Date: Sat, 18 Sep 2004 22:40:46 -0400 From: Marc Ramirez <marc.ramirez@bluecirclesoft.com> To: freebsd-current@freebsd.org Subject: PCMCIA problems w/ 5.3 BETA 4 Message-ID: <200409182240.54337.marc.ramirez@bluecirclesoft.com>
next in thread | raw e-mail | index | archive | help
--nextPart6436094.xoKCao7NqO Content-Type: multipart/mixed; boundary="Boundary-01=_wGPTBHlLjAZS+1W" Content-Transfer-Encoding: 7bit Content-Disposition: inline --Boundary-01=_wGPTBHlLjAZS+1W Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Content-Disposition: inline Hello, FreeBSDers! I have a laptop, Toshiba 1415-S105. Just upgraded this weekend. In 5.3Beta 4, the PCMCIA is not recognized at all. No mention of it in the= =20 boot messages or anything. It worked in 4.10. The audio's having problems, and I've done some stuff to mess with that, as= =20 well, but I don't see that as a pressing issue. I've attached various outputs, my kernel file, the dmesg when I booted=20 verbose, pciconf -l -v, etc. I have no idea how to fix the problem, but I'll certainly be a guinea pig. Thanks! Marc. =2D-=20 Marc Ramirez Blue Circle Software Corporation 513-688-1070 (main) 513-382-1270 (direct) http://www.bluecirclesoft.com http://www.mrami.com (personal) --Boundary-01=_wGPTBHlLjAZS+1W Content-Type: text/plain; charset="us-ascii"; name="dmesg.output" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="dmesg.output" Waiting (max 60 seconds) for system process `vnlru' to stop...done Waiting (max 60 seconds) for system process `bufdaemon' to stop...done Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining...0 0 done No buffers busy after final sync Uptime: 14m47s Shutting down ACPI Rebooting... Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. =46reeBSD 5.3-BETA4 #1: Sat Sep 18 19:32:58 UTC 2004 root@laptop.ghostmrami.com:/usr/src/sys/i386/compile/LAPTOP Preloaded elf kernel "/boot/kernel/kernel" at 0xc0abc000. Preloaded elf module "/boot/kernel/snd_driver.ko" at 0xc0abc2e4. Preloaded elf module "/boot/kernel/snd_vibes.ko" at 0xc0abc394. Preloaded elf module "/boot/kernel/snd_via82c686.ko" at 0xc0abc444. Preloaded elf module "/boot/kernel/snd_via8233.ko" at 0xc0abc4f8. Preloaded elf module "/boot/kernel/snd_t4dwave.ko" at 0xc0abc5a8. Preloaded elf module "/boot/kernel/snd_solo.ko" at 0xc0abc658. Preloaded elf module "/boot/kernel/snd_sbc.ko" at 0xc0abc708. Preloaded elf module "/boot/kernel/snd_sb16.ko" at 0xc0abc7b4. Preloaded elf module "/boot/kernel/snd_sb8.ko" at 0xc0abc864. Preloaded elf module "/boot/kernel/snd_neomagic.ko" at 0xc0abc910. Preloaded elf module "/boot/kernel/snd_mss.ko" at 0xc0abc9c4. Preloaded elf module "/boot/kernel/snd_maestro3.ko" at 0xc0abca70. Preloaded elf module "/boot/kernel/snd_maestro.ko" at 0xc0abcb24. Preloaded elf module "/boot/kernel/snd_ich.ko" at 0xc0abcbd4. Preloaded elf module "/boot/kernel/snd_fm801.ko" at 0xc0abcc80. Preloaded elf module "/boot/kernel/snd_ess.ko" at 0xc0abcd30. Preloaded elf module "/boot/kernel/snd_es137x.ko" at 0xc0abcddc. Preloaded elf module "/boot/kernel/snd_emu10k1.ko" at 0xc0abce8c. Preloaded elf module "/boot/kernel/snd_ds1.ko" at 0xc0abcf3c. Preloaded elf module "/boot/kernel/snd_csa.ko" at 0xc0abcfe8. Preloaded elf module "/boot/kernel/snd_cs4281.ko" at 0xc0abd094. Preloaded elf module "/boot/kernel/snd_cmi.ko" at 0xc0abd144. Preloaded elf module "/boot/kernel/snd_als4000.ko" at 0xc0abd1f0. Preloaded elf module "/boot/kernel/snd_ad1816.ko" at 0xc0abd2a0. