Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 02 Mar 2012 07:18:39 -0500
From:      sean <tech.junk@myfairpoint.net>
To:        freebsd-questions@freebsd.org
Subject:   Re: USB Logitech QuickCam Ultra Vision
Message-ID:  <4F50BA9F.3040502@myfairpoint.net>
In-Reply-To: <4F50139F.6050203@herveybayaustralia.com.au>
References:  <4F4FDB25.5020400@myfairpoint.net> <4F50139F.6050203@herveybayaustralia.com.au>

Next in thread | Previous in thread | Raw E-Mail | Index | Archive | Help
On 03/01/12 19:26, Da Rock wrote:
> Which mixer? Check `ls /dev/mixer*`, and use `mixer -f 
> /dev/mixer<whatever numbers show up in previous cmd`.

I did not realize there was more than one mixer.
Anyway, here are my results to the commands above.
tardis# ls /dev/mixer*
/dev/mixer0     /dev/mixer1
tardis# mixer
Mixer vol      is currently set to  91:91
Mixer pcm      is currently set to  97:97
Mixer line     is currently set to  75:75
Mixer mic      is currently set to  97:97
Mixer cd       is currently set to  91:91
Mixer rec      is currently set to 100:100
Mixer igain    is currently set to   0:0
Mixer ogain    is currently set to  50:50
Mixer line1    is currently set to  75:75
Mixer phin     is currently set to   0:0
Mixer phout    is currently set to   0:0
Recording source: mic
tardis# mixer1
mixer1: Command not found.
tardis# mixer -f /dev/mixer
Mixer vol      is currently set to  91:91
Mixer pcm      is currently set to  97:97
Mixer line     is currently set to  75:75
Mixer mic      is currently set to  97:97
Mixer cd       is currently set to  91:91
Mixer rec      is currently set to 100:100
Mixer igain    is currently set to   0:0
Mixer ogain    is currently set to  50:50
Mixer line1    is currently set to  75:75
Mixer phin     is currently set to   0:0
Mixer phout    is currently set to   0:0
Recording source: mic




Want to link to this message? Use this URL: <http://docs.FreeBSD.org/cgi/mid.cgi?4F50BA9F.3040502>