Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 02 Mar 2005 21:11:49 -0800
From:      Remington <TastyNachos@charter.net>
To:        current@freebsd.org
Subject:   FXP driver not attaching
Message-ID:  <1109826709.622.4.camel@localhost.localdomain>

next in thread | raw e-mail | index | archive | help
FreeBSD  5.4-PRERELEASE FreeBSD 5.4-PRERELEASE #0: Sun Feb 27 03:57:45
PST 2005     root@:/usr/obj/usr/src/sys/VAIO  i386

Hello:
I just baught a new Sony laptop. I ran into a problem, fxp driver does
not attach tp the device. Windows recognizes it as a "Intel PRO/100 VE
Network Connection". I have attached a copy of my dmesg verbose as well
as pciconf -lv

---- dmesg ----
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.4-PRERELEASE #0: Sun Feb 27 03:57:45 PST 2005
    root@:/usr/obj/usr/src/sys/VAIO
Preloaded elf kernel "/boot/kernel/kernel" at 0xc09ec000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc09ec334.
Calibrating clock(s) ... i8254 clock: 1193192 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1729181617 Hz
CPU: Intel(R) Pentium(R) M processor 1.73GHz (1729.18-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6d8  Stepping = 8

Features=0xafe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
real memory  = 1064173568 (1014 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c25000 - 0x000000003e4d8fff, 1032536064 bytes (252084 pages)
avail memory = 1031815168 (984 MB)
Table 'APIC' at 0x3f6e9e78
MADT: Found table at 0x3f6e9e78
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 0: enabled
MADT: Found CPU APIC ID 1 ACPI ID 1: disabled
ACPI APIC Table: <Sony J0>
bios32: Found BIOS32 Service Directory header at 0xc00f74e0
bios32: Entry = 0xfd6b0 (c00fd6b0)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xfd6b0+0x255
pnpbios: Found PnP BIOS data at 0xc00f7560
pnpbios: Entry = f0000:c1c9  Rev = 1.0
Other BIOS signatures found:
APIC: CPU 0 has ACPI ID 0
MADT: Found IO APIC ID 1, Interrupt 0 at 0xfec00000
ioapic0: Changing APIC ID to 1
ioapic0: Routing external 8259A's -> intpin 0
ioapic0: intpin 0 -> ExtINT (edge, high)
ioapic0: intpin 1 -> ISA IRQ 1 (edge, high)
ioapic0: intpin 2 -> ISA IRQ 2 (edge, high)
ioapic0: intpin 3 -> ISA IRQ 3 (edge, high)
ioapic0: intpin 4 -> ISA IRQ 4 (edge, high)
ioapic0: intpin 5 -> ISA IRQ 5 (edge, high)
ioapic0: intpin 6 -> ISA IRQ 6 (edge, high)
ioapic0: intpin 7 -> ISA IRQ 7 (edge, high)
ioapic0: intpin 8 -> ISA IRQ 8 (edge, high)
ioapic0: intpin 9 -> ISA IRQ 9 (edge, high)
ioapic0: intpin 10 -> ISA IRQ 10 (edge, high)
ioapic0: intpin 11 -> ISA IRQ 11 (edge, high)
ioapic0: intpin 12 -> ISA IRQ 12 (edge, high)
ioapic0: intpin 13 -> ISA IRQ 13 (edge, high)
ioapic0: intpin 14 -> ISA IRQ 14 (edge, high)
ioapic0: intpin 15 -> ISA IRQ 15 (edge, high)
ioapic0: intpin 16 -> PCI IRQ 16 (level, low)
ioapic0: intpin 17 -> PCI IRQ 17 (level, low)
ioapic0: intpin 18 -> PCI IRQ 18 (level, low)
ioapic0: intpin 19 -> PCI IRQ 19 (level, low)
ioapic0: intpin 20 -> PCI IRQ 20 (level, low)
ioapic0: intpin 21 -> PCI IRQ 21 (level, low)
ioapic0: intpin 22 -> PCI IRQ 22 (level, low)
ioapic0: intpin 23 -> PCI IRQ 23 (level, low)
MADT: intr override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
ioapic0: intpin 2 trigger: edge
ioapic0: intpin 2 polarity: high
MADT: intr override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0: intpin 9 polarity: high
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: active-high
MADT: Ignoring local NMI routed to ACPI CPU 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
