Date: Wed, 28 Jul 1999 10:35:06 +0200 (MET DST) From: Stefan Peter <stefan@omega.ailab.sztaki.hu> To: freebsd-questions@FreeBSD.ORG Subject: startx Message-ID: <Pine.GSO.4.05.9907281031280.1644-100000@omega.ailab.sztaki.hu> In-Reply-To: <Pine.GSO.4.05.9907280809000.6821-100000@omega.ailab.sztaki.hu>
next in thread | previous in thread | raw e-mail | index | archive | help
I have got a problem with starting X11. After installing FreeBSD I configured the X11, and the configuration was successful, the server started. I saved the config then I exited. I issued startx but I got the following bellow. What's wrong? What should I fix? Cheers, Peter Stefan XFree86 Version 3.3.3.1 / X Window System (protocol Version 11, revision 0, vendor release 6300) Release Date: December 29 1998 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (see http://www.XFree86.Org/FAQ) Operating System: FreeBSD 3.0-CURRENT i386 [ELF] Configured drivers: SVGA: server for SVGA graphics adaptors (Patchlevel 0): NV1, STG2000, RIVA128, RIVATNT, ET4000, ET4000W32, ET4000W32i, ET4000W32i_rev_b, ET4000W32i_rev_c, ET4000W32p, ET4000W32p_rev_a, ET4000W32p_rev_b, ET4000W32p_rev_c, ET4000W32p_rev_d, ET6000, ET6100, et3000, pvga1, wd90c00, wd90c10, wd90c30, wd90c24, wd90c31, wd90c33, gvga, ati, sis86c201, sis86c202, sis86c205, sis86c215, sis86c225, sis5597, sis5598, sis6326, tvga8200lx, tvga8800cs, tvga8900b, tvga8900c, tvga8900cl, tvga8900d, tvga9000, tvga9000i, tvga9100b, tvga9200cxr, tgui9400cxi, tgui9420, tgui9420dgi, tgui9430dgi, tgui9440agi, cyber9320, tgui9660, tgui9680, tgui9682, tgui9685, cyber9382, cyber9385, cyber9388, cyber9397, cyber9520, 3dimage975, 3dimage985, clgd5420, clgd5422, clgd5424, clgd5426, clgd5428, clgd5429, clgd5430, clgd5434, clgd5436, clgd5446, clgd5480, clgd5462, clgd5464, clgd5465, clgd6205, clgd6215, clgd6225, clgd6235, clgd7541, clgd7542, clgd7543, clgd7548, clgd7555, clgd7556, ncr77c22, ncr77c22e, cpq_avga, mga2064w, mga1064sg, mga2164w, mga2164w AGP, mgag200, mgag100, oti067, oti077, oti087, oti037c, al2101, ali2228, ali2301, ali2302, ali2308, ali2401, cl6410, cl6412, cl6420, cl6440, video7, ark1000vl, ark1000pv, ark2000pv, ark2000mt, mx, realtek, s3_virge, AP6422, AT24, AT3D, s3_svga, NM2070, NM2090, NM2093, NM2097, NM2160, NM2200, ct65520, ct65525, ct65530, ct65535, ct65540, ct65545, ct65546, ct65548, ct65550, ct65554, ct65555, ct68554, ct69000, ct64200, ct64300, mediagx, V1000, V2x00, p9100, spc8110, generic Using syscons driver with X support (version 2.0) (using VT number 4) XF86Config: /etc/XF86Config (**) stands for supplied, (--) stands for probed/default values (**) XKB: rules: "xfree86" (**) XKB: model: "pc101" (**) XKB: layout: "us" (**) Mouse: type: Microsoft, device: /dev/mouse, baudrate: 1200 (**) Mouse: buttons: 3 (**) SVGA: Graphics device ID: "Primary Card" (**) SVGA: Monitor ID: "Primary Monitor" (--) SVGA: Mode "640x480" needs hsync freq of 31.38 kHz. Deleted. (--) SVGA: Mode "320x240" needs hsync freq of 56.33 kHz. Deleted. Warning: The directory "/usr/X11R6/lib/X11/fonts/local" does not exist. Entry deleted from font path. Warning: 'fonts.dir' not found (or not valid) in "/usr/X11R6/lib/X11/fonts/100dpi". Entry deleted from font path. (Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/100dpi"). Warning: 'fonts.dir' not found (or not valid) in "/usr/X11R6/lib/X11/fonts/Type1". Entry deleted from font path. (Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/Type1"). Warning: 'fonts.dir' not found (or not valid) in "/usr/X11R6/lib/X11/fonts/Speedo". Entry deleted from font path. (Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/Speedo"). Warning: 'fonts.dir' not found (or not valid) in "/usr/X11R6/lib/X11/fonts/100dpi". Entry deleted from font path. (Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/100dpi"). (**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc:unscaled,/usr/X11R6/lib/X11/fonts/75dpi:unscaled,/usr/X11R6/lib/X11/fonts/misc,/usr/X11R6/lib/X11/fonts/75dpi" (--) SVGA: PCI: Tseng Labs ET4000W32P revD rev 0, Memory @ 0xe0000000 (--) SVGA: Ramdac: ch8398 (--) SVGA: Detected W32p bus type (0x1c): PCI. (--) SVGA: ET4000: Initial hibit state: high (--) SVGA: chipset: ET4000W32p_rev_d (--) SVGA: videoram: 1024k (**) SVGA: clocks: 25.10 28.32 32.62 35.85 40.15 22.53 31.56 37.64 (**) SVGA: clocks: 50.19 56.65 65.25 71.71 80.31 45.07 63.10 75.29 (**) SVGA: Using 8 bpp, Depth 8, Color weight: 666 (--) SVGA: Maximum allowed dot-clock: 86.000 MHz (--) SVGA: There is no mode definition named "640x480" (--) SVGA: Removing mode "640x480" from list of valid modes. (--) SVGA: There is no mode definition named "320x240" Fatal server error: No valid modes found. When reporting a problem related to a server crash, please send the full server output, not just the last messages X connection to :0.0 broken (explicit kill or server shutdown). To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.GSO.4.05.9907281031280.1644-100000>