From owner-freebsd-hackers Sat Jun 7 08:47:40 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id IAA22046 for hackers-outgoing; Sat, 7 Jun 1997 08:47:40 -0700 (PDT) Received: from luke.pmr.com ([206.224.65.132]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id IAA22041 for ; Sat, 7 Jun 1997 08:47:37 -0700 (PDT) Received: (from bob@localhost) by luke.pmr.com (8.8.5/8.7.3) id KAA01101; Sat, 7 Jun 1997 10:46:34 -0500 (CDT) Message-ID: <19970607104634.19370@luke.pmr.com> Date: Sat, 7 Jun 1997 10:46:34 -0500 From: Bob Willcox To: hackers mailing list Subject: Does SMC9332BDT work in 2.2.2R?? Reply-To: Bob Willcox Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.75e Sender: owner-hackers@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk I am trying to install some SMC9332BDT ethernet cards in some of my systems here with no success. Upon booting the system with the card installed, initially the lights on the card come on (and flash) and the light on the hub lights. Once the card is detected during the boot probe all lights go off (no unusual messages are displayed, everything looks ok in the messages, see below) and as the boot-up progresses its obvious the network is not up (all network related daemons hang) and I never get to a login prompt (at least not within the 5-10 minutes I've waited). Does anybody have any suggestions/help? It looks like (from the cvs log for if_de.c) that the driver in 2.2.2R should support this card (using the 21140A chip) but I am not having much luck. Boot messages for de0 are: Jun 7 09:47:16 luke /kernel: de0 rev 32 int a irq 9 on pci0:9 Jun 7 09:47:16 luke /kernel: de0: 21140A [10-100Mb/s] pass 2.0 Jun 7 09:47:16 luke /kernel: de0: address 00:e0:29:00:ec:81 Jun 7 09:47:16 luke /kernel: de0: enabling 100baseTX port Thanks, -- Bob Willcox Anyone who is capable of getting themselves made bob@luke.pmr.com President should on no account be allowed to do the job. Austin, TX -- Douglas Adams, "The Hitchhiker's Guide to the Galaxy"