cpu0 BSP:
     ID: 0x00000000   VER: 0x00050014 LDR: 0x01000000 DFR: 0x0fffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
wlan: <802.11 Link Layer>
random: <entropy source, Software, Yarrow>
io: <I/O>
mem: <memory>
Pentium Pro MTRR support enabled
null: <null device, zero device>
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <Sony> on motherboard
acpi0: [MPSAFE]
pci_open(1):	mode 1 addr port (0x0cf8) is 0x8000f920
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=25908086)
pcibios: BIOS version 2.10
AcpiOsDerivePciId: bus 6 dev 3 func 0
AcpiOsDerivePciId: bus 0 dev 31 func 0
acpi0: Power Button (fixed)
AcpiOsDerivePciId: bus 0 dev 0 func 0
acpi_ec0: <Embedded Controller: GPE 0x17> port 0x66,0x62 on acpi0
acpi_ec0: info: new max delay is 100 us
acpi_ec0: info: new max delay is 130 us
acpi_ec0: info: new max delay is 630 us
ACPI timer: 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU (2 Cx states)> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_throttle0: P_CNT from P_BLK 0x1010
acpi_acad0: <AC Adapter> on acpi0
acpi_ec0: info: new max delay is 750 us
acpi_cmbat0: <Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
ACPI PCI link initial configuration:
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found->	vendor=0x8086, dev=0x2590, revid=0x03
	bus=0, slot=0, func=0
	class=06-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	map[10]: type 1, range 32, base b0080000, size 19, enabled
	map[14]: type 4, range 32, base 00001800, size  3, enabled
	map[18]: type 3, range 32, base c0000000, size 28, enabled
	map[1c]: type 1, range 32, base b0040000, size 18, enabled
pcib0: matched entry for 0.2.INTA
pcib0: slot 2 INTA hardwired to IRQ 16
found->	vendor=0x8086, dev=0x2592, revid=0x03
	bus=0, slot=2, func=0
	class=03-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0003, statreg=0x0090, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=16
	powerspec 2  supports D0 D3  current D0
	map[10]: type 1, range 32, base 00000000, size 19, memory disabled
found->	vendor=0x8086, dev=0x2792, revid=0x03
	bus=0, slot=2, func=1
	class=03-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0090, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D3  current D0
	map[10]: type 1, range 64, base b0000000, size 14, enabled
pcib0: matched entry for 0.27.INTA
pcib0: slot 27 INTA hardwired to IRQ 16
found->	vendor=0x8086, dev=0x2668, revid=0x04
	bus=0, slot=27, func=0
	class=04-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=16
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
	map[20]: type 4, range 32, base 00001820, size  5, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
found->	vendor=0x8086, dev=0x2658, revid=0x04
	bus=0, slot=29, func=0
	class=0c-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=23
	map[20]: type 4, range 32, base 00001840, size  5, enabled
pcib0: matched entry for 0.29.INTB
pcib0: slot 29 INTB hardwired to IRQ 19
found->	vendor=0x8086, dev=0x2659, revid=0x04
	bus=0, slot=29, func=1
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=19
	map[20]: type 4, range 32, base 00001860, size  5, enabled
pcib0: matched entry for 0.29.INTC
pcib0: slot 29 INTC hardwired to IRQ 18
found->	vendor=0x8086, dev=0x265a, revid=0x04
	bus=0, slot=29, func=2
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=18
	map[20]: type 4, range 32, base 00001880, size  5, enabled
pcib0: matched entry for 0.29.INTD
pcib0: slot 29 INTD hardwired to IRQ 16
