Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 14 Jan 2013 13:36:39 +0100
From:      Dani <>
Subject:   driver mps - SCSI sense: ILLEGAL REQUEST (Logical block address out of range)
Message-ID:  <>

Next in thread | Raw E-Mail | Index | Archive | Help
Hi all,

I have installed FreeBSD 9.1 on Dell PowerEdge r720. This server is
connected to the storage array Dell PowerVault MD3200 using SAS cables. I
have created a ZFS pool with the SAS disks (Dell PowerVault MD3200) and can
perform read/write operations in the pool without problems. However, when I
export the pool and then import it, the following errors are showed:

(da24:mps0:0:3:31): Field Replaceable Unit: 5
(da24:mps0:0:3:31): Error 22, Unretryable error
(da24:mps0:0:3:31): READ(10). CDB: 28 0 0 0 0 0 0 1 0 0
(da24:mps0:0:3:31): CAM status: SCSI Status Error
(da24:mps0:0:3:19): SCSI status: Check Condition
(da24:mps0:0:3:31): SCSI sense: ILLEGLA REQUEST asc:21,0 (Logical block
address out of range)

The device da24 is an access device to the storage array:

da24 at mps0 bus 0 scbus0 target 3 lun 31
da24: <DELL Universal Xport 0780> Fixed Direct Access SCSI-5 device
da24: 600.000MB/s transfers
da24: Command Queueing enabled
da24: 20MB (40960 512 byte sectors: 64H 32S/T 20C)

#zpool status
pool: pool0
state: ONLINE
scan: none requested

              NAME              STATE              READ              WRITE
              pool0                ONLINE                    0
        0                       0
                 mirror-0          ONLINE                    0
        0                       0
                     da0            ONLINE                    0
        0                       0
                     da1            ONLINE                    0
        0                       0
                     da2            AVAIL

errores: No known data errorsless

# diskinfo -v da0
512   #sectorsize
999665448960   # mediasize in bytes (931G)
1952471580      # mediasize in sectors
0                      # stripesize
0                      # stripeoffset
121535             # Cylinders according to firmware.
255                  # Heads according to firmware.
63                    # Sectors according to firmware
2AH000O         # Disk ident.

Why are those errors produced? Are they relevant? Can they be omitted?

Thanks. Regards.

Want to link to this message? Use this URL: <>