Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 09 Dec 2003 22:14:25 +0900
From:      Tatsumi Hosokawa <hosokawa@FreeBSD.org>
To:        current@freebsd.org
Subject:   Re: SATA disks on 5.2-CURRENT
Message-ID:  <86vfoqkua6.wl@bougainvillea.FromTo.Cc>
In-Reply-To: <86r7zgwkx0.wl@bougainvillea.FromTo.Cc>
References:  <86u14cwqrf.wl@bougainvillea.FromTo.Cc> <3FD3566D.6000900@freebsd.org> <20031207171004.GA5019@gblx.net> <86r7zgwkx0.wl@bougainvillea.FromTo.Cc>

next in thread | previous in thread | raw e-mail | index | archive | help
At Mon, 08 Dec 2003 03:19:07 +0900,
Tatsumi Hosokawa wrote:
> 
> At Sun, 7 Dec 2003 17:10:04 +0000,
> Dan Foster wrote:
> > 
> > Sounds interesting... I've got an Asus P4C800 (i875 w/ICH5) and SATA
> > (Seagate Barracuda ST3120026AS and Western Digital Raptor WD360GD) but
> > haven't tested the latest code yet -- worked fine with the build from about
> > 10 days ago, FWIW.
> 
> I installed this system with 5.2-BETA (ISO image), and cvsup'ed
> today's current.  I experienced the same instability on both kernels.

On today's -current, my SiI 3112A Rev.00 works fine, but ICH5 still
doesn't work well.  When I executed newfs on ICH5 SATA disks,
following messages were displayed.

---------------------------------------------------------------------------
ad4: WARNING - WRITE_DMA recovered from missing interrupt
ad4: FAILURE - WRITE_DMA status=ff<BUSY,READY,DMA_READY,DSC,DRQ,CORRECTABLE,INDEX,ERROR> error=0
ad4: timeout sending command=c8
ad4: error issuing DMA command
ad6: WARNING - WRITE_DMA recovered from missing interrupt
ad6: FAILURE - WRITE_DMA status=ff<BUSY,READY,DMA_READY,DSC,DRQ,CORRECTABLE,INDEX,ERROR> error=0
---------------------------------------------------------------------------

This is 'boot -v' message of this machine.  Following mutex messages
are displayed near ICH5 SATA probe message.

---------------------------------------------------------------------------
Sleeping on "atasrl" with the following non-sleepable locks held:
exclusive sleep mutex g_xdown r = 0 (0xe0438cbc) locked @ /usr/src/sys/geom/geom_io.c:355
Sleeping on "atasrl" with the following non-sleepable locks held:
exclusive sleep mutex g_xdown r = 0 (0xe0438cbc) locked @ /usr/src/sys/geom/geom_io.c:355
---------------------------------------------------------------------------

---------------------------------------------------------------------------
    8    D   0x6b  3 4 5 6 7 9 10 11 12 14 15
slot 3      3    0    A   0x62  3 4 5 6 7 9 10 11 12 14 15
slot 3      3    0    B   0x69  3 4 5 6 7 9 10 11 12 14 15
slot 3      3    0    C   0x6a  3 4 5 6 7 9 10 11 12 14 15
slot 3      3    0    D   0x60  3 4 5 6 7 9 10 11 12 14 15
slot 4      3    1    A   0x69  3 4 5 6 7 9 10 11 12 14 15
slot 4      3    1    B   0x6a  3 4 5 6 7 9 10 11 12 14 15
slot 4      3    1    C   0x60  3 4 5 6 7 9 10 11 12 14 15
slot 4      3    1    D   0x62  3 4 5 6 7 9 10 11 12 14 15
slot 5      3    2    A   0x6a  3 4 5 6 7 9 10 11 12 14 15
slot 5      3    2    B   0x60  3 4 5 6 7 9 10 11 12 14 15
slot 5      3    2    C   0x62  3 4 5 6 7 9 10 11 12 14 15
slot 5      3    2    D   0x69  3 4 5 6 7 9 10 11 12 14 15
slot 6      3    3    A   0x60  3 4 5 6 7 9 10 11 12 14 15
slot 6      3    3    B   0x62  3 4 5 6 7 9 10 11 12 14 15
slot 6      3    3    C   0x69  3 4 5 6 7 9 10 11 12 14 15
slot 6      3    3    D   0x6a  3 4 5 6 7 9 10 11 12 14 15
slot 7      3    4    A   0x62  3 4 5 6 7 9 10 11 12 14 15
slot 7      3    4    B   0x69  3 4 5 6 7 9 10 11 12 14 15
slot 7      3    4    C   0x6a  3 4 5 6 7 9 10 11 12 14 15
slot 7      3    4    D   0x60  3 4 5 6 7 9 10 11 12 14 15
slot 8      3    5    A   0x69  3 4 5 6 7 9 10 11 12 14 15
slot 8      3    5    B   0x6a  3 4 5 6 7 9 10 11 12 14 15
slot 8      3    5    C   0x60  3 4 5 6 7 9 10 11 12 14 15
slot 8      3    5    D   0x62  3 4 5 6 7 9 10 11 12 14 15