found->	vendor=0x8086, dev=0x265b, revid=0x04
	bus=0, slot=29, func=3
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=d, irq=16
	map[10]: type 1, range 32, base b0004000, size 10, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
found->	vendor=0x8086, dev=0x265c, revid=0x04
	bus=0, slot=29, func=7
	class=0c-03-20, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=23
	powerspec 2  supports D0 D3  current D0
found->	vendor=0x8086, dev=0x2448, revid=0xd4
	bus=0, slot=30, func=0
	class=06-04-01, hdrtype=0x01, mfdev=0
	cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x2641, revid=0x04
	bus=0, slot=31, func=0
	class=06-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0007, statreg=0x0200, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	map[20]: type 4, range 32, base 00001810, size  4, enabled
found->	vendor=0x8086, dev=0x266f, revid=0x04
	bus=0, slot=31, func=1
	class=01-01-8a, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=255
	map[20]: type 4, range 32, base 000018a0, size  5, enabled
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 19
found->	vendor=0x8086, dev=0x266a, revid=0x04
	bus=0, slot=31, func=3
	class=0c-05-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=19
pci0: <display, VGA> at device 2.0 (no driver attached)
pci0: <display> at device 2.1 (no driver attached)
pci0: <multimedia> at device 27.0 (no driver attached)
uhci0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> port
0x1820-0x183f irq 23 at device 29.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1820
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> port
0x1840-0x185f irq 19 at device 29.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1840
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> port
0x1860-0x187f irq 18 at device 29.2 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1860
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> port
0x1880-0x189f irq 16 at device 29.3 on pci0
uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1880
uhci3: [GIANT-LOCKED]
usb3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib1:   secondary bus     6
pcib1:   subordinate bus   7
pcib1:   I/O decode        0x2000-0x2fff
pcib1:   memory decode     0xb0100000-0xb01fffff
pcib1:   prefetched decode 0xfff00000-0xfffff
pcib1:   Subtractively decoded bridge.
ACPI PCI link initial configuration:
pci6: <ACPI PCI bus> on pcib1
pci6: physical bus=6
	map[10]: type 1, range 32, base 00000000, size 12, memory disabled
found->	vendor=0x104c, dev=0xac8e, revid=0x00
	bus=6, slot=3, func=0
	class=06-07-00, hdrtype=0x02, mfdev=1
	cmdreg=0x0000, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x03 (750 ns)
	intpin=a, irq=255
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base b0104000, size 11, enabled
pcib1: device (null) requested decoded memory range
0xb0104000-0xb01047ff
	map[14]: type 1, range 32, base b0100000, size 14, enabled
pcib1: device (null) requested decoded memory range
0xb0100000-0xb0103fff
pcib1: matched entry for 6.3.INTC
pcib1: slot 3 INTC hardwired to IRQ 18
found->	vendor=0x104c, dev=0x802e, revid=0x00
	bus=6, slot=3, func=2
	class=0c-00-10, hdrtype=0x00, mfdev=1
	cmdreg=0x0012, statreg=0x0210, cachelnsz=16 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x03 (750 ns), maxlat=0x04 (1000 ns)
	intpin=c, irq=18
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base b0105000, size 12, enabled
pcib1: device (null) requested decoded memory range
0xb0105000-0xb0105fff
pcib1: matched entry for 6.3.INTB
