Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 29 Apr 2010 12:50:09 -0700 (PDT)
From:      Mark <redtick@sbcglobal.net>
To:        freeb list <freebsd-multimedia@freebsd.org>
Subject:   new'ish low profile pvr150
Message-ID:  <795090.2877.qm@web81205.mail.mud.yahoo.com>

next in thread | raw e-mail | index | archive | help
I bought a low-profile pvr150 card, but after loading the cxm and setting the input with pvr250-setchannel, I get a black screen without audio.
It does not have composit input, just an FM-cable, TV-cable S-video and IR. I've tried both inputs but no joy. Any chance to get it added the the cxm driver?? ;) 

pciconf -lv {section}
cxm0@pci0:6:1:0:        class=0x040000 card=0xc8010070 chip=0x00164444 rev=0x01 hdr=0x00
    vendor     = 'Conexant Inc (Was: Globespan, ICompression Inc)'
    device     = 'iTVC16/CX23416 MPEG Codec'
    class      = multimedia
    subclass   = video


/var/log/messages
cxm0: <Conexant iTVC16 MPEG Coder> mem 0x50000000-0x53ffffff irq 22 at device 1.0 on pci6
cxm_iic0: <Conexant iTVC15 / iTVC16 I2C controller> on cxm0
iicbb0: <I2C bit-banging driver> on cxm_iic0
iicbus0: <Philips I2C bus> on iicbb0 master-only
iicbus0: <unknown card> at addr 0
iicbus0: <unknown card> at addr 0
<2>tveeprom: ivtv version
<2>tveeprom: Hauppauge: model = 25012, rev = C5A3, serial# = 9956065
<2>tveeprom: tuner = TCL MFNM05-4 (idx = 103, type = 43)
<2>tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
<2>tveeprom: audio processor = CX25843 (type = 25)
<2>tveeprom: decoder processor = CX25843 (type = 1e)
 tuner type: 43
 cxm0: Eeprom NTSC
 tuner: type set to 43 (Philips NTSC MK3 (FM1236MK3 or FM1236/F)) by cxm
 tuner: switching to v4l2
 before tuner_command!
 tuner: tv freq set to 61.25
 tuner: tv 0x06 0xb0 0x8e 0x01
<2>cxm 0-0000: Video signal:              not present
<2>cxm 0-0000: Detected format:           NTSC-M
<2>cxm 0-0000: Detected audio mode:       forced mode
<2>cxm 0-0000: Detected audio standard:   no detected audio standard
<2>cxm 0-0000: Audio muted:               yes
<2>cxm 0-0000: Audio microcontroller:     running
<2>cxm 0-0000: Configured audio standard: automatic detection
<2>cxm 0-0000: Configured audio system:   BTSC
<2>cxm 0-0000: Specified standard:        NTSC-M
Apr 29 19:31:57 intel kernel: <2>cxm 0-0000: Specified input:           Tuner
<2>cxm 0-0000: Specified audio input:     Tuner
<2>cxm 0-0000: Specified audioclock freq: 48 kHz
<2>cxm 0-0000: Preferred audio mode:      stereo
cxm0: [ITHREAD]
cxm0: encoder firmware version 0x2060039




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?795090.2877.qm>