Date: Tue, 4 Nov 2003 12:12:44 +0200 From: bivol@vip.bg To: freebsd-questions@freebsd.org Subject: Re: RedHat 7.2 -> Freebsd - BIG PROBLEN Message-ID: <1067940764.3fa77b9c147c0@mail.orbitel.bg>
next in thread | raw e-mail | index | archive | help
-----------------
lan 192.168.1.0
-----------------
LAN |
|
|
------------------
rl0 192.168.1.1
ROUTER
fxp0 193.108.24.75
--------------------
LAN |
|
|
-------------------
ISP 193.108.24.145
--------------------
Once again:
Forget about
> > /sbin/route add -net 192.168.17.0/24 eth0
It was used for lan provided by isp. I never use it I do not need it.
So the situation is the following.
Internal LAN - Router - ISP LAN
The connection between me and the provider is 100Mb LAN.
The other users in the *ISP LAN* use VPN to connect to him. I do not use VPN
that is why he gave this ip and this strange mask. And it is working with
RedHat 7.2
BIVOL
Luke Kearney <lukek@meibin.net>:
> OK , now I am really confused.@But what about trying something like
> this ?
>
> ifconfig fxp0 inet 193.108.24.75 netmask 255.255.255.255 up
> route add default -interface fxp0
> route add -host 193.108.24.145 -interface fxp0
> route add -net 192.168.17.0/24 -interface fxp0
>
>
> Are you using one NIC in this machine to run your ppp sessions as well
> as route to the local net ? If you are using a DSL/Cable connection and
> have ppp setup then there should be a ppp interface either ppp or tun in
> which case the best way to set the default gateway is
>
> route add default -interface tun0
>
> if you can take the time to create a simple diagram of what you are
> doing I might be able to help more.
>
> HTH
> LK
>
>
> On Tue, 4 Nov 2003 11:22:21 +0200
> bivol@vip.bg granted us these pearls of wisdom:
>
> > Hi,
> > Actually this box has ONLY one ip, no aliases.
> > This line:
> > > > /sbin/route add -net 192.168.17.0/24 eth0
> > Could be igonred.
> >
> > I do not need them. I just need my primary IP to be with such mask..However
>
> > I'll try to configure virtual interface. And forward the traffic through
> it.
> >
> > BIVOL
> >
> > Luke Kearney <lukek@meibin.net>:
> >
> > >
> > > On Tue, 4 Nov 2003 10:56:44 +0200
> > > bivol@vip.bg granted us these pearls of wisdom:
> > >
> > > > Hi,
> > > > I'm trying to migrate my router from RedHat 7.2 to FreeBSD.
> > > > Please see the following scrit - it works fine under linux:
> > > > ===========
> > > > touch /var/lock/subsys/local
> > > > sleep 5
> > > > /sbin/ifconfig eth0 down
> > > > sleep 1
> > > > /sbin/ifconfig eth0 193.108.24.75 netmask 255.255.255.255 up
> > > > sleep 2
> > > > /sbin/route add -host 193.108.24.145 eth0
> > > > /sbin/route add default gw 193.108.24.145
> > > > /sbin/route add -net 192.168.17.0/24 eth0
> > > >
> > > > ============
> > > >
> > > > I could never make that work for FREEBSD.
> > > >
> > > > ifconfig fxp0 down
> > > > ifconfig fxp0 193.108.24.75 netmask 255.255.255.255 up
> > > > route add -host 193.108.24.75 193.108.24.145 255.255.255.255
> > > > or
> > > > route add -host 193.108.24.75 193.108.24.145
> > > >
> > > > Looks impossible at freebsd...It says Network Unreachable. I read the
> man
> > > page
> > > > of route; It says this happens when the host is more than one hop away.
> But
> > > it
> > > > is working with my old RedHat.
> > > >
> > > >
> > > > Typing just:
> > > >
> > > > route add -host 193.108.24.75 193.108.24.145
> > > >
> > > > works, but I need 255.255.255.255 mask to have inet access
> > > >
> > > > I posted to the local group but the only guy that anaswered me says
> that
> > > it
> > > > is not possible.
> > > >
> > > > Please help,
> > > > I just can't believe that freebsd can not do it.
> > > >
> > > > Thanks in advance,
> > > > BIVOL
> > >
> > > Hello,
> > >
> > > If I understand what it is that you are trying to do I think you need
> to
> > > have a bit of a read of the following
> > >
> > > http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/configtuning-
> > virtual-hosts.html
> > >
> > >
> > > This might clear things up for you.
> > >
> > > Cheers
> > >
> > > LK
> > >
> > >
> > >
> >
> >
>
>
>
>
----- End forwarded message -----
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1067940764.3fa77b9c147c0>