embedded    2    1    A   0x62  3 4 5 6 7 9 10 11 12 14 15
embedded    2    1    B   0x62  3 4 5 6 7 9 10 11 12 14 15
embedded    2    1    C   0x62  3 4 5 6 7 9 10 11 12 14 15
embedded    2    1    D   0x62  3 4 5 6 7 9 10 11 12 14 15
embedded    0   30    A   0x60  3 4 5 6 7 9 10 11 12 14 15
embedded    0   30    B   0x61  3 4 5 6 7 9 10 11 12 14 15
embedded    0   30    C   0x62  3 4 5 6 7 9 10 11 12 14 15
embedded    0   30    D   0x63  3 4 5 6 7 9 10 11 12 14 15
embedded    0   31    A   0x62  3 4 5 6 7 9 10 11 12 14 15
embedded    0   31    B   0x61  3 4 5 6 7 9 10 11 12 14 15
embedded    0   31    C   0x60  3 4 5 6 7 9 10 11 12 14 15
embedded    0   31    D   0x63  3 4 5 6 7 9 10 11 12 14 15
embedded    0    1    A   0x60  3 4 5 6 7 9 10 11 12 14 15
embedded    0    1    B   0x61  3 4 5 6 7 9 10 11 12 14 15
embedded    0    1    C   0x62  3 4 5 6 7 9 10 11 12 14 15
embedded    0    1    D   0x63  3 4 5 6 7 9 10 11 12 14 15
embedded    0   29    A   0x60  3 4 5 6 7 9 10 11 12 14 15
embedded    0   29    B   0x63  3 4 5 6 7 9 10 11 12 14 15
embedded    0   29    C   0x62  3 4 5 6 7 9 10 11 12 14 15
embedded    0   29    D   0x6b  3 4 5 6 7 9 10 11 12 14 15
AcpiOsDerivePciId: bus 0 dev 31 func 0
AcpiOsDerivePciId: bus 0 dev 31 func 0
acpi0: Power Button (fixed)
ACPI timer looks GOOD min = 3, max = 3, width = 0
ACPI timer looks GOOD min = 3, max = 3, width = 0
ACPI timer looks GOOD min = 3, max = 3, width = 0
ACPI timer looks GOOD min = 3, max = 3, width = 0
ACPI timer looks GOOD min = 3, max = 3, width = 0
ACPI timer looks GOOD min = 3, max = 3, width = 0
ACPI timer looks GOOD min = 3, max = 3, width = 0
ACPI timer looks GOOD min = 3, max = 3, width = 0
ACPI timer looks GOOD min = 3, max = 3, width = 0
ACPI timer looks GOOD min = 3, max = 3, width = 0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_cpu1: <CPU> on acpi0
device_probe_and_attach: acpi_cpu1 attach returned 6
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0x1000-0x10bf,0xcf8-0xcff on acpi0
---- initial configuration ------------------------
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
	map[10]: type 3, range 32, base f0000000, size 27, enabled
found->	vendor=0x8086, dev=0x2570, revid=0x02
	bus=0, slot=0, func=0
	class=06-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x2571, revid=0x02
	bus=0, slot=1, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x00a0, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x2573, revid=0x02
	bus=0, slot=3, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x00a0, cachelnsz=0 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
	map[20]: type 4, range 32, base 0000bc00, size  5, enabled
pcib0: matched entry for 0.29.INTA (source )
pcib0: device is hardwired to IRQ 16
found->	vendor=0x8086, dev=0x24d2, revid=0x02
	bus=0, slot=29, func=0
	class=0c-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=16
	map[20]: type 4, range 32, base 0000b000, size  5, enabled
pcib0: matched entry for 0.29.INTB (source )
pcib0: device is hardwired to IRQ 19
found->	vendor=0x8086, dev=0x24d4, revid=0x02
	bus=0, slot=29, func=1
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=19
	map[20]: type 4, range 32, base 0000b400, size  5, enabled
pcib0: matched entry for 0.29.INTC (source )
pcib0: device is hardwired to IRQ 18
found->	vendor=0x8086, dev=0x24d7, revid=0x02
	bus=0, slot=29, func=2
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=18
	map[20]: type 4, range 32, base 0000b800, size  5, enabled
pcib0: matched entry for 0.29.INTA (source )
pcib0: device is hardwired to IRQ 16
found->	vendor=0x8086, dev=0x24de, revid=0x02
	bus=0, slot=29, func=3
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=16
	map[10]: type 1, range 32, base fc100000, size 10, enabled
pcib0: matched entry for 0.29.INTD (source )
pcib0: device is hardwired to IRQ 23
found->	vendor=0x8086, dev=0x24dd, revid=0x02
	bus=0, slot=29, func=7