pcib1: slot 3 INTB hardwired to IRQ 17
found->	vendor=0x104c, dev=0xac8f, revid=0x00
	bus=6, slot=3, func=3
	class=01-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0002, statreg=0x0210, cachelnsz=16 (dwords)
	lattimer=0x39 (1710 ns), mingnt=0x07 (1750 ns), maxlat=0x04 (1000 ns)
	intpin=b, irq=17
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base b0106000, size 12, enabled
pcib1: device (null) requested decoded memory range
0xb0106000-0xb0106fff
pcib1: matched entry for 6.4.INTA
pcib1: slot 4 INTA hardwired to IRQ 22
found->	vendor=0x8086, dev=0x4220, revid=0x05
	bus=6, slot=4, func=0
	class=02-80-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0012, statreg=0x0290, cachelnsz=16 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x03 (750 ns), maxlat=0x18 (6000 ns)
	intpin=a, irq=22
	powerspec 2  supports D0 D3  current D0
	map[10]: type 1, range 32, base b0107000, size 12, enabled
pcib1: device (null) requested decoded memory range
0xb0107000-0xb0107fff
	map[14]: type 4, range 32, base 00002000, size  6, enabled
pcib1: device (null) requested decoded I/O range 0x2000-0x203f
pcib1: matched entry for 6.8.INTA
pcib1: slot 8 INTA hardwired to IRQ 20
found->	vendor=0x8086, dev=0x1068, revid=0x04
	bus=6, slot=8, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0017, statreg=0x0290, cachelnsz=16 (dwords)
	lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns)
	intpin=a, irq=20
	powerspec 2  supports D0 D1 D2 D3  current D0
cbb0: <PCI-CardBus Bridge> at device 3.0 on pci6
pcib1: device cbb0 requested decoded memory range 0xb0100000-0xb01fffff
cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0xb0108000
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pcib1: matched entry for 6.3.INTA
pcib1: slot 3 INTA hardwired to IRQ 16
cbb0: [MPSAFE]
cbb0: PCI Configuration space:
  0x00: 0xac8e104c 0x02100007 0x06070000 0x00824000 
  0x10: 0xb0108000 0x020000a0 0x40070706 0xfffff000 
  0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 
  0x30: 0x00000000 0xfffffffc 0x00000000 0x07400110 
  0x40: 0x818f104d 0x00000001 0x00000000 0x00000000 
  0x50: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x60: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x70: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x80: 0x2844b060 0x06900019 0x001f0000 0x01001b22 
  0x90: 0x606401c0 0x00000000 0x00000000 0x00000000 
  0xa0: 0xfe320001 0x00c00000 0x00000000 0x00000000 
  0xb0: 0x08000000 0x00000000 0x00000000 0x00000000 
  0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 
fwohci0: vendor=104c, dev=802e
fwohci0: <1394 Open Host Controller Interface> mem
0xb0100000-0xb0103fff,0xb0104000-0xb01047ff irq 18 at device 3.2 on pci6
fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xb0104000
fwohci0: [MPSAFE]
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 08:00:46:03:01:d0:6c:06
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 0a:00:46:d0:6c:06
fwe0: bpf attached
fwe0: Ethernet address: 0a:00:46:d0:6c:06
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
pci6: <mass storage> at device 3.3 (no driver attached)
pci6: <network> at device 4.0 (no driver attached)
pci6: <network, ethernet> at device 8.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH6 UDMA100 controller> port
0x1810-0x181f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1810
ata0: channel #0 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=50
ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0-slave:  stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: reset tp2 stat0=50 stat1=00 devices=0x9<ATAPI_SLAVE,ATA_MASTER>
