Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 3 Jun 2008 01:13:16 +0900
From:      Norikatsu Shigemura <nork@FreeBSD.org>
To:        Sam Leffler <sam@FreeBSD.org>, pyunyh@gmail.com
Cc:        Bill Paul <wpaul@FreeBSD.org>, freebsd-current@FreeBSD.org
Subject:   Re: axe(4) doesn't work (patch to replace obsolete if_watchdog interface)
Message-ID:  <20080603011316.7736c782.nork@FreeBSD.org>
In-Reply-To: <20080602003948.GA83841@cdnetworks.co.kr>
References:  <20080602034630.eb07fe5c.nork@FreeBSD.org> <20080602003948.GA83841@cdnetworks.co.kr>

next in thread | previous in thread | raw e-mail | index | archive | help
Hi sam and yongari!

On Mon, 2 Jun 2008 09:39:48 +0900
Pyun YongHyeon <pyunyh@gmail.com> wrote:
>  > ukphy0: <Generic IEEE 802.3u media interface> PHY 0 on miibus0
>  > ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseSX, 1000baseT, 1000baseT-FDX, auto

> I'm not familiar with USB but this looks like PHY driver problem or
> mishandling of link state change in axe(4).
> Because axe(4) uses ukphy(4), a generic PHY driver, it would be
> even better if you can show me the verbosed boot messages related
> with axe(4)/ukphy(4) or "devinfo -rv | grep oui".

	Thanks for your pointed out!  I didn't notice PHY problem.

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
axe0: <vendor 0x0b95 product 0x1780, class 255/255, rev 2.00/0.01, addr 2> on uhub1
axe0: AX88178, bufsz 4096, boundary 512
miibus1: <MII bus> on axe0
ukphy0: <Generic IEEE 802.3u media interface> PHY 0 on miibus1
ukphy0: OUI 0x1e525e, model 0x0014, rev. 9
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseSX, 1000baseT, 1000baseT-FDX, auto
axe0: bpf attached
axe0: Ethernet address: 00:90:cc:ef:b9:f6
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
ukphy0 pnpinfo oui=0x1e525e model=0x14 rev=0x9 at phyno=0
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20080603011316.7736c782.nork>