Date: Sun, 03 Feb 2008 01:23:03 +0200 From: Alexander Motin <mav@FreeBSD.org> To: Reinhold <freebsd@violetlan.net> Cc: freebsd-questions@freebsd.org Subject: Re: mpd with a dual pppoe setup Message-ID: <47A4FB57.40203@FreeBSD.org> In-Reply-To: <1201922586.00019085.1201909804@10.7.7.3> References: <1201922586.00019085.1201909804@10.7.7.3>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi. Reinhold wrote: > Here is what I've done so far. > /usr/local/etc/mpd5/mpd.conf The config you have made probably suits to mpd3/4, but not to mpd5. Mpd5 uses alike commands, but general configuration idea is different. There is no mpd.links file in mpd5. Read new examples present in package. > default: > load wan1 > load wan2 Then it would be reasonable to merge "pptpd:" section here. > set ipcp ranges static-ip-0/32 isp-gateway-0/32 If you are connecting to the ISP it would be better not to specify IP to let them be negotiated. > load common_setting > > wan2: > new -i ng1 wan2 PPPoE1 > set iface route default > set iface up-script /usr/local/etc/mpd/script-wan2.sh > set iface down-script /usr/local/etc/mpd/script-wan2.sh > > set bundle authname "username1@provider" > set bundle password "passwd" > > set ipcp ranges static-ip-1/32 isp-gateway-1/32 > load common_setting > > common_setting: > set iface addrs 1.1.1.1 2.2.2.2 > set iface disable on-demand Without "on-demand" "set iface addrs" is useless. > set iface idle 0 This is default. > # PPTP > pt0: > set link type pptp > set pptp enable incoming > set pptp disable originate > set pptp disable windowing > set pptp self 127.0.0.1 It will be difficult to accept incoming while listening on 127.0.0.1. -- Alexander Motin
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?47A4FB57.40203>