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0abd350. Calibrating clock(s) ... i8254 clock: 1193156 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 1594834964 Hz CPU: Mobile Intel(R) Celeron(R) CPU 1.60GHz (1594.83-MHz 686-class CPU) Origin =3D "GenuineIntel" Id =3D 0xf27 Stepping =3D 7 Features=3D0xbfebf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA= ,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> real memory =3D 268238848 (255 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000c29000 - 0x000000000fb20fff, 250576896 bytes (61176 pages) avail memory =3D 252755968 (241 MB) bios32: Found BIOS32 Service Directory header at 0xc00f0240 bios32: Entry =3D 0xfc04c (c00fc04c) Rev =3D 0 Len =3D 1 pcibios: PCI BIOS entry at 0xf0000+0xd4df pnpbios: Found PnP BIOS data at 0xc00f0440 pnpbios: Entry =3D f0000:9138 Rev =3D 1.0 pnpbios: Event flag at 510 pnpbios: OEM ID 1938f351 Other BIOS signatures found: wlan: <802.11 Link Layer> null: <null device, zero device> random: <entropy source, Software, Yarrow> io: <I/O> mem: <memory> Pentium Pro MTRR support enabled npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <TOSHIB 750> on motherboard pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000 pci_open(1a): mode1res=3D0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=3D060000] [hdr=3D00] is there (id=3D1a308086) pcibios: BIOS version 2.10 =46ound $PIR table, 8 entries at 0xc00f01a0 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs embedded 0 31 A 0x62 11 embedded 0 31 B 0x61 11 embedded 0 29 A 0x60 11 embedded 0 29 B 0x63 11 embedded 2 11 A 0x60 11 embedded 2 11 B 0x61 11 embedded 2 8 A 0x68 11 embedded 1 0 A 0x6a 10 embedded 2 10 A 0x6b 11 embedded 2 10 B 0x69 11 embedded 2 7 A 0x69 11 embedded 2 13 A 0x60 11 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 30 func 0 acpi0: [MPSAFE] acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 31 func 0 acpi0: Power Button (fixed) ACPI timer looks GOOD min =3D 3, max =3D 4, width =3D 1 ACPI timer looks GOOD min =3D 3, max =3D 4, width =3D 1 ACPI timer looks GOOD min =3D 3, max =3D 4, width =3D 1 ACPI timer looks GOOD min =3D 3, max =3D 4, width =3D 1 ACPI timer looks GOOD min =3D 3, max =3D 4, width =3D 1 ACPI timer looks GOOD min =3D 3, max =3D 4, width =3D 1 ACPI timer looks GOOD min =3D 3, max =3D 4, width =3D 1 ACPI timer looks GOOD min =3D 3, max =3D 4, width =3D 1 ACPI timer looks GOOD min =3D 3, max =3D 4, width =3D 1 ACPI timer looks GOOD min =3D 3, max =3D 4, width =3D 1 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0xee08-0xee0b on acpi0 mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) cpu0: <ACPI CPU (3 Cx states)> port 0x530-0x537 on acpi0 mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) acpi_tz0: <Thermal Zone> port 0x530-0x537 on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 ACPI PCI link initial configuration: \\_SB_.LNKC irq 0: [ 3 4 5 7 11] 11+ low,level,sharable 0.31.0 \\_SB_.LNKB irq 0: [ 3 4 5 7 11] 11+ low,level,sharable 0.31.1 \\_SB_.LNKA irq 0: [ 3 4 5 7 11] 11+ low,level,sharable 0.29.0 \\_SB_.LNKD irq 0: [ 3 4 5 7 11] 11+ low,level,sharable 0.29.1 pci0: <ACPI PCI bus> on pcib0 pci0: physical bus=3D0 map[10]: type 3, range 32, base f0000000, size 27, enabled found-> vendor=3D0x8086, dev=3D0x1a30, revid=3D0x05 bus=3D0, slot=3D0, func=3D0 class=3D06-00-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0006, statreg=3D0x2090, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x8086, dev=3D0x1a31, revid=3D0x05 bus=3D0, slot=3D1, func=3D0 class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0 cmdreg=3D0x0007, statreg=3D0x00a0, cachelnsz=3D0 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x08 (2000 ns), maxlat=3D0x00 (0 ns) map[20]: type 4, range 32, base 0000efe0, size 5, enabled pcib0: matched entry for 0.29.INTA (src \\_SB_.LNKA) pcib0: possible interrupts: 3 4 5 7 11 ACPI PCI link arbitrated settings: \\_SB_.LNKC (references 1, priority 3050): interrupts: 11 5 7 4 3 penalty: 40 90 5040 5040 5040 \\_SB_.LNKB (references 1, priority 3050): interrupts: 11 5 7 4 3 penalty: 40 90 5040 5040 5040 \\_SB_.LNKA (references 1, priority 3050): interrupts: 11 5 7 4 3 penalty: 40 90 5040 5040 5040 \\_SB_.LNKD (references 