	class=0c-03-20, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=d, irq=23
	powerspec 2  supports D0 D3  current D0
found->	vendor=0x8086, dev=0x244e, revid=0xc2
	bus=0, slot=30, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x0080, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x02 (500 ns)
found->	vendor=0x8086, dev=0x24d0, revid=0x02
	bus=0, slot=31, func=0
	class=06-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	map[10]: type 4, range 32, base 00000000, size  3, enabled
	map[14]: type 4, range 32, base 00000000, size  2, enabled
	map[18]: type 4, range 32, base 00000000, size  3, enabled
	map[1c]: type 4, range 32, base 00000000, size  2, enabled
	map[20]: type 4, range 32, base 0000f000, size  4, enabled
found->	vendor=0x8086, dev=0x24db, revid=0x02
	bus=0, slot=31, func=1
	class=01-01-8a, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0288, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=255
	map[10]: type 4, range 32, base 0000c000, size  3, enabled
	map[14]: type 4, range 32, base 0000c400, size  2, enabled
	map[18]: type 4, range 32, base 0000c800, size  3, enabled
	map[1c]: type 4, range 32, base 0000cc00, size  2, enabled
	map[20]: type 4, range 32, base 0000d000, size  4, enabled
pcib0: matched entry for 0.31.INTA (source )
pcib0: device is hardwired to IRQ 18
found->	vendor=0x8086, dev=0x24d1, revid=0x02
	bus=0, slot=31, func=2
	class=01-01-8f, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x02a0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=18
	map[20]: type 4, range 32, base 00001400, size  5, enabled
pcib0: matched entry for 0.31.INTB (source )
pcib0: device is hardwired to IRQ 17
found->	vendor=0x8086, dev=0x24d3, revid=0x02
	bus=0, slot=31, func=3
	class=0c-05-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=17
	map[10]: type 4, range 32, base 0000d800, size  8, enabled
	map[14]: type 4, range 32, base 0000dc00, size  6, enabled
	map[18]: type 1, range 32, base fc101000, size  9, enabled
	map[1c]: type 1, range 32, base fc102000, size  8, enabled
pcib0: matched entry for 0.31.INTB (source )
pcib0: device is hardwired to IRQ 17
found->	vendor=0x8086, dev=0x24d5, revid=0x02
	bus=0, slot=31, func=5
	class=04-01-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=17
	powerspec 2  supports D0 D3  current D0
agp0: <Intel 82865 host to AGP bridge> mem 0xf0000000-0xf7ffffff at device 0.0 on pci0
agp0: allocating GATT for aperture of size 128M
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0xf000-0xfff
pcib1:   memory decode     0xf8000000-0xf9ffffff
pcib1:   prefetched decode 0xe0000000-0xefffffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
	map[10]: type 1, range 32, base f8000000, size 24, enabled
	map[14]: type 3, range 32, base e0000000, size 28, enabled
pcib0: matched entry for 0.1.INTA (source )
pcib0: device is hardwired to IRQ 16
pcib1: slot 0 INTA is routed to irq 16
found->	vendor=0x10de, dev=0x0312, revid=0xa1
	bus=1, slot=0, func=0
	class=03-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns)
	intpin=a, irq=16
	powerspec 2  supports D0 D3  current D0
pci1: <display, VGA> at device 0.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pcib2:   secondary bus     2
pcib2:   subordinate bus   2
pcib2:   I/O decode        0xa000-0xafff
pcib2:   memory decode     0xfc000000-0xfc0fffff
pcib2:   prefetched decode 0xfff00000-0xfffff
pcib2: could not get PCI interrupt routing table for \\_SB_.PCI0.CSAB - AE_NOT_FOUND
pci2: <ACPI PCI bus> on pcib2
pci2: physical bus=2
	map[10]: type 1, range 32, base fc000000, size 17, enabled
	map[18]: type 4, range 32, base 0000a000, size  5, enabled
found->	vendor=0x8086, dev=0x1019, revid=0x00
	bus=2, slot=1, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0238, cachelnsz=8 (dwords)
	lattimer=0x00 (0 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D3  current D0
