Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 28 Apr 2008 11:07:09 GMT
From:      FreeBSD bugmaster <bugmaster@FreeBSD.org>
To:        freebsd-scsi@FreeBSD.org
Subject:   Current problem reports assigned to freebsd-scsi@FreeBSD.org
Message-ID:  <200804281107.m3SB79RG056255@freefall.freebsd.org>

next in thread | raw e-mail | index | archive | help
Current FreeBSD problem reports
Critical problems
Serious problems

S Tracker      Resp.      Description
--------------------------------------------------------------------------------
o kern/39388   scsi       ncr/sym drivers fail with 53c810 and more than 256MB m
o kern/40895   scsi       wierd kernel / device driver bug
o kern/52638   scsi       [panic] SCSI U320 on SMP server won't run faster than 
s kern/57398   scsi       [mly] Current fails to install on mly(4) based RAID di
o kern/60598   scsi       wire down of scsi devices conflicts with config
o kern/60641   scsi       [sym] Sporadic SCSI bus resets with 53C810 under load
s kern/61165   scsi       [panic] kernel page fault after calling cam_send_ccb
o kern/74627   scsi       [ahc] [hang] Adaptec 2940U2W Can't boot 5.3
o kern/90282   scsi       [sym] SCSI bus resets cause loss of ch device
o kern/92798   scsi       [ahc] SCSI problem with timeouts
o kern/94838   scsi       Kernel panic while mounting SD card with lock switch o
o kern/99954   scsi       [ahc] reading from DVD failes on 6.x (regression)
o kern/110847  scsi       [ahd] Tyan U320 onboard problem with more than 3 disks
o kern/120247  scsi       [mpt] FreeBSD 6.3 and LSI Logic 1030 = only 3.300MB/s 

14 problems total.

Non-critical problems

S Tracker      Resp.      Description
--------------------------------------------------------------------------------
o kern/35234   scsi       World access to /dev/pass? (for scanner) requires acce
o kern/38828   scsi       [dpt] [request] DPT PM2012B/90 doesn't work
o kern/44587   scsi       dev/dpt/dpt.h is missing defines required for DPT_HAND
o kern/76178   scsi       [ahd] Problem with ahd and large SCSI Raid system
o kern/114597  scsi       [sym] System hangs at SCSI bus reset with dual HBAs
o kern/119668  scsi       [cam] [patch] certain errors are too verbose comparing
o kern/120487  scsi       [sg] scsi_sg incompatible with scanners
o sparc/121676 scsi       [iscsi] iscontrol do not connect iscsi-target on sparc

8 problems total.




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200804281107.m3SB79RG056255>