1, priority 3050): interrupts: 11 5 7 4 3 penalty: 40 90 5040 5040 5040 pcib0: slot 29 INTA routed to irq 11 via \\_SB_.LNKA found-> vendor=3D0x8086, dev=3D0x2482, revid=3D0x02 bus=3D0, slot=3D29, func=3D0 class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D11 map[20]: type 4, range 32, base 0000ef80, size 5, enabled pcib0: matched entry for 0.29.INTB (src \\_SB_.LNKD) pcib0: possible interrupts: 3 4 5 7 11 ACPI PCI link arbitrated settings: \\_SB_.LNKC (references 1, priority 3092): interrupts: 11 5 7 4 3 penalty: 90 130 5080 5080 5080 \\_SB_.LNKB (references 1, priority 3092): interrupts: 11 5 7 4 3 penalty: 90 130 5080 5080 5080 \\_SB_.LNKD (references 1, priority 3092): interrupts: 11 5 7 4 3 penalty: 90 130 5080 5080 5080 pcib0: slot 29 INTB routed to irq 11 via \\_SB_.LNKD found-> vendor=3D0x8086, dev=3D0x2484, revid=3D0x02 bus=3D0, slot=3D29, func=3D1 class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Db, irq=3D11 found-> vendor=3D0x8086, dev=3D0x2448, revid=3D0x42 bus=3D0, slot=3D30, func=3D0 class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0 cmdreg=3D0x0007, statreg=3D0x0080, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x8086, dev=3D0x248c, revid=3D0x02 bus=3D0, slot=3D31, func=3D0 class=3D06-01-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x000f, statreg=3D0x0280, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) map[20]: type 4, range 32, base 0000cfa0, size 4, enabled pcib0: matched entry for 0.31.INTA (src \\_SB_.LNKC) pcib0: possible interrupts: 3 4 5 7 11 ACPI PCI link arbitrated settings: \\_SB_.LNKC (references 1, priority 3134): interrupts: 11 5 7 4 3 penalty: 140 170 5120 5120 5120 \\_SB_.LNKB (references 1, priority 3134): interrupts: 11 5 7 4 3 penalty: 140 170 5120 5120 5120 pcib0: slot 31 INTA routed to irq 11 via \\_SB_.LNKC found-> vendor=3D0x8086, dev=3D0x248a, revid=3D0x02 bus=3D0, slot=3D31, func=3D1 class=3D01-01-8a, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0007, statreg=3D0x0280, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D11 map[10]: type 4, range 32, base 0000ce00, size 8, enabled map[14]: type 4, range 32, base 0000cdc0, size 6, enabled pcib0: matched entry for 0.31.INTB (src \\_SB_.LNKB) pcib0: possible interrupts: 3 4 5 7 11 ACPI PCI link arbitrated settings: \\_SB_.LNKB (references 1, priority 3176): interrupts: 11 5 7 4 3 penalty: 190 210 5160 5160 5160 pcib0: slot 31 INTB routed to irq 11 via \\_SB_.LNKB found-> vendor=3D0x8086, dev=3D0x2485, revid=3D0x02 bus=3D0, slot=3D31, func=3D5 class=3D04-01-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Db, irq=3D11 map[10]: type 4, range 32, base 0000ca00, size 8, enabled map[14]: type 4, range 32, base 0000c980, size 7, enabled pcib0: matched entry for 0.31.INTB (src \\_SB_.LNKB) pcib0: slot 31 INTB is already routed to irq 11 found-> vendor=3D0x8086, dev=3D0x2486, revid=3D0x02 bus=3D0, slot=3D31, func=3D6 class=3D07-03-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Db, irq=3D11 agp0: <Intel 82845 host to AGP bridge> mem 0xf0000000-0xf7ffffff at device = 0.0 on pci0 agp0: Reserved 0x8000000 bytes for rid 0x10 type 3 at 0xf0000000 agp0: allocating GATT for aperture of size 128M pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xf000-0xfff pcib1: memory decode 0xfd000000-0xfdffffff pcib1: prefetched decode 0xebf00000-0xefffffff ACPI PCI link initial configuration: \\_SB_.LNKG irq 0: [10] 10+ low,level,sharable 1.0.0 pci1: <ACPI PCI bus> on pcib1 pci1: physical bus=3D1 map[10]: type 1, range 32, base fd000000, size 24, enabled pcib1: device (null) requested decoded memory range 0xfd000000-0xfdffffff map[14]: type 3, range 32, base ec000000, size 26, enabled pcib1: device (null) requested decoded memory range 0xec000000-0xefffffff map[18]: type 3, range 32, base ebf80000, size 19, enabled pcib1: device (null) requested decoded memory