Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 20 Sep 1999 00:05:38 +0000 (GMT)
From:      Gary Hampton <garyh@mail.win.bright.net>
To:        Adam Strohl <adams@digitalspark.net>
Cc:        current@FreeBSD.ORG
Subject:   Re: ata drivers
Message-ID:  <Pine.BSF.4.10.9909200004100.2964-100000@mail.win.bright.net>
In-Reply-To: <Pine.BSF.4.10.9909200100020.365-100000@nightfall.digitalspark.net>

next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, 20 Sep 1999, Adam Strohl wrote:

> Remake your acd device, I think you may need a patch to do it.  I had the
> same problem, until I rm-ed the device and remade it.
> 
> - ----( Adam Strohl )------------------------------------------------ -
> -  UNIX Operations/Systems               http://www.digitalspark.net  -
> -  adams (at) digitalspark.net                    xxx.xxx.xxxx xxxxx  -
> - ----------------------------------------( DigitalSpark.NET )------- -
No luck I still just get:
mount_cd9660: Block device required
trying to mount acd0a acd0c acd1a and acd1c
> On Sun, 19 Sep 1999, Gary Hampton wrote:
> 
> > I have been trying to get the ata drivers to work on my system for a
> > a while now but can't seem to mount my cdrom drives. This is what I get on
> > boot up:
> > ata-pci0: <Intel PIIX4 IDE controller> at device 7.1 on pci0
> > ata-pci0: Busmastering DMA supported
> > atapi: piomode=4, dmamode=2, udmamode=-1
> > ata0: master: setting up WDMA2 mode on PIIX3/4 chip OK
> > atapi: DMA transfer mode set
> > acd0: <CRW6206A/1.3A> CDROM drive at ata0 as master
> > acd0: drive speed 1034KB/sec, 512KB cache, DMA
> > acd0: supported read types: CD-R, CD-RW, CD-DA, packet track
> > acd0: supported write types: CD-R, CD-RW, test write
> > acd0: Audio: play, 128 volume levels
> > acd0: Mechanism: ejectable tray
> > acd0: Medium: CD-ROM 120mm data disc loaded, unlocked, lock protected
> > atapi: piomode=3, dmamode=1, udmamode=-1
> > atapi: PIO transfer mode set
> > acd1: < 8X_CD-ROM/ A01> CDROM drive at ata0 as slave 
> > acd1: drive speed 1367KB/sec, 120KB cache
> > acd1: supported read types: CD-DA
> > acd1: Audio: play, 255 volume levels
> > acd1: Mechanism: ejectable tray
> > acd1: Medium: CD-ROM 120mm data disc loaded, unlocked
> > 
> > Is there a trick I need to know to mount this? I have tride mounting
> > /dev/ almost every thing with "cd" in it but no luck the only drive I can
> > mount is /dev/cd0c my scsi cdrom. I was able to mount these drives with
> > the default atapi drivers but my system hung whe I tride to write to the
> > cd-rw drive.
> > 
> > The easiest way to figure the cost of living is to take your income and
> > add ten percent.
> > 
> > 
> > 
> > To Unsubscribe: send mail to majordomo@FreeBSD.org
> > with "unsubscribe freebsd-current" in the body of the message
> > 
> > 
> 
> 
> 



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.10.9909200004100.2964-100000>