Date: Fri, 17 Dec 2004 13:31:22 +0100 (CET) From: "Walter C. Pelissero" <wcp@pelissero.de> To: FreeBSD-gnats-submit@FreeBSD.org Subject: kern/75185: ACPI doesn't power off Tyan S2460 Message-ID: <200412171231.iBHCVMFn031399@big-thought.home.loc> Resent-Message-ID: <200412171250.iBHCoMYJ033471@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 75185
>Category: kern
>Synopsis: ACPI doesn't power off Tyan S2460
>Confidential: no
>Severity: non-critical
>Priority: low
>Responsible: freebsd-bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Fri Dec 17 12:50:22 GMT 2004
>Closed-Date:
>Last-Modified:
>Originator: Walter C. Pelissero
>Release: FreeBSD 5.3-STABLE i386
>Organization:
>Environment:
System: FreeBSD big-thought.home.loc 5.3-STABLE FreeBSD 5.3-STABLE #1: Tue Dec 14 18:20:59 CET 2004 wcp@big-thought.home.loc:/usr/src/sys/i386/compile/TYAN-TIGER-MP i386
>Description:
On a Tyan Tiger MP (S2460, BIOS v1.05) shutdown -p goes
through the usual procedure but when it comes to turn the
power off, only the video switches off; SCSI disks and fans
are kept running and the SCSI bus lights are steady on as if
during POST. In that status the computer stays frozen without
reacting even to the power button.
Below the boot log:
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.3-STABLE #1: Tue Dec 14 18:20:59 CET 2004
wcp@big-thought.home.loc:/usr/src/sys/i386/compile/TYAN-TIGER-MP
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) Processor (1666.74-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x681 Stepping = 1
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
AMD Features=0xc0480000<MP,AMIE,DSP,3DNow!>
real memory = 1073676288 (1023 MB)
avail memory = 1041088512 (992 MB)
ACPI APIC Table: <PTLTD APIC >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 1
cpu1 (AP): APIC ID: 0
ACPI: overriding DSDT/SSDT with custom table
ACPI-0374: *** Info: Table [DSDT] replaced by host OS
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0 <Version 1.1> irqs 0-23 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <PTLTD RSDT> on motherboard
acpi0: Power Button (fixed)
acpi0: Sleep Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0x8080-0x80ff,0x8000-0x807f,0xcf8-0xcff iomem 0xdc000-0xdffff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <AMD 762 host to AGP bridge> port 0x1c10-0x1c13 mem 0xf4220000-0xf4220fff,0xf8000000-0xfbffffff at device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <AMD 766 UDMA100 controller> port 0xf000-0xf00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
ohci0: <AMD-766 USB Controller> mem 0xdc000-0xdcfff irq 19 at device 7.4 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <AMD-766 USB Controller> on ohci0
usb0: USB revision 1.0
uhub0: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
uhub1: ALCOR Generic USB Hub, class 9/0, rev 1.10/3.12, addr 2
uhub1: 4 ports with 4 removable, bus powered
ahc0: <Adaptec 29160 Ultra160 SCSI adapter> port 0x1000-0x10ff mem 0xf4001000-0xf4001fff irq 16 at device 8.0 on pci0
ahc0: [GIANT-LOCKED]
aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
ahc1: <Adaptec 2940 SCSI adapter> port 0x1400-0x14ff mem 0xf4002000-0xf4002fff irq 18 at device 10.0 on pci0
ahc1: [GIANT-LOCKED]
aic7870: Single Channel A, SCSI Id=7, 16/253 SCBs
pci0: <display, VGA> at device 12.0 (no driver attached)
sis0: <NatSemi DP8381[56] 10/100BaseTX> port 0x1800-0x18ff mem 0xf4003000-0xf4003fff irq 17 at device 13.0 on pci0
sis0: Silicon Revision: DP83816A
miibus0: <MII bus> on sis0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sis0: Ethernet address: 00:09:5b:1f:09:3c
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0: <ECP parallel printer port> port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xe0000-0xe3fff,0xcd800-0xcdfff,0xc0000-0xc7fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
acd0: CDROM <CRD-8322B/1.02> at ata0-master PIO4
acd1: DVDR <TEAC DV-W50D/1.06> at ata1-master UDMA33
Waiting 2 seconds for SCSI devices to settle
da0 at ahc0 bus 0 target 0 lun 0
da0: <QUANTUM ATLAS_V__9_WLS 0230> Fixed Direct Access SCSI-3 device
da0: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da0: 8755MB (17930694 512 byte sectors: 255H 63S/T 1116C)
da1 at ahc0 bus 0 target 1 lun 0
da1: <FUJITSU M2954S-512 0122> Fixed Direct Access SCSI-2 device
da1: 20.000MB/s transfers (20.000MHz, offset 15), Tagged Queueing Enabled
da1: 4149MB (8498506 512 byte sectors: 255H 63S/T 529C)
da2 at ahc0 bus 0 target 2 lun 0
da2: <QUANTUM FIREBALL ST4.3S 0F0C> Fixed Direct Access SCSI-2 device
da2: 20.000MB/s transfers (20.000MHz, offset 15), Tagged Queueing Enabled
da2: 4136MB (8471232 512 byte sectors: 255H 63S/T 527C)
da3 at ahc0 bus 0 target 5 lun 0
da3: <QUANTUM FIREBALL ST4.3S 0F0C> Fixed Direct Access SCSI-2 device
da3: 20.000MB/s transfers (20.000MHz, offset 15), Tagged Queueing Enabled
da3: 4136MB (8471232 512 byte sectors: 255H 63S/T 527C)
SMP: AP CPU #1 Launched!
cd0 at ata0 bus 0 target 0 lun 0
cd0: <LG CD-ROM CRD-8322B 1.02> Removable CD-ROM SCSI-0 device
cd0: 16.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
cd1 at ata1 bus 0 target 0 lun 0
cd1: <TEAC DV-W50D 1.06> Removable CD-ROM SCSI-0 device
cd1: 33.000MB/s transfers
cd1: Attempt to query device size failed: NOT READY, Medium not present
GEOM_STRIPE: Device home created (id=1262514290).
GEOM_STRIPE: Disk da2 attached to home.
GEOM_STRIPE: Disk da3 attached to home.
GEOM_STRIPE: Device home activated.
Mounting root from ufs:/dev/da0s1a
(In case you are worrying about the "overriding DSDT/SSDT with
custom table" message, please note that the problem is the
same with the original DSDT. The new DSDT just fixes a couple
of undefined references.)
>How-To-Repeat:
shutdown -p on a Tyan Tiger MP (S2460) with two Athlon processors
>Fix:
No one known. To power off the machine you must first press
the reset button.
>Release-Note:
>Audit-Trail:
>Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200412171231.iBHCVMFn031399>