range 0xebf80000-0xebffffff pcib1: matched entry for 1.0.INTA (src \\_SB_.LNKG) pcib1: possible interrupts: 10 ACPI PCI link arbitrated settings: \\_SB_.LNKG (references 1, priority 20): interrupts: 10 penalty: 20 pcib1: slot 0 INTA routed to irq 10 via \\_SB_.LNKG found-> vendor=3D0x10de, dev=3D0x0175, revid=3D0xa3 bus=3D1, slot=3D0, func=3D0 class=3D03-00-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0007, statreg=3D0x02b0, cachelnsz=3D0 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x05 (1250 ns), maxlat=3D0x01 (250 ns) intpin=3Da, irq=3D10 powerspec 2 supports D0 D3 current D0 pci1: <display, VGA> at device 0.0 (no driver attached) uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0xefe0-0xefff i= rq 11 at device 29.0 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xefe0 uhci0: [GIANT-LOCKED] usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0xef80-0xef9f i= rq 11 at device 29.1 on pci0 uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xef80 uhci1: [GIANT-LOCKED] usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pcib2: secondary bus 2 pcib2: subordinate bus 5 pcib2: I/O decode 0xd000-0xdfff pcib2: memory decode 0xfce00000-0xfcefffff pcib2: prefetched decode 0xfff00000-0xfffff pcib2: Subtractively decoded bridge. ACPI PCI link initial configuration: \\_SB_.LNKA irq*11: [ 3 4 5 7 11] 11+ low,level,sharable 2.11.0 \\_SB_.LNKB irq*11: [ 3 4 5 7 11] 11+ low,level,sharable 2.11.1 \\_SB_.LNKE irq 0: [ 3 4 5 7 11] 11+ low,level,sharable 2.8.0 \\_SB_.LNKH irq 0: [ 3 4 5 7 11] 11+ low,level,sharable 2.10.0 \\_SB_.LNKF irq 0: [ 3 4 5 7 11] 11+ low,level,sharable 2.10.1 \\_SB_.LNKF irq 0: [ 3 4 5 7 11] 11+ low,level,sharable 2.7.0 \\_SB_.LNKA irq*11: [ 3 4 5 7 11] 11+ low,level,sharable 2.13.0 pci2: <ACPI PCI bus> on pcib2 pci2: physical bus=3D2 map[10]: type 1, range 32, base fceff000, size 12, enabled pcib2: device (null) requested decoded memory range 0xfceff000-0xfcefffff map[14]: type 4, range 32, base 0000df40, size 6, enabled pcib2: device (null) requested decoded I/O range 0xdf40-0xdf7f pcib2: matched entry for 2.8.INTA (src \\_SB_.LNKE) pcib2: possible interrupts: 3 4 5 7 11 ACPI PCI link arbitrated settings: \\_SB_.LNKF (references 2, priority 6636): interrupts: 11 5 7 4 3 penalty: 340 350 5300 5300 5300 \\_SB_.LNKE (references 1, priority 3318): interrupts: 11 5 7 4 3 penalty: 340 350 5300 5300 5300 \\_SB_.LNKH (references 1, priority 3318): interrupts: 11 5 7 4 3 penalty: 340 350 5300 5300 5300 pcib2: slot 8 INTA routed to irq 11 via \\_SB_.LNKE found-> vendor=3D0x8086, dev=3D0x1031, revid=3D0x42 bus=3D2, slot=3D8, func=3D0 class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0007, statreg=3D0x0290, cachelnsz=3D8 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x08 (2000 ns), maxlat=3D0x38 (14000 n= s) intpin=3Da, irq=3D11 powerspec 2 supports D0 D1 D2 D3 current D0 fxp0: <Intel 82801CAM (ICH3) Pro/100 VE Ethernet> port 0xdf40-0xdf7f mem 0x= fceff000-0xfcefffff irq 11 at device 8.0 on pci2 fxp0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfceff000 fxp0: using memory space register mapping fxp0: PCI IDs: 8086 1031 1179 0001 0042 fxp0: Dynamic Standby mode is disabled miibus0: <MII bus> on fxp0 inphy0: <i82562ET 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: bpf attached fxp0: Ethernet address: 00:08:0d:05:70:0b fxp0: [MPSAFE] isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH3 UDMA100 controller> port 0xcfa0-0xcfaf,0x376,0x170-0x1= 77,0x3f6,0x1f0-0x1f7 irq 11 at device 31.