ata0: [MPSAFE]
ata1: channel #1 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
ata1: [MPSAFE]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
unknown: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model GlidePoint, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000008, packet size:3
psm0: syncmask:c0, syncbits:00
unknown: not probed (disabled)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
ex_isa_identify()
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem
0xe0000-0xe3fff,0xdc000-0xdffff,0xc0000-0xcffff on isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0 failed to probe at port 0x3f0-0x3f5 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
ppc0 failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0 failed to probe at port 0x3f8 irq 4 on isa0
sio1 failed to probe at port 0x2f8 irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 1729181617 Hz quality 800
Timecounters tick every 10.000 msec
lo0: bpf attached
acpi_acad0: acline initialization start
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
acpi_cmbat0: battery initialization start
acpi_ec0: info: new max delay is 790 us
ata0-slave: pio=0x0c wdma=0x22 udma=0x42 cable=40pin
ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
ata0-master: setting PIO4 on Intel ICH6 chip
ata0-master: setting UDMA100 on Intel ICH6 chip
ata0-slave: setting PIO4 on Intel ICH6 chip
ata0-slave: setting UDMA33 on Intel ICH6 chip
ad0: <FUJITSU MHU2100AT/00000008> ATA-6 disk at ata0-master
ad0: 95396MB (195371568 sectors), 193821 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA100
GEOM: new disk ad0
ar: FreeBSD check1 failed
[0] f:00 typ:18 s(CHS):0/1/1 e(CHS):653/254/63 s:63 l:10506447
[1] f:00 typ:7 s(CHS):654/0/1 e(CHS):1023/254/63 s:10506510 l:91136745
[2] f:80 typ:165 s(CHS):1023/255/63 e(CHS):1023/254/63 s:101643255
l:93723210
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s1, start 32256 length 5379300864 end 5379333119
GEOM: Configure ad0s2, start 5379333120 length 46662013440 end
52041346559
GEOM: Configure ad0s3, start 52041346560 length 47986283520 end
100027630079
[0] f:63 typ:114 s(CHS):368/111/45 e(CHS):371/101/51 s:218129509
l:1701990410
[1] f:73 typ:116 s(CHS):67/115/32 e(CHS):299/114/44 s:729050177
l:543974724
[2] f:74 typ:101 s(CHS):114/111/32 e(CHS):353/115/52 s:168653938 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:-1602027520 l:51635
acd0: <MATSHITAUJ-831Da/1.01> DVDR drive at ata0 as slave
acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s), 2048KB buffer,
UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes: CDR, CDRW, DVDR, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
[0] f:63 typ:114 s(CHS):368/111/45 e(CHS):371/101/51 s:218129509
l:1701990410
[1] f:73 typ:116 s(CHS):67/115/32 e(CHS):299/114/44 s:729050177
l:543974724
[2] f:74 typ:101 s(CHS):114/111/32 e(CHS):353/115/52 s:168653938 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:-1602027520 l:51635
GEOM: Configure ad0s3a, start 0 length 314572800 end 314572799
GEOM: Configure ad0s3b, start 314572800 length 2147483648 end 2462056447
GEOM: Configure ad0s3c, start 0 length 47986283520 end 47986283519
GEOM: Configure ad0s3d, start 2462056448 length 104857600 end 2566914047
GEOM: Configure ad0s3e, start 2566914048 length 524288000 end 3091202047
GEOM: Configure ad0s3f, start 3091202048 length 419430400 end 3510632447
GEOM: Configure ad0s3g, start 3510632448 length 44475651072 end
