Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 26 Nov 2000 16:39:56 +0600
From:      oleg dashevskii <od@iclub.nsu.ru>
To:        freebsd-stable@FreeBSD.org
Subject:   4.1..4.2-BETA freeze by high disk activity
Message-ID:  <20001126163956.A11704@spinner.intra.eu.org>

next in thread | raw e-mail | index | archive | help

--nFreZHaLTZJo0R7j
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline

Hello,

I experience these troubles since I've installed 4.1-RELEASE, now I
have 4.2-BETA (not RELEASE yet), but it's all the same.

When a big disk activity occurs (e.g. some package installation with
lots of small files, make buildworld or rm -rf /usr/obj/*), my
FreeBSD box can suddenly but completely freeze. After some time it
reboots on its own.

I've attached the `dmesg` output. It's a 5MVP3 "Gemini" mainboard
with the VIA APOLLO MVP3 chipset.

Softupdates are set on /usr.

/od


--nFreZHaLTZJo0R7j
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename=dmesg

Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 4.2-BETA #0: Tue Nov 14 12:36:08 NOVT 2000
    root@spinner.intra.eu.org:/usr/obj/usr/src/sys/SPINNER
Timecounter "i8254"  frequency 1193182 Hz
CPU: AMD-K6(tm) 3D processor (350.80-MHz 586-class CPU)
  Origin = "AuthenticAMD"  Id = 0x58c  Stepping = 12
  Features=0x8021bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX>
  AMD Features=0x80000800<SYSCALL,3DNow!>
real memory  = 67108864 (65536K bytes)
avail memory = 62046208 (60592K bytes)
Preloaded elf kernel "kernel" at 0xc034c000.
K6-family MTRR support enabled (2 registers)
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib2: <VIA 82C598MVP (Apollo MVP3) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib2
pci1: <Matrox MGA G100 AGP graphics accelerator> at 0.0 irq 9
isab0: <VIA 82C586 PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C586 ATA33 controller> port 0xe000-0xe00f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xe400-0xe41f irq 0 at device 7.2 on pci0
uhci0: Invalid irq 0
uhci0: Please switch on USB support and switch PNP-OS to 'No' in BIOS
device_probe_and_attach: uhci0 attach returned 6
pcib1: <Host to PCI bridge> on motherboard
pci2: <PCI bus> on pcib1
isa0: too many dependant configs (8)
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio2 at port 0x3e8-0x3ef irq 5 on isa0
sio2: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ep0: <3Com 3C509-TPC EtherLink III> at port 0x390-0x39f irq 11 on isa0
ep0: Ethernet address 00:60:97:ce:1d:96
sbc0: <Creative SB16/SB32> at port 0x220-0x22f,0x300-0x301,0x388-0x38b irq 9 drq 0,5 on isa0
pcm0: <SB DSP 4.16> on sbc0
IP packet filtering initialized, divert enabled, rule-based forwarding disabled, default to deny, logging limited to 100 packets/entry by default
ad0: 8063MB <FUJITSU MPE3084AE> [16383/16/63] at ata0-master UDMA33
acd0: CDROM <HITACHI CDR-8335> at ata1-slave using PIO4
Mounting root from ufs:/dev/ad0s2a
WARNING: / was not properly dismounted

--nFreZHaLTZJo0R7j--


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20001126163956.A11704>