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xcfa0 ata0: channel #0 on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D00 ata0-master: stat=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00 ata0-slave: stat=3D0x00 err=3D0x01 lsb=3D0x00 msb=3D0x00 ata0: reset tp2 stat0=3D50 stat1=3D00 devices=3D0x1<ATA_MASTER> ata0: [MPSAFE] ata1: channel #1 on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D00 ata1-master: stat=3D0x00 err=3D0x01 lsb=3D0x14 msb=3D0xeb ata1-slave: stat=3D0x00 err=3D0x04 lsb=3D0x00 msb=3D0x00 ata1: reset tp2 stat0=3D00 stat1=3D00 devices=3D0x4<ATAPI_MASTER> ata1: [MPSAFE] pcm0: <Intel ICH3 (82801CA)> port 0xcdc0-0xcdff,0xce00-0xceff irq 11 at dev= ice 31.5 on pci0 pcm0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xce00 pcm0: Reserved 0x40 bytes for rid 0x14 type 4 at 0xcdc0 pcm0: [GIANT-LOCKED] pcm0: <Yamaha YMF753 AC97 Codec (id =3D 0x594d4803)> pcm0: Codec features 18 bit DAC, 5 bit master volume, no 3D Stereo Enhancem= ent pcm0: Primary codec extended features reserved 1, AMAP, reserved 4 pcm0: sndbuf_setmap f724000, 4000; 0xd49cd000 -> f724000 pcm0: sndbuf_setmap f70f000, 4000; 0xd49d1000 -> f70f000 pci0: <simple comms> at device 31.6 (no driver attached) unknown: not probed (disabled) acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_cmbat0: <Control Method Battery> on acpi0 acpi_acad0: <AC Adapter> on acpi0 mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 atkbd0: [GIANT-LOCKED] psm0: unable to allocate IRQ psmcpnp0 irq 12 on acpi0 psm0: current command byte:0047 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model GlidePoint, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000008, packet size:3 psm0: syncmask:c0, syncbits:00 unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) ppc0: using extended I/O port range ppc0: ECP SPP ECP+EPP SPP ppc0 port 0x778-0x77a,0x378-0x37a irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/15 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 plip0: bpf attached lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 unknown: not probed (disabled) unknown: not probed (disabled) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) unknown: not probed (disabled) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) ex_isa_identify() ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it ppc: ppc0 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff ahc_isa_probe 14: ioport 0xec00 alloc failed sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <ISA Option ROMs> at iomem 0xe0000-0xeffff,0xc0000-0xcffff on isa0 pmtimer0 on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fdc0: ready for input in output fdc0: cmd 3 failed at out byte 1 of 3 fdc0 failed to probe at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0 fe0: not probed (disabled) ie0: not probed (disabled) lnc0: not probed (disabled) pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic1: not probed (disabled) sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=3D0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: irq maps: 0x201 0x201 0x201 0x201 sio0: probe failed test(s): 0 1 2 4 6 7 9 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 or not responding sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0x201 0x201 0x201 0x201 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k vga0: vga: WARNING: video mode switching is not fully supported on this ada= pter VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 54 80=20 bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96=20 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c=20 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff=20 VGA parameters in BIOS for mode 24 08 08 08 0f 00 00 00 00 08 08 08 ff 00 00 00 00=20 00 00 00 ff 08 08 08 08 08 08 08 0f 08 08 08 08=20 00 00 00 ff 00 00 00 00 08 08 08 ff 08 08 08 08=20 08 08 0f 08 0f 08 08 08 14 14 14 17 14 14 14 14=20 EGA/VGA parameters to be used for mode 24 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 54 80=20 bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96=20 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c=20 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff=20 