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.19> port 0xa000-0xa01f mem 0xfc000000-0xfc01ffff irq 11 at device 1.0 on pci2
pcib2: device em0 requested decoded memory range 0xfc000000-0xfc01ffff
pcib2: device em0 requested decoded I/O range 0xa000-0xa01f
em0: bpf attached
em0:  Speed:N/A  Duplex:N/A
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xbc00-0xbc1f irq 16 at device 29.0 on pci0
usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xb000-0xb01f irq 19 at device 29.1 on pci0
usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xb400-0xb41f irq 18 at device 29.2 on pci0
usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xb800-0xb81f irq 16 at device 29.3 on pci0
usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib3:   secondary bus     3
pcib3:   subordinate bus   3
pcib3:   I/O decode        0x8000-0x9fff
pcib3:   memory decode     0xfa000000-0xfbffffff
pcib3:   prefetched decode 0xfff00000-0xfffff
---- initial configuration ------------------------
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
pci3: <ACPI PCI bus> on pcib3
pci3: physical bus=3
	map[10]: type 4, range 32, base 00008000, size  3, enabled
	map[14]: type 4, range 32, base 00008400, size  2, enabled
	map[18]: type 4, range 32, base 00008800, size  3, enabled
	map[1c]: type 4, range 32, base 00008c00, size  2, enabled
	map[20]: type 4, range 32, base 00009000, size  4, enabled
	map[24]: type 1, range 32, base fb015000, size  9, enabled
pcib3: matched entry for 3.1.INTA (source )
pcib3: device is hardwired to IRQ 21
found->	vendor=0x1095, dev=0x3112, revid=0x02
	bus=3, slot=1, func=0
	class=01-80-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x02b0, cachelnsz=8 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=21
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 64, base fb000000, size 16, enabled
pcib3: matched entry for 3.2.INTA (source )
pcib3: device is hardwired to IRQ 22
found->	vendor=0x173b, dev=0x03ea, revid=0x15
	bus=3, slot=2, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x02b0, cachelnsz=8 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=22
	powerspec 2  supports D0 D3  current D0
	MSI supports 8 messages, 64 bit
	map[10]: type 1, range 32, base fb014000, size 11, enabled
	map[14]: type 1, range 32, base fb010000, size 14, enabled
pcib3: matched entry for 3.5.INTA (source )
pcib3: device is hardwired to IRQ 21
found->	vendor=0x104c, dev=0x8024, revid=0x00
	bus=3, slot=5, func=0
	class=0c-00-10, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns)
	intpin=a, irq=21
	powerspec 2  supports D0 D1 D2 D3  current D0
atapci0: <SiI 3112 SATA150 controller> port 0x9000-0x900f,0x8c00-0x8c03,0x8800-0x8807,0x8400-0x8403,0x8000-0x8007 mem 0xfb015000-0xfb0151ff irq 21 at device 1.0 on pci3
pcib3: device atapci0 requested decoded I/O range 0x9000-0x900f
atapci0: [MPSAFE]
pcib3: device atapci0 requested decoded memory range 0xfb015000-0xfb0151ff
ata2: reset tp1 mask=01 ostat0=50 ostat1=00
ata2-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata2: reset tp2 mask=01 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata2: at 0xfb015000 on atapci0
ata2: [MPSAFE]
ata3: reset tp1 mask=01 ostat0=50 ostat1=00
ata3-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata3: reset tp2 mask=01 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata3: at 0xfb015000 on atapci0
ata3: [MPSAFE]
bge0: <Altima AC9100 Gigabit Ethernet, ASIC rev. 0x105> mem 0xfb000000-0xfb00ffff irq 22 at device 2.0 on pci3
pcib3: device bge0 requested decoded memory range 0xfb000000-0xfb00ffff
bge0: Ethernet address: 00:07:40:4c:10:a2
miibus0: <MII bus> on bge0
brgphy0: <BCM5701 10/100/1000baseTX PHY> on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
bge0: bpf attached
fwohci0: <Texas Instruments TSB43AB23> mem 0xfb010000-0xfb013fff,0xfb014000-0xfb0147ff irq 21 at device 5.0 on pci3
fwohci0: latency timer 32 -> 32.
