Date: Tue, 18 Apr 2006 09:34:03 GMT From: Kirill Yelizarov <ykirill@yahoo.com> To: freebsd-gnats-submit@FreeBSD.org Subject: misc/95993: Cyrix 5530 unable to map interrupt Message-ID: <200604180934.k3I9Y3BP021503@www.freebsd.org> Resent-Message-ID: <200604180940.k3I9eMD7034825@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 95993 >Category: misc >Synopsis: Cyrix 5530 unable to map interrupt >Confidential: no >Severity: non-critical >Priority: low >Responsible: freebsd-bugs >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Tue Apr 18 09:40:22 GMT 2006 >Closed-Date: >Last-Modified: >Originator: Kirill Yelizarov >Release: FreeBSD 6.0 RELEASE >Organization: home >Environment: Installed from CD FreeBSD 6.0 RELEASE, I can't run uname because system hangs before login >Description: I installed system on another computer and then plugged harddrive to singleplate PC (Advantech). System hangs just after it starts to mount root. I tried with or without ACPI. I managed to start in single mode but system hangs right after i tried to mount filesystem. Here is dmesg which i managed to get via serial console Here is part of dmesg with ACPI enabled Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.0-RELEASE #0: Thu Nov 3 09:36:13 UTC 2005 root@x64.samsco.home:/usr/obj/usr/src/sys/GENERIC Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Cyrix GXm (299.24-MHz 586-class CPU) Origin = "CyrixInstead" Id = 0x540 DIR=0x8244 Stepping=8 Revision=2 real memory = 133169152 (127 MB) avail memory = 120770560 (115 MB) ACPI-0159: *** Error: AcpiLoadTables: Could not get RSDP, AE_NO_ACPI_TABLES ACPI-0213: *** Error: AcpiLoadTables: Could not load tables: AE_NO_ACPI_TABLES ACPI: table load failed: AE_NO_ACPI_TABLES npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface cpu0 on motherboard pcib0: <Host to PCI bridge> pcibus 0 on motherboard pir0: <PCI Interrupt Routing Table: 2 Entries> on motherboard pci0: <PCI bus> on pcib0 the rest is the same as without ACPI This one without ACPI Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.0-RELEASE #0: Thu Nov 3 09:36:13 UTC 2005 root@x64.samsco.home:/usr/obj/usr/src/sys/GENERIC Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Cyrix GXm (299.24-MHz 586-class CPU) Origin = "CyrixInstead" Id = 0x540 DIR=0x8244 Stepping=8 Revision=2 real memory = 133169152 (127 MB) avail memory = 120786944 (115 MB) npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface cpu0 on motherboard pcib0: <Host to PCI bridge> pcibus 0 on motherboard pir0: <PCI Interrupt Routing Table: 3 Entries> on motherboard pci0: <PCI bus> on pcib0 fxp0: <Intel 82559ER Embedded 10/100 Ethernet> port 0xe000-0xe03f mem 0xe2040000 -0xe2040fff,0xe2020000-0xe203ffff irq 11 at device 11.0 on pci0 miibus0: <MII bus> on fxp0 inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: Ethernet address: 00:0b:ab:06:19:9a fxp1: <Intel 82559ER Embedded 10/100 Ethernet> port 0xe400-0xe43f mem 0xe2041000 -0xe2041fff,0xe2000000-0xe201ffff irq 10 at device 12.0 on pci0 miibus1: <MII bus> on fxp1 inphy1: <i82555 10/100 media interface> on miibus1 inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp1: Ethernet address: 00:0b:ab:06:19:99 isab0: <PCI-ISA bridge> at device 18.0 on pci0 isa0: <ISA bus> on isab0 pci0: <bridge> at device 18.1 (no driver attached) atapci0: <Cyrix 5530 ATA33 controller> port 0xf000-0xf00f at device 18.2 on pci0 atapci0: unable to map interrupt ata2: <ATA channel 0> on atapci0 device_attach: ata2 attach returned 6 pci0: <multimedia, audio> at device 18.3 (no driver attached) pci0: <display, VGA> at device 18.4 (no driver attached) ohci0: <OHCI (generic) USB controller> mem 0xe2045000-0xe2045fff irq 11 at devic e 19.0 on pci0 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: (0x0e11) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pmtimer0 on isa0 orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff on isa0 ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0 ata1 at port 0x170-0x177,0x376 irq 15 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A, console sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 unknown: <PNP0303> can't assign resources (port) unknown: <PNP0c01> can't assign resources (memory) unknown: <PNP0501> can't assign resources (port) unknown: <PNP0400> can't assign resources (port) unknown: <PNP0501> can't assign resources (port) Timecounter "TSC" frequency 299237422 Hz quality 800 Timecounters tick every 1.000 msec ad0: 38154MB <HTS541040G9AT00 MB2OA60A> at ata0-master PIO4 Trying to mount root from ufs:/dev/ad0s2a I can provide with other information if necessary >How-To-Repeat: Single plate PC Advantech PCM-5823-G0A2 FreeBSD 6.0 RELEASE >Fix: Not known >Release-Note: >Audit-Trail: >Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200604180934.k3I9Y3BP021503>