Date: Tue, 09 Mar 1999 14:16:48 -0500 From: "Pascal Abessolo Nguema" <pabessolo@Techolap.COM> To: FreeBSD-questions@FreeBSD.org Subject: bugs or missconfiguration ? Message-ID: <36E573A0.4BD44500@techolap.com>
next in thread | raw e-mail | index | archive | help
--------------030D09035861A420EFC356D0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Hi, I have a dual pentium pro system, 64 RAM and two hard drive: 1 scsi (the linux boot) and 1 IDE (windows games boot disk), QUANTUM Fireball the two of them. My scsi drive is hooked to a Adaptec AHA-2940AU host. I compiled two linux kernel with SMP: a 2.2.2 and a 2.0.36 kernel. In the xconfig, i choosed to load the aic7xxx in the kernel, and the rest in modules (other adapters i mean, not the scsi support). The two kernel behave differently: error message when booting the 2.2.2 linux kernel: > (scsi0) found at PCI 15/0 > Narrow Channel, scsi id=7, 3/255, SCBs > BIOS Enabled, IO port 0x9000, IRQ 9 > IO Memory at 0xe10010000, MMAP Memory at 0xc4800000 > (scsi0) SE low byte termination enabled > SE High byte termination enabled > Download sequencer code...419 instructions downloaded > reset channel.. > > scsi: Adaptec AHA274x/284x/294x (EISA/VLB/PCI-FAST SCSI) 5.1.10/3.2.4 > scsi: 1 host. > scsi: aborting command due to timeout: pid 0, scsi0, channel 0, id 0, lun 0, 0x > 00 00 00 00 00 00 > (scsi0: 0:0:0) > abort called with Buggus scsi_Cmnd pointer. > and the kernel stop loading. error messages booting with 2.0.36 kernel: none, it boot fine Why is that ? Please help. I'm new to linux. --------------030D09035861A420EFC356D0 Content-Type: text/html; charset=us-ascii Content-Transfer-Encoding: 7bit <!doctype html public "-//w3c//dtd html 4.0 transitional//en"> <html> Hi, <p>I have a dual pentium pro system, 64 RAM and two hard drive: 1 scsi (the linux boot) and 1 IDE (windows games boot disk), QUANTUM Fireball the two of them. <br>My scsi drive is hooked to a Adaptec AHA-2940AU host. <br>I compiled two linux kernel with SMP: a 2.2.2 and a 2.0.36 kernel. In the xconfig, i choosed to load the aic7xxx in the kernel, and the rest in <br>modules (other adapters i mean, not the scsi support). <br>The two kernel behave differently: <p>error message when booting the 2.2.2 linux kernel: <blockquote TYPE=CITE> <pre>(scsi0) found at PCI 15/0 Narrow Channel, scsi id=7, 3/255, SCBs BIOS Enabled, IO port 0x9000, IRQ 9 IO Memory at 0xe10010000, MMAP Memory at 0xc4800000 (scsi0) SE low byte termination enabled SE High byte termination enabled Download sequencer code...419 instructions downloaded reset channel.. scsi: Adaptec AHA274x/284x/294x (EISA/VLB/PCI-FAST SCSI) 5.1.10/3.2.4 scsi: 1 host. scsi: aborting command due to timeout: pid 0, scsi0, channel 0, id 0, lun 0, 0x 00 00 00 00 00 00 (scsi0: 0:0:0) abort called with Buggus scsi_Cmnd pointer.</pre> </blockquote> and the kernel stop loading. <br>error messages booting with 2.0.36 kernel: none, it boot fine <p>Why is that ? <br>Please help. I'm new to linux. <br> <br> <br> </html> --------------030D09035861A420EFC356D0-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?36E573A0.4BD44500>