fwohci0: cache size 8 -> 8.
pcib3: device fwohci0 requested decoded memory range 0xfb014000-0xfb0147ff
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channel is 4.
fwohci0: EUI64 00:0d:61:00:00:17:35:3c
fwohci0: resetting OHCI...done (loop=0)
fwohci0: fwphy_rddata: 0x2 loop=0, retry=0
fwohci0: fwphy_rddata: 0x3 loop=0, retry=0
fwohci0: Phy 1394a available S400, 3 ports.
fwohci0: fwphy_rddata: 0x5 loop=0, retry=0
fwohci0: Enable 1394a Enhancements
fwohci0: fwphy_rddata: 0x5 loop=0, retry=0
fwohci0: fwphy_rddata: 0x2 loop=0, retry=0
fwohci0: fwphy_rddata: 0x4 loop=0, retry=0
fwohci0: fwphy_rddata: 0x4 loop=0, retry=0
fwohci0: fwphy_rddata: 0x4 loop=0, retry=0
fwohci0: Link S400, max_rec 2048 bytes.
fwohci0: BUS_OPT 0xa002 -> 0xf800a002
fwohci0: fwohci_set_intr: 1
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:0d:61:17:35:3c
fwe0: bpf attached
sbp0: <SBP-2/SCSI over FireWire> on firewire0
sbp_attach (cold=1)
fwohci0: Initiate bus reset
fwohci0: fwphy_rddata: 0x1 loop=0, retry=0
fwohci0: fwphy_rddata: 0x1 loop=0, retry=0
fwohci0: BUS reset
sbp_post_busreset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
fwohci0: fw_set_bus_manager: 0->0 (loop=0)
firewire0: bus manager 0 (me)
send phy_config root_node=-1 gap_count=5
fwohci0: maxdesc: 2
fwohci0: start AT DMA status=0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH5 UDMA100 controller> port 0xf000-0xf00f,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 on pci0
ata0: reset tp1 mask=03 ostat0=50 ostat1=50
ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0-slave:  stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 mask=03 stat0=50 stat1=50 devices=0x3<ATA_SLAVE,ATA_MASTER>
ata0: at 0x1f0 irq 14 on atapci1
ata0: [MPSAFE]
ata1: reset tp1 mask=03 ostat0=50 ostat1=00
ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1-slave:  stat=0x00 err=0x00 lsb=0x00 msb=0x00
ata1: reset tp2 mask=03 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ata1: at 0x170 irq 15 on atapci1
ata1: [MPSAFE]
atapci2: <Intel ICH5 SATA150 controller> port 0xd000-0xd00f,0xcc00-0xcc03,0xc800-0xc807,0xc400-0xc403,0xc000-0xc007 irq 18 at device 31.2 on pci0
atapci2: [MPSAFE]
ata4: reset tp1 mask=03 ostat0=50 ostat1=00
ata4-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata4-slave:  stat=0x00 err=0x01 lsb=0x00 msb=0x00
ata4: reset tp2 mask=03 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata4: at 0xc000 on atapci2
ata4: [MPSAFE]
ata5: reset tp1 mask=03 ostat0=50 ostat1=00
ata5-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata5-slave:  stat=0x00 err=0x01 lsb=0x00 msb=0x00
ata5: reset tp2 mask=03 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata5: at 0xc800 on atapci2
ata5: [MPSAFE]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pci0: <multimedia, audio> at device 31.5 (no driver attached)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
psmcpnp0 irq 12 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model MouseMan+, device ID 0-49, 3 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:08, syncbits:08
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
acpi_cpu1: <CPU> on acpi0
device_probe_and_attach: acpi_cpu1 attach returned 6
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
ex_isa_identify()
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROM> at iomem 0xd0000-0xd47ff on isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
fdc0 failed to probe at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
ppc0: parallel port not found.
