Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 4 Jan 2006 16:25:03 +0100
From:      paketix@bluewin.ch
To:        "John Baldwin" <jhb@freebsd.org>
Cc:        freebsd-acpi@freebsd.org
Subject:   Re: dl580g3/amd64: [ACPI] 6.0-RELEASE will not boot with ACPI enabled
Message-ID:  <4392C11D000EBD5C@mssazhb-int.msg.bluewin.ch>
In-Reply-To: <200601031332.55036.jhb@freebsd.org>

next in thread | previous in thread | raw e-mail | index | archive | help

>-- Original-Nachricht --
>From: John Baldwin <jhb@freebsd.org>
>To: paketix@bluewin.ch
>Subject: Re: dl580g3/amd64: [ACPI] 6.0-RELEASE will not boot with ACPI enabled
>Date: Tue, 3 Jan 2006 13:32:54 -0500
>Cc: freebsd-acpi@freebsd.org
>
>
>On Friday 30 December 2005 02:38 am, paketix@bluewin.ch wrote:
>> hi john
>> thanks for your feedback!
>> i created a smp kernel from RELENG_6_0 this morning and tested it on the
>> dl580g3 with acpi enabled - but still the same behaviour...
>> ...the system boots and hangs somewhere after initializing the nics
>>
>> please find the new logs (smp kernel config and boot -v) at
>> http://mypage.bluewin.ch/poe/
>
>So 6.0 doesn't work with ACPI enabled with or without SMP.  Does it work
>with 
>ACPI disabled?
>
>-- 
>John Baldwin <jhb@FreeBSD.org>  <><  http://www.FreeBSD.org/~jhb/
>"Power Users Use the Power to Serve"  =  http://www.FreeBSD.org

sorry for the missing logs
6.0 works when acpi is disabled with or without SMP
i did some further tests today with out of the box RELENG_6_0 kernels (GENERIC
and SMP) - hope that helps to clearify the problem
please find the 'boot -v' logs on my homepage as usual
http://mypage.bluewin.ch/poe/
a few remarks regarding the logs:

- dl580g3_60release-p1_amd64_acpi_bootv.txt
  releng_6_0 kernel uniprocessor amd64 with acpi enabled
  fatal trap 28 after bpf is attached to lo0:

- dl580g3_60release-p1_amd64_noacpi_bootv.txt
  releng_6_0 kernel uniprocessor amd64 with acpi disabled
  boot ok

- dl580g3_60release-p1smp_amd64_acpi_bootv.txt
  releng_6_0 kernel multiprocessing amd64 with acpi enabled
  system resets after bpf is attached to lo0:

- dl580g3_60release-p1smp_amd64_noacpi_bootv.txt
  releng_6_0 kernel multiprocessing amd64 with acpi disabled
  boot ok

- dl580g3_60release-p1smp_i386_acpi_bootv.txt
  releng_6_0 kernel multiprocessing i386 with acpi enabled
  system resets after bpf is attached to lo0:

- dl580g3_60release-p1smp_i386_noacpi_bootv.txt
  releng_6_0 kernel multiprocessing i386 with acpi disabled
  system hangs after reinit of ata0:

let me know if i can do something more
regards, pat




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4392C11D000EBD5C>