vt0: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. procfs registered Timecounter "TSC" frequency 1594834964 Hz quality 800 Timecounters tick every 10.000 msec WARNING: apm_saver module requires apm enabled splash: image decoder found: apm_saver lo0: bpf attached acpi_cmbat0: battery initialization start acpi_cmbat0: battery initialization done, tried 1 times acpi_acad0: acline initialization start acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times ata0-master: pio=3D0x0c wdma=3D0x22 udma=3D0x45 cable=3D80pin ata0-master: setting PIO4 on Intel ICH3 chip ata0-master: setting UDMA100 on Intel ICH3 chip ad0: <TOSHIBA MK2018GAS/Q2.03 E> ATA-5 disk at ata0-master ad0: 19077MB (39070080 sectors), 38760 C, 16 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, UDMA100 GEOM: new disk ad0 ar: FreeBSD check1 failed ata1-master: pio=3D0x0c wdma=3D0x22 udma=3D0x42 cable=3D40pin ATAPI_RESET time =3D 80us ata1-master: setting PIO4 on Intel ICH3 chip ata1-master: setting UDMA33 on Intel ICH3 chip acd0: <DW-224E/7.0A> CDRW drive at ata1 as master acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s), 1658KB buffer, UD= MA33 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet acd0: Writes: CDR, CDRW, test write acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc pcm0: measured ac97 link rate at 48000 Hz [0] f:00 typ:7 s(CHS):0/1/1 e(CHS):1023/10/63 s:63 l:16787862 [1] f:80 typ:165 s(CHS):1023/255/63 e(CHS):1023/15/63 s:16787925 l:22282155 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad0s1, start 32256 length 8595385344 end 8595417599 GEOM: Configure ad0s2, start 8595417600 length 11408463360 end 20003880959 GEOM: Configure ad0s2a, start 734003200 length 10674460160 end 11408463359 GEOM: Configure ad0s2b, start 0 length 734003200 end 734003199 GEOM: Configure ad0s2c, start 0 length 11408463360 end 11408463359 Mounting root from ufs:/dev/ad0s2a start_init: trying /sbin/init Linux ELF exec handler installed linprocfs registered --Boundary-01=_wGPTBHlLjAZS+1W Content-Type: text/plain; charset="us-ascii"; name="LAPTOP" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="LAPTOP" # # GENERIC -- Generic kernel configuration file for FreeBSD/i386 # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD: src/sys/i386/conf/GENERIC,v 1.413.2.4 2004/09/11 04:28:39 scottl Exp $ machine i386 cpu I486_CPU cpu I586_CPU cpu I686_CPU ident GENERIC # To statically compile in device wiring instead of /boot/device.hints #hints "GENERIC.hints" # Default places to look for devices. options SCHED_4BSD # 4BSD scheduler options INET # InterNETworking options INET6 # IPv6 communications protocols options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options MD_ROOT # MD is a potential root device options NFSCLIENT # Network Filesystem Client options NFSSERVER # Network Filesystem Server options NFS_ROOT # NFS usable as /, requires NFSCLIENT options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options GEOM_GPT # GUID Partition Tables. options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!] options COMPAT_FREEBSD4 # Compatible with FreeBSD4 options SCSI_DELAY=15000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev options AHC_REG_PRETTY_PRINT # Print register bitfields in debug # output. Adds ~128k to driver. options AHD_REG_PRETTY_PRINT # Print register bitfields in debug # output. Adds ~215k to driver. options PFIL_HOOKS # pfil(9) framework options ADAPTIVE_GIANT # Giant mutex is adaptive. # To make an SMP kernel, the next two are needed options SMP # Symmetric MultiProcessor Kernel device apic # I/O APIC # Bus support. Do not remove isa, even if you have no isa slots device isa device eisa device pci # Floppy drives device fdc # ATA and ATAPI devices device ata device atadisk # ATA disk drives device ataraid # ATA RAID drives device atapicd # ATAPI CDROM