ppc0: <Parallel port> failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0xc401 0xc401 0xc401 0xc401
sio0: probe failed test(s): 0 1 2 4 6 7 9
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0xc401 0xc401 0xc401 0xc401
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 54 80 
bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 2813532920 Hz quality 800
Timecounters tick every 10.000 msec
lo0: bpf attached
Current DB 0
ch = 0
 Current OP   KEY INT BR   len     Addr   Depend Stat: Cnt
3dda1000 OUTL ST2 ALL ALL    12 00000000 3dda1080 8411:0007 RUN,ACTIVE, ack complete(11)
0x000000e0 0x00450000 0xffbaffff 0x00000000
ata0-slave: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
ata0-master: setting PIO4 on Intel ICH5 chip
ata0-master: setting UDMA100 on Intel ICH5 chip
ata0-slave: setting PIO4 on Intel ICH5 chip
ata0-slave: setting UDMA100 on Intel ICH5 chip
GEOM: create disk ad0 dp=0xc6aae360
ad0: <IBM-DTLA-307030/TX4OA50C> ATA-5 disk at ata0-master
ad0: 29314MB (60036480 sectors), 59560 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA100
GEOM: new disk ad0
ar: FreeBSD check1 failed
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/15/63 s:63 l:60036417
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s1, start 32256 length 30738645504 end 30738677759
GEOM: create disk ad1 dp=0xc6c8cc60
ad1: <IBM-DTLA-307030/TX4OA50C> ATA-5 disk at ata0-slave
ad1: 29314MB (60036480 sectors), 59560 C, 16 H, 63 S, 512 B
ad1: 16 secs/int, 1 depth queue, UDMA100
ar: FreeBSD check1 failed
GEOM: Configure ad0s1a, start 0 length 268435456 end 268435455
GEOM: Configure ad0s1c, start 0 length 30738645504 end 30738645503
GEOM: Configure ad0s1d, start 268435456 length 30470210048 end 30738645503
GEOM: new disk ad1
ata1-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin
ata1-master: setting PIO4 on Intel ICH5 chip
acd0: <MATSHITADVD-RAM LF-D310/A123> DVDR drive at ata1 as master
acd0:  1024KB buffer, PIO4
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes: DVDR, DVDRAM, test write
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ata2-master: pio=0x0c wdma=0x22 udma=0x46 cable=40pin
GEOM: create disk ad4 dp=0xc6c8c060
ad4: <Maxtor 7Y250M0/YAR51BW0> ATA-7 disk at ata2-master
ad4: 239372MB (490234752 sectors), 486344 C, 16 H, 63 S, 512 B
ad4: 16 secs/int, 1 depth queue, UDMA100
ar: FreeBSD check1 failed
ata3-master: pio=0x0c wdma=0x22 udma=0x46 cable=40pin
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/15/63 s:63 l:60036417
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad1s1, start 32256 length 30738645504 end 30738677759
GEOM: create disk ad6 dp=0xc6aafd60
ad6: <Maxtor 7Y250M0/YAR51BW0> ATA-7 disk at ata3-master
ad6: 239372MB (490234752 sectors), 486344 C, 16 H, 63 S, 512 B
ad6: 16 secs/int, 1 depth queue, UDMA100
GEOM: new disk ad4
GEOM: Configure ad1s1b, start 0 length 4294967296 end 4294967295
GEOM: Configure ad1s1c, start 0 length 30738645504 end 30738645503
GEOM: Configure ad1s1d, start 4294967296 length 268435456 end 4563402751
GEOM: Configure ad1s1e, start 4563402752 length 536870912 end 5100273663
GEOM: Configure ad1s1f, start 5100273664 length 25638371840 end 30738645503
GEOM: new disk ad6
Sleeping on "atasrl" with the following non-sleepable locks held:
exclusive sleep mutex g_xdown r = 0 (0xe0438cbc) locked @ /usr/src/sys/geom/geom_io.c:355
