Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 13 Apr 2012 15:45:33 +0100
From:      krad <kraduk@gmail.com>
To:        Warren Block <wblock@wonkity.com>
Cc:        Christer Solskogen <christer.solskogen@gmail.com>, freebsd-questions@freebsd.org, Florian Unglaub <ueber@roladder.net>
Subject:   Re: Intel turbo mode support
Message-ID:  <CALfReydadN4Hk2PxxGEQMnXvwU=0mxNAcNQTmR7SJTU8-8T+dQ@mail.gmail.com>
In-Reply-To: <alpine.BSF.2.00.1204130710520.4581@wonkity.com>
References:  <4F85FF2E.3000309@roladder.net> <alpine.BSF.2.00.1204122103360.1978@wonkity.com> <86pqbbde96.fsf@mars.foo> <CAMVU60bfWDkibwBsEEAVT+POh=0txb6GVkpqdjETxvAaTVRZSQ@mail.gmail.com> <alpine.BSF.2.00.1204130710520.4581@wonkity.com>

Next in thread | Previous in thread | Raw E-Mail | Index | Archive | Help
On 13 April 2012 14:17, Warren Block <wblock@wonkity.com> wrote:
> On Fri, 13 Apr 2012, Christer Solskogen wrote:
>
>> On Fri, Apr 13, 2012 at 2:09 PM, Florian Unglaub <ueber@roladder.net>
>> wrote:
>>>
>>> I tried it with your powerd flags and the performance_cpu_freq setting
>>> on HIGH, but still the maximum freq_levels entry is 2800.
>>>
>>
>> How far should it go, then?
>
>
> The highest speed will be one higher than the nominal rating:
>
> =A0dev.cpu.0.freq_levels: 5801/300000 5800/300000 ...
>
> The second one is the nominal speed, the first is turbo.
> dev.cpu.0.freq shows the current speed:
>
> =A0dev.cpu.0.freq: 5801
>
> _______________________________________________
> freebsd-questions@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.o=
rg"

is the uefi/bios setup correctly? Multiplier could be wrong or turbo
could be disabled



Want to link to this message? Use this URL: <http://docs.FreeBSD.org/cgi/mid.cgi?CALfReydadN4Hk2PxxGEQMnXvwU=0mxNAcNQTmR7SJTU8-8T+dQ>