Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 02 Mar 2012 07:31:21 -0500
From:      sean <tech.junk@myfairpoint.net>
To:        freebsd-questions@freebsd.org
Subject:   Re: USB Logitech QuickCam Ultra Vision
Message-ID:  <4F50BD99.7090509@myfairpoint.net>
In-Reply-To: <20120302060453.GA3506@tinyCurrent>
References:  <4F4FDB25.5020400@myfairpoint.net> <4F50139F.6050203@herveybayaustralia.com.au> <20120302054811.a72c89c8.dcdowse@gmx.net> <20120302060453.GA3506@tinyCurrent>

Next in thread | Previous in thread | Raw E-Mail | Index | Archive | Help
On 03/02/12 01:04, Matthias Apitz wrote:
> El día Friday, March 02, 2012 a las 05:48:11AM +0100, Daniel C. Dowse escribió:
>
>> Hi,
>>
>> usbconfig -d ugenX.Y do_request 0x22 0x01 0x100 0x86 0x03 0x80 0xBB 0x00
>> usbconfig -d ugenX.Y reset
>> usbconfig -d ugenX.Y do_request 0x22 0x01 0x100 0x86 0x03 0x80 0xBB 0x00
>>
>> and then restart webcamd.
>>
>> may help, it worked on my Logitech Business Pro Cam
>>
>> cheers
> FWHIW, such quirks are also shown in http://wiki.freebsd.org/WebcamCompat
> and once your webcam is working fine it could show up there too;
>
> HIH
>
> 	matthias
I have been using that page for help.
I just entered lsusb and the Quickcam Ultra reports different numbers 
alongside ugen then what is show reviewing dmesg or cat /dev/sndstat.
Is this the problem, the assigned numbers don't match?
If I run the usbconfig command with 4.2 instead of 1.0 at least I do not 
get the can't be found or does not exist reply.
Instead I get a generic "REQUEST = <ERROR>" message.
My camera is also not listed on that site.

tardis# whoami
root
tardis# lsusb
Bus /dev/usb Device /dev/ugen2.5: ID 050d:016a Belkin Components 
Bluetooth Mini Dongle
Bus /dev/usb Device /dev/ugen2.4: ID 0a5c:4503 Broadcom Corp.
Bus /dev/usb Device /dev/ugen2.3: ID 0a5c:4502 Broadcom Corp.
Bus /dev/usb Device /dev/ugen1.4: ID 047d:2048 Kensington
Bus /dev/usb Device /dev/ugen4.2: ID 046d:08c9 Logitech, Inc. QuickCam 
Ultra Vision
Bus /dev/usb Device /dev/ugen2.2: ID 0a5c:4500 Broadcom Corp. BCM2046B1 
USB 2.0 Hub (part of BCM2046 Bluetooth)
Bus /dev/usb Device /dev/ugen1.3: ID 046d:c315 Logitech, Inc. Classic 
New Touch Keyboard
Bus /dev/usb Device /dev/ugen1.2: ID 05e3:0608 Genesys Logic, Inc. 
USB-2.0 4-Port HUB
Bus /dev/usb Device /dev/ugen4.1: ID 0000:0000
Bus /dev/usb Device /dev/ugen3.1: ID 0000:0000
Bus /dev/usb Device /dev/ugen2.1: ID 0000:0000
Bus /dev/usb Device /dev/ugen1.1: ID 0000:0000
Bus /dev/usb Device /dev/ugen0.1: ID 0000:0000
tardis# usbconfig -d ugen4.2 do_request 0x22 0x01 0x100 0x86 0x03 0x80 
0xBB 0x00
REQUEST = <ERROR>
tardis# usbconfig -d ugen4.2 do_request 0x22 0x01 0x100 0x86 0x03 0x80 
0xBB 0x00
REQUEST = <ERROR>
tardis# dmesg | grep pcm
pcm0: <AMD-8111> port 0xc800-0xc8ff,0xcc00-0xcc3f irq 17 at device 7.5 
on pci0
pcm0: <Analog Devices AD1981B AC97 Codec>
pcm1: <USB audio> on uaudio0
tardis# cat /dev/sndstat
FreeBSD Audio Driver (newpcm: 64bit 2009061500/amd64)
Installed devices:
pcm0: <AMD-8111> (play/rec) default
pcm1: <USB audio> (rec)
tardis#





Want to link to this message? Use this URL: <http://docs.FreeBSD.org/cgi/mid.cgi?4F50BD99.7090509>