Sleeping on "atasrl" with the following non-sleepable locks held:
exclusive sleep mutex g_xdown r = 0 (0xe0438cbc) locked @ /usr/src/sys/geom/geom_io.c:355
ar: FreeBSD check1 failed
ata4-master: pio=0x0c wdma=0x22 udma=0x46 cable=40pin
GEOM: create disk ad8 dp=0xc6aaf560
ad8: <Maxtor 7Y250M0/YAR51BW0> ATA-7 disk at ata4-master
ad8: 239372MB (490234752 sectors), 486344 C, 16 H, 63 S, 512 B
ad8: 16 secs/int, 1 depth queue, UDMA100
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:490223412
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad4s1, start 32256 length 250994386944 end 250994419199
ata5-master: pio=0x0c wdma=0x22 udma=0x46 cable=40pin
GEOM: create disk ad10 dp=0xc6aafb60
ad10: <Maxtor 7Y250M0/YAR51BW0> ATA-7 disk at ata5-master
ad10: 239372MB (490234752 sectors), 486344 C, 16 H, 63 S, 512 B
ad10: 16 secs/int, 1 depth queue, UDMA100
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:490223412
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad6s1, start 32256 length 250994386944 end 250994419199
GEOM: new disk ad8
GEOM: Configure ad4s1c, start 0 length 250994386944 end 250994386943
GEOM: Configure ad4s1d, start 0 length 250994386944 end 250994386943
GEOM: new disk ad10
GEOM: Configure ad6s1c, start 0 length 250994386944 end 250994386943
GEOM: Configure ad6s1d, start 0 length 250994386944 end 250994386943
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:490223412
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad8s1, start 32256 length 250994386944 end 250994419199
bus_explore done
sbp_post_explore (sbp_cold=2)
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:490223412
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad10s1, start 32256 length 250994386944 end 250994419199
GEOM: Configure ad8s1c, start 0 length 250994386944 end 250994386943
GEOM: Configure ad8s1d, start 0 length 250994386944 end 250994386943
GEOM: Configure ad10s1c, start 0 length 250994386944 end 250994386943
GEOM: Configure ad10s1d, start 0 length 250994386944 end 250994386943
(probe5:sbp0:0:5:0): error 22
(probe5:sbp0:0:5:0): Unretryable Error
(probe6:sbp0:0:6:0): error 22
(probe6:sbp0:0:6:0): Unretryable Error
(probe0:sbp0:0:0:0): error 22
(probe0:sbp0:0:0:0): Unretryable Error
(probe1:sbp0:0:1:0): error 22
(probe1:sbp0:0:1:0): Unretryable Error
(probe2:sbp0:0:2:0): error 22
(probe2:sbp0:0:2:0): Unretryable Error
(probe3:sbp0:0:3:0): error 22
(probe3:sbp0:0:3:0): Unretryable Error
(probe4:sbp0:0:4:0): error 22
(probe4:sbp0:0:4:0): Unretryable Error
ioapic0: routing intpin 1 (IRQ 1) to cluster 0
ioapic0: routing intpin 4 (IRQ 4) to cluster 0
ioapic0: routing intpin 8 (IRQ 8) to cluster 0
ioapic0: routing intpin 9 (IRQ 9) to cluster 0
ioapic0: routing intpin 11 (IRQ 11) to cluster 0
ioapic0: routing intpin 12 (IRQ 12) to cluster 0
ioapic0: routing intpin 13 (IRQ 13) to cluster 0
ioapic0: routing intpin 14 (IRQ 14) to cluster 0
ioapic0: routing intpin 15 (IRQ 15) to cluster 0
ioapic0: routing intpin 16 (IRQ 16) to cluster 0
ioapic0: routing intpin 18 (IRQ 18) to cluster 0
ioapic0: routing intpin 19 (IRQ 19) to cluster 0
ioapic0: routing intpin 21 (IRQ 21) to cluster 0
ioapic0: routing intpin 22 (IRQ 22) to cluster 0
---------------------------------------------------------------------------


--
Tatsumi Hosokawa
<hosokawa@FreeBSD.org>
http://FromTo.Cc/hosokawa/



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?86vfoqkua6.wl>