Date: Sat, 18 Apr 2009 21:08:25 +0200 From: Bernd Walter <ticso@cicely7.cicely.de> To: freebsd-arm@freebsd.org Cc: Bernd Walter <ticso@cicely7.cicely.de> Subject: no da* with umass on RM9200 Message-ID: <20090418190824.GC16463@cicely7.cicely.de>
next in thread | raw e-mail | index | archive | help
Just updated to recent current today - mainly to try the new USB code on RM9200. USB devices are detected fine, but with umass I don't get any disk devices, although support for pass and da is compiled into the kernel. I tried a few different umass flash reader, which are all know to work. ugen0.2: <Generic> at usbus0 umass0: <Generic USB Storage Device, class 0/0, rev 2.00/1.00, addr 2> on usbus0 umass0: SCSI over Bulk-Only; quirks = 0x0008 umass0:0:0:-1: Attached to scbus0 ugen0.2: <Generic> at usbus0 (disconnected) umass0: at uhub0, port 1, addr 2 (disconnected) ugen0.2: <Ralink> at usbus0 ugen0.2: <Ralink> at usbus0 (disconnected) ugen0.2: <Genesys Logic> at usbus0 uhub1: <Genesys Logic USB2.0 Hub, class 9/0, rev 2.00/7.02, addr 2> on usbus0 uhub1: 4 ports with 3 removable, self powered ugen0.3: <Genesys Logic> at usbus0 uhub2: <Genesys Logic USB2.0 Hub, class 9/0, rev 2.00/7.02, addr 3> on usbus0 uhub2: 4 ports with 4 removable, self powered ugen0.4: <Generic> at usbus0 umass0: <Generic USB Storage Device, class 0/0, rev 2.00/1.00, addr 4> on usbus0 umass0: SCSI over Bulk-Only; quirks = 0x0008 umass0:0:0:-1: Attached to scbus0 ugen0.5: <Prolific Technology Inc.> at usbus0 ulpt0: <Prolific Technology Inc. IEEE-1284 Controller, class 0/0, rev 1.00/2.02, addr 5> on usbus0 ulpt0: using bi-directional mode ulpt0: out of paper ugen0.6: <Alps Electric> at usbus0 ulpt1: <Alps Electric MD USB Cable, class 0/0, rev 1.00/2.00, addr 6> on usbus0 ulpt1: using bi-directional mode ulpt1: out of paper ugen0.7: <PQI> at usbus0 umass1: <SMC CF SD> on usbus0 umass1: SCSI over Bulk-Only; quirks = 0x0000 umass1:1:1:-1: Attached to scbus1 ugen0.8: <Generic> at usbus0 umass2: <Generic Mass Storage Device, class 0/0, rev 2.00/1.00, addr 8> on usbus0 umass2: SCSI over Bulk-Only; quirks = 0x0000 umass2:2:2:-1: Attached to scbus2 [111]arm-inst# usbconfig ugen0.1: <OHCI root HUB Atmel> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON ugen0.2: <USB2.0 Hub Genesys Logic> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE ugen0.3: <USB2.0 Hub Genesys Logic> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE ugen0.4: <USB Storage Device Generic> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON ugen0.5: <IEEE-1284 Controller Prolific Technology Inc.> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON ugen0.6: <MD USB Cable Alps Electric> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON ugen0.7: <Travel Flash PQI> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON ugen0.8: <Mass Storage Device Generic> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON Hubs are running :-) With the old USB including an early patch they did not. The umass problem however also exists without using a hub. [113]arm-inst# camcontrol devlist -v scbus0 on umass-sim0 bus 0: scbus1 on umass-sim1 bus 1: scbus2 on umass-sim2 bus 2: scbus-1 on xpt0 bus 0: < > at scbus-1 target -1 lun -1 (xpt0) On my i386 system running current it lists: [99]cicely13# camcontrol devlist -v scbus0 on ahc0 bus 0: < > at scbus0 target -1 lun -1 () scbus1 on umass-sim0 bus 0: <IC USB Storage-CFC 301b> at scbus1 target 0 lun 0 (da0,pass0) <IC USB Storage-SMC 301b> at scbus1 target 0 lun 1 (da1,pass1) <IC USB Storage-MMC 301b> at scbus1 target 0 lun 2 (da2,pass2) <IC USB Storage-MSC 301b> at scbus1 target 0 lun 3 (da3,pass3) scbus2 on umass-sim1 bus 1: <Generic USB SD Reader 1.00> at scbus2 target 0 lun 0 (da4,pass4) <Generic USB CF Reader 1.01> at scbus2 target 0 lun 1 (da5,pass5) <Generic USB xD/SM Reader 1.02> at scbus2 target 0 lun 2 (da6,pass6) <Generic USB MS Reader 1.03> at scbus2 target 0 lun 3 (da7,pass7) scbus-1 on xpt0 bus 0: < > at scbus-1 target -1 lun -1 (xpt0) bus 1 is the same device as bus 2 on the RM9200 list Maybe my kernel is missing a driver, but I'm not aware of any. -- B.Walter <bernd@bwct.de> http://www.bwct.de Modbus/TCP Ethernet I/O Baugruppen, ARM basierte FreeBSD Rechner uvm.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20090418190824.GC16463>