47986283519
[0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000
[0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000
[0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000
pcib1: device pccard0 requested decoded memory range
0xb0100000-0xb01fffff
pccard0: CIS version PCCARD 2.0 or 2.1
pccard0: CIS info: Linksys, EtherFast 10/100 PC Card (PCMPC100), 
pccard0: Manufacturer code 0x149, product 0xc1ab
pccard0: function 0: network adapter, ccr addr 400 mask 1
pccard0: function 0, config table entry 16: I/O card; irq mask befc;
iomask 5, iospace 0-1f; mwait_required io16 irqlevel
pccard0: function 0, config table entry 1: I/O card; irq mask befc;
iomask a, iospace 300-31f; mwait_required io16 irqlevel
pccard0: function 0, config table entry 2: I/O card; irq mask befc;
iomask a, iospace 320-33f; mwait_required io16 irqlevel
pccard0: function 0, config table entry 3: I/O card; irq mask befc;
iomask a, iospace 340-35f; mwait_required io16 irqlevel
pccard0: function 0, config table entry 4: I/O card; irq mask befc;
iomask a, iospace 380-39f; mwait_required io16 irqlevel
pccard0: function 0, config table entry 5: I/O card; irq mask befc;
iomask a, iospace 200-21f; mwait_required io16 irqlevel
pccard0: function 0, config table entry 6: I/O card; irq mask befc;
iomask a, iospace 220-23f; mwait_required io16 irqlevel
pccard0: function 0, config table entry 7: I/O card; irq mask befc;
iomask a, iospace 240-25f; mwait_required io16 irqlevel
pcib1: device pccard0 requested decoded I/O range 0x2000-0x2fff
pcib1: device pccard0 requested decoded memory range
0xb0100000-0xb01fffff
ed1: <Linksys EtherFast 10/100 PC Card (PCMPC100)> at port 0x2040-0x205f
irq 16 function 0 config 16 on pccard0
pcib1: device ed1 requested decoded I/O range 0x2040-0x205f
pcib1: device pccard0 requested decoded I/O range 0x2040-0x205f
pcib1: device ed1 requested decoded I/O range 0x2040-0x205f
ed1: [GIANT-LOCKED]
ed1: bpf attached
ed1: Ethernet address: 00:e0:98:06:32:7c
ed1: if_start running deferred for Giant
ed1: type DL10019 (16 bit) 
miibus0: <MII bus> on ed1
lxtphy0: <LXT970 10/100 media interface> on miibus0
lxtphy0:  100baseFX, 100baseFX-FDX, 10baseT, 10baseT-FDX, 100baseTX,
100baseTX-FDX, auto
(probe0:sbp0:0:0:0): error 22
(probe0:sbp0:0:0:0): Unretryable Error
(probe1:sbp0:0:1:0): error 22
(probe1:sbp0:0:1:0): Unretryable Error
(probe2:sbp0:0:2:0): error 22
(probe2:sbp0:0:2:0): Unretryable Error
(probe3:sbp0:0:3:0): error 22
(probe3:sbp0:0:3:0): Unretryable Error
(probe4:sbp0:0:4:0): error 22
(probe4:sbp0:0:4:0): Unretryable Error
(probe5:sbp0:0:5:0): error 22
(probe5:sbp0:0:5:0): Unretryable Error
(probe6:sbp0:0:6:0): error 22
(probe6:sbp0:0:6:0): Unretryable Error
ioapic0: routing intpin 1 (ISA IRQ 1) to cluster 0
ioapic0: routing intpin 8 (ISA IRQ 8) to cluster 0
ioapic0: routing intpin 9 (ISA IRQ 9) to cluster 0
ioapic0: routing intpin 12 (ISA IRQ 12) to cluster 0
ioapic0: routing intpin 13 (ISA IRQ 13) to cluster 0
ioapic0: routing intpin 14 (ISA IRQ 14) to cluster 0
ioapic0: routing intpin 15 (ISA IRQ 15) to cluster 0
ioapic0: routing intpin 16 (PCI IRQ 16) to cluster 0
ioapic0: routing intpin 18 (PCI IRQ 18) to cluster 0
ioapic0: routing intpin 19 (PCI IRQ 19) to cluster 0
ioapic0: routing intpin 23 (PCI IRQ 23) to cluster 0
Mounting root from ufs:/dev/ad0s3a
start_init: trying /sbin/init
acpi_ec0: info: new max delay is 11000 us


---- pciconf -lv ----
hostb0@pci0:0:0:	class=0x060000 card=0x81b7104d chip=0x25908086 rev=0x03
