett at cs.niu.edu                              *
*--------------------------------------------------------------------*
* "A well regulated and disciplined militia, is at all times a good  *
* objection to the introduction of that bane of all free governments *
* -- a standing army."                                               *
*    -- Gov. John Hancock, New York Journal, 28 January 1790         *
**********************************************************************



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201008050621.o756Lqft000777>