Date: Thu, 25 Feb 2010 14:59:57 -0600 From: Brandon Gooch <jamesbrandongooch@gmail.com> To: Marwan Sultan <dead_line@hotmail.com> Cc: FreeBSD Questions <freebsd-questions@freebsd.org> Subject: Re: Wireless setup iwn Message-ID: <179b97fb1002251259h44521d0fgca7b73fd5e1346d0@mail.gmail.com> In-Reply-To: <SNT103-W65999D0747932AD666B4AD9A400@phx.gbl> References: <SNT103-W65999D0747932AD666B4AD9A400@phx.gbl>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, Feb 25, 2010 at 2:45 PM, Marwan Sultan <dead_line@hotmail.com> wrot= e: > > Hello List, > > > > =A0well im sure its a small mistake here or there. > > =A0I know driver works with PCBS perfectly, but i cannot manualy configur= e it. > > =A0something missing.. > > > > =A0its iwn wireless driver, here are the settings : > > > > /boot/loader.conf > > > > legal.intel_iwn.license_ack=3D1 > > if_iwn_load=3D"YES" > > wlan_scan_ap_load=3D"YES" > wlan_scan_sta_load=3D"YES" > wlan_wep_load=3D"YES" > wlan_ccmp_load=3D"YES" > wlan_tkip_load=3D"YES" > > > /etc/rc.conf > > > > wlans_iwn0=3D"wlan0" > > ifconfig_wlan0=3D"WPA DHCP" > > > > /etc/wpa_supplicant.conf > > > > network=3D{ > > > =A0 =A0 =A0 =A0ssid=3D"SSID" > =A0 =A0 =A0 =A0wep_key1=3D"PASSWORD" > =A0 =A0 =A0 =A0} > > > > ------------------------------------------------------------- > > > > Its Associated but no ip, its always 0.0.0.0 and sometimes an error of > > multicast call back.. > > > > I tried to add in /etc/rc.conf inet 192.168.0.11 netmask 255.255.255.0 in= stead of DHCP > > but same results. > > > > Any hints please? > > > > Thank you. > > > > Marwan > > _________________________________________________________________ > Hotmail: Free, trusted and rich email service. > http://clk.atdmt.com/GBL/go/201469228/direct/01/_________________________= ______________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.o= rg" > Are you running 8.0-RELEASE? You may be better off running the 8-STABLE, as Bernhard Schmidt (and others) have committed several major updates to the driver. -Brandon
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?179b97fb1002251259h44521d0fgca7b73fd5e1346d0>