drives device atapifd # ATAPI floppy drives device atapist # ATAPI tape drives options ATA_STATIC_ID # Static device numbering device atapicam # SCSI Controllers device ahb # EISA AHA1742 family device ahc # AHA2940 and onboard AIC7xxx devices device ahd # AHA39320/29320 and onboard AIC79xx devices device amd # AMD 53C974 (Tekram DC-390(T)) device isp # Qlogic family device mpt # LSI-Logic MPT-Fusion #device ncr # NCR/Symbios Logic device sym # NCR/Symbios Logic (newer chipsets + those of `ncr') device trm # Tekram DC395U/UW/F DC315U adapters device adv # Advansys SCSI adapters device adw # Advansys wide SCSI adapters device aha # Adaptec 154x SCSI adapters device aic # Adaptec 15[012]x SCSI adapters, AIC-6[23]60. device bt # Buslogic/Mylex MultiMaster SCSI adapters device ncv # NCR 53C500 device nsp # Workbit Ninja SCSI-3 device stg # TMC 18C30/18C50 # SCSI peripherals device scbus # SCSI bus (required for SCSI) device ch # SCSI media changers device da # Direct Access (disks) device sa # Sequential Access (tape etc) device cd # CD device pass # Passthrough device (direct SCSI access) device ses # SCSI Environmental Services (and SAF-TE) # RAID controllers interfaced to the SCSI subsystem device amr # AMI MegaRAID device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID device ciss # Compaq Smart RAID 5* device dpt # DPT Smartcache III, IV - See NOTES for options device iir # Intel Integrated RAID device ips # IBM (Adaptec) ServeRAID device mly # Mylex AcceleRAID/eXtremeRAID device twa # 3ware 9000 series PATA/SATA RAID # RAID controllers device aac # Adaptec FSA RAID device aacp # SCSI passthrough for aac (requires CAM) device ida # Compaq Smart RAID device mlx # Mylex DAC960 family device pst # Promise Supertrak SX6000 device twe # 3ware ATA RAID # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc # AT keyboard controller device atkbd # AT keyboard device psm # PS/2 mouse device vga # VGA video card driver device splash # Splash screen and screen saver support # syscons is the default console driver, resembling an SCO console device sc # Enable this for the pcvt (VT220 compatible) console driver #device vt #options XSERVER # support for X server on a vt console #options FAT_CURSOR # start with block cursor device agp # support several AGP chipsets # Floating point support - do not disable. device npx # Power management support (see NOTES for more options) device apm_saver # Requires APM device apm # Add suspend/resume support for the i8254. device pmtimer # PCCARD (pcmcia) support # PCMCIA and cardbus bridge support device cbb # cardbus (yenta) bridge device pccard # PC Card (16-bit) bus device cardbus # CardBus (32-bit) bus # Serial (COM) ports device sio # 8250, 16[45]50 based serial ports # Parallel port device ppc device ppbus # Parallel port bus (required) device lpt # Printer device plip # TCP/IP over parallel device ppi # Parallel port interface device #device vpo # Requires scbus and da # If you've got a "dumb" serial or parallel PCI card that is # supported by the puc(4) glue driver, uncomment the following # line to enable it (connects to the sio and/or ppc drivers): #device puc # PCI Ethernet NICs. device de # DEC/Intel DC21x4x (``Tulip'') device em # Intel PRO/1000 adapter Gigabit Ethernet Card device ixgb # Intel PRO/10GbE Ethernet Card device txp # 3Com 3cR990 (``Typhoon'') device vx # 3Com 3c590, 3c595 (``Vortex'') # PCI Ethernet NICs that use the common MII bus controller code. # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs! device miibus # MII bus support device bfe # Broadcom BCM440x 10/100 Ethernet device bge # Broadcom BCM570xx Gigabit Ethernet device dc # DEC/Intel 21143 and various workalikes device fxp # Intel EtherExpress PRO/100B (82557, 82558) device pcn # AMD Am79C97x PCI 10/100 (precedence over 'lnc') device re # RealTek 