hdr=0x00
    vendor   = 'Intel Corporation'
    class    = bridge
    subclass = HOST-PCI
none0@pci0:2:0:	class=0x030000 card=0x81b8104d chip=0x25928086 rev=0x03
hdr=0x00
    vendor   = 'Intel Corporation'
    class    = display
    subclass = VGA
none1@pci0:2:1:	class=0x038000 card=0x81b8104d chip=0x27928086 rev=0x03
hdr=0x00
    vendor   = 'Intel Corporation'
    device   = 'Mobile Graphics Controller'
    class    = display
none2@pci0:27:0:	class=0x040300 card=0x81bb104d chip=0x26688086 rev=0x04
hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801FB/FR/FW/FRW Intel High Deficition Audio
Controller'
    class    = multimedia
uhci0@pci0:29:0:	class=0x0c0300 card=0x81b9104d chip=0x26588086 rev=0x04
hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801FB/FR/FW/FRW USB UHCI Controller'
    class    = serial bus
    subclass = USB
uhci1@pci0:29:1:	class=0x0c0300 card=0x81b9104d chip=0x26598086 rev=0x04
hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801FB/FR/FW/FRW USB UHCI Controller'
    class    = serial bus
    subclass = USB
uhci2@pci0:29:2:	class=0x0c0300 card=0x81b9104d chip=0x265a8086 rev=0x04
hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801FB/FR/FW/FRW USB UHCI Controller'
    class    = serial bus
    subclass = USB
uhci3@pci0:29:3:	class=0x0c0300 card=0x81b9104d chip=0x265b8086 rev=0x04
hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801FB/FR/FW/FRW USB UHCI Controller'
    class    = serial bus
    subclass = USB
none3@pci0:29:7:	class=0x0c0320 card=0x81b9104d chip=0x265c8086 rev=0x04
hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801FB/FR/FW/FRW USB 2.0 EHCI Controller'
    class    = serial bus
    subclass = USB
pcib1@pci0:30:0:	class=0x060401 card=0x00000050 chip=0x24488086 rev=0xd4
hdr=0x01
    vendor   = 'Intel Corporation'
    device   = '82801BAM/CAM/DBM (ICH2-M/3-M/4-M) Hub Interface to PCI
Bridge'
    class    = bridge
    subclass = PCI-PCI
isab0@pci0:31:0:	class=0x060100 card=0x81b9104d chip=0x26418086 rev=0x04
hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801FBM ICH6M LPC Interface Bridge'
    class    = bridge
    subclass = PCI-ISA
atapci0@pci0:31:1:	class=0x01018a card=0x81b9104d chip=0x266f8086
rev=0x04 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801FB ICH6 Ultra ATA Storage Controller'
    class    = mass storage
    subclass = ATA
none4@pci0:31:3:	class=0x0c0500 card=0x81b9104d chip=0x266a8086 rev=0x04
hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801FB/FR/FW/FRW SMBus Controller'
    class    = serial bus
    subclass = SMBus
cbb0@pci6:3:0:	class=0x060700 card=0x818f104d chip=0xac8e104c rev=0x00
hdr=0x02
    vendor   = 'Texas Instruments (TI)'
    class    = bridge
    subclass = PCI-CardBus
fwohci0@pci6:3:2:	class=0x0c0010 card=0x818f104d chip=0x802e104c
rev=0x00 hdr=0x00
    vendor   = 'Texas Instruments (TI)'
    class    = serial bus
    subclass = FireWire
none5@pci6:3:3:	class=0x018000 card=0x8190104d chip=0xac8f104c rev=0x00
hdr=0x00
    vendor   = 'Texas Instruments (TI)'
    class    = mass storage
none6@pci6:4:0:	class=0x028000 card=0x27518086 chip=0x42208086 rev=0x05
hdr=0x00
    vendor   = 'Intel Corporation'
    device   = 'PRO/Wireless 2200BG Network Connection'
    class    = network
none7@pci6:8:0:	class=0x020000 card=0x81d0104d chip=0x10688086 rev=0x04
hdr=0x00
    vendor   = 'Intel Corporation'
    class    = network
    subclass = ethernet




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1109826709.622.4.camel>