Date: Mon, 9 Oct 2000 13:59:04 +0000 (GMT) From: Rick Hamell <hamellr@heorot.1nova.com> To: mackan@markus.pp.se Cc: freebsd-questions@FreeBSD.org Subject: Re: Error while burning ATAPI CDR Message-ID: <Pine.BSF.4.21.0010091343030.10325-100000@heorot.1nova.com> In-Reply-To: <Pine.BSF.4.21.0010102149450.408-100000@nada.nix.rootpass.net>
next in thread | previous in thread | raw e-mail | index | archive | help
If your cache is too small you'll see this problem. Also, what was the machine doing at the time other then burning cd's? http://www.defcon1.org/html/Hardware_Articles/Zip-drive/Zip-Parallel/Wheel-Mouse/atapi.burning gives talks about the same problem and gives an alternate command that may help. Rick Rick's FreeBSD Help Site! http://www.1nova.com/freebsd Ace Logan's Hardware Guide http://www.shatteredcrystal.net/hardware ***FreeBSD - The Power to Serve! http://ww.freebsd.org On Tue, 10 Oct 2000 mackan@markus.pp.se wrote: > Hello, > > I'm trying to use the burncd program to burn cd's, but with > no success. The cd recorder is an IDE/ATAPI Acer CRW 6206A. > I'm using the 4.1.1-RELEASE. > > demesg tells me: > > acd1: CD-RW <CRW6206A> at ata1-slave using PIO4 > > burncd gives the following output: > > --- > nada# burncd -f /dev/acd1c -s 2 -e data 4.1.1-install.iso fixate > acd1: READ_TOC - ILLEGAL REQUEST asc=24 ascq=00 error=00 > Oct 10 20:54:49 nada /kernel: acd1: READ_TOC - ILLEGAL REQUEST > asc=24 ascq=00 error=00 > Oct 10 20:54:49 nada /kernel: acd1: READ_TOC - ILLEGAL REQUEST > asc=24 ascq=00 error=00 > next writeable LBA 0 > writing from file 4.1.1-install.iso size 656994 KB > --- > > The LED lights up at the device, and the drive starts writing > while counting the bytes. It stops at 100% and gives me this: > > --- > acd1: SYNCHRONIZE_CACHE command timeout - resetting > ata1: resetting devices .. ata1-slave: timeout waiting for > command=ef s=d0 e=50 done > ata1-slave: timeout waiting to give command=a0 s=d0 e=50 > acd1: failure to send ATAPI packet command > acd1: failure to execute ATAPI packet command > Oct 10 21:32:35 nada /kernel: acd1: SYNCHRONIZE_CACHE command > timeout - resetting > Oct 10 21:32:35 nada /kernel: acd1: SYNCHRONIZE_CACHE command > timeout - resetting > Oct 10 21:32:35 nada /kernel: ata1: resetting devices > .. ata1-slave: timeout waiting for command=ef s=d0 e=50 > Oct 10 21:32:35 nada /kernel: ata1: resetting devices > .. ata1-slave: timeout waiting for command=ef s=d0 e=50 > --- > > The messages above then repeats many times and slowing down > the system. > > Is there anyway og getting around those error? > > Any suggestions are welcome! > > Mackan > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.21.0010091343030.10325-100000>