8139C+/8169/8169S/8110S device rl # RealTek 8129/8139 device sf # Adaptec AIC-6915 (``Starfire'') device sis # Silicon Integrated Systems SiS 900/SiS 7016 device sk # SysKonnect SK-984x & SK-982x gigabit Ethernet device ste # Sundance ST201 (D-Link DFE-550TX) device ti # Alteon Networks Tigon I/II gigabit Ethernet device tl # Texas Instruments ThunderLAN device tx # SMC EtherPower II (83c170 ``EPIC'') device vr # VIA Rhine, Rhine II device wb # Winbond W89C840F device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') # ISA Ethernet NICs. pccard NICs included. device cs # Crystal Semiconductor CS89x0 NIC # 'device ed' requires 'device miibus' device ed # NE[12]000, SMC Ultra, 3c503, DS8390 cards device ex # Intel EtherExpress Pro/10 and Pro/10+ device ep # Etherlink III based cards device fe # Fujitsu MB8696x based cards device ie # EtherExpress 8/16, 3C507, StarLAN 10 etc. device lnc # NE2100, NE32-VL Lance Ethernet cards device sn # SMC's 9000 series of Ethernet chips device xe # Xircom pccard Ethernet # ISA devices that use the old ISA shims #device le # Wireless NIC cards device wlan # 802.11 support device an # Aironet 4500/4800 802.11 wireless NICs. device awi # BayStack 660 and others device wi # WaveLAN/Intersil/Symbol 802.11 wireless NICs. #device wl # Older non 802.11 Wavelan wireless NIC. # Pseudo devices. device loop # Network loopback device mem # Memory and kernel memory devices device io # I/O device device random # Entropy device device ether # Ethernet support device sl # Kernel SLIP device ppp # Kernel PPP device tun # Packet tunnel. device pty # Pseudo-ttys (telnet etc) device md # Memory "disks" device gif # IPv6 and IPv4 tunneling device faith # IPv6-to-IPv4 relaying (translation) # The `bpf' device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! device bpf # Berkeley packet filter # USB support device uhci # UHCI PCI->USB interface device ohci # OHCI PCI->USB interface device usb # USB Bus (required) #device udbp # USB Double Bulk Pipe devices device ugen # Generic device uhid # "Human Interface Devices" device ukbd # Keyboard device ulpt # Printer device umass # Disks/Mass storage - Requires scbus and da device ums # Mouse device urio # Diamond Rio 500 MP3 player device uscanner # Scanners # USB Ethernet, requires mii device aue # ADMtek USB Ethernet device axe # ASIX Electronics USB Ethernet device cue # CATC USB Ethernet device kue # Kawasaki LSI USB Ethernet device rue # RealTek RTL8150 USB Ethernet # FireWire support device firewire # FireWire bus code device sbp # SCSI over FireWire (Requires scbus and da) device fwe # Ethernet over FireWire (non-standard!) device sound --Boundary-01=_wGPTBHlLjAZS+1W Content-Type: text/plain; charset="us-ascii"; name="loader.conf" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="loader.conf" snd_driver_load="YES" pccard_load="YES" cardbus_load="YES" apm_load="YES" --Boundary-01=_wGPTBHlLjAZS+1W Content-Type: text/plain; charset="us-ascii"; name="pnpinfo.output" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="pnpinfo.output" Checking for Plug-n-Play devices... No Plug-n-Play devices were found --Boundary-01=_wGPTBHlLjAZS+1W Content-Type: text/plain; charset="us-ascii"; name="uname.output" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="uname.output" FreeBSD laptop.ghostmrami.com 5.3-BETA4 FreeBSD 5.3-BETA4 #1: Sat Sep 18 19:32:58 UTC 2004 root@laptop.ghostmrami.com:/usr/src/sys/i386/compile/LAPTOP i386 --Boundary-01=_wGPTBHlLjAZS+1W-- --nextPart6436094.xoKCao7NqO Content-Type: application/pgp-signature -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.6 (FreeBSD) iD8DBQBBTPG2g1EgpGw750IRAm4NAJ9pFdCgzAAMOPyRz15mLUBjijTmTQCgg0+E Mn87FZ2VveibZUl3DQnLtyQ= =Gz1c -----END PGP SIGNATURE----- --nextPart6436094.xoKCao7NqO--